Construction of Govt. Sr. Sec. School Balh, Tehsil Bangana and Distt. Una Under R.M.S.A.

Amount

Excavation in foundation trenches etc. in all kinds and classification of soil such as pick work, pick jumper work, pick and jumper work, blasting work, (soft or hard rock), saturated soil, dewatering including wedging out rock where blasting work is prohibited, chiseling or any other mixed variety of soil de-watering and/or removal of slush, stacking the excavated soil not more than 3 mtrs. (Three metres) clear from the edge of excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers when required into plinths, sides of foundations etcetra, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per HPPWD specification,approved Drawing,design to the entire satisfaction and direction of the Engineer-in Charge including carriage of material within all leads and lifts and other incidentals. The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification and direction of Engieer in charge including carriage of materials within all leads lifts and other incidentals. The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings shelves and the like etcetera In all thickness in any floor level. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.:

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilivers, girders and lintels such as soffits of beams, beam haunching, cantilevers girder, bressumers and lintels of all height/thickness. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.:

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair Case with sloping of stepped soffits excluding landing but including preparing of the surface and finishing of nosing upto floor to all level. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..:

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls under 20cm (Twenty centimetres) wide including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt. .

Providing and laying cement concrete 1:4:8 ( One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) mechanical mixed and curing complete excluding cost of form work in foundation and plinth as per the entire satisfaction and direction of Engineer-in-charge. Including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying a coat of hot bitumen maxphalt 80/100 (Eighty byu hundred) using 1.70kg ( One decimal seven kilogram) per sqm on damp proof coarse after cleaning the surface with a piece of cloth lightly soacked with kerosene oil.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals .The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and laying cement work of grade M-20 (M-twenty) design mix to obtain the minimum crushing strength of 20N/mm2 (twenty Newton per millimetre square) with cement contents should not be less than 380Kg (three hundred eighty kilogram) per cubic metre mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement work for reinforced concrete in suspended floors , roofs landings and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level, including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying design mix cement concrete M25 ( M- Twenty five) with characteristics strength of 25 N/mm2( Twenty five Newton per meter square) with minimum cement content of 400.00 kg( four hundred kilogramme), mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level as per HPPWD specifications, approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals.The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and laying design mix Reinforcement cement concrete M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per millimeter square) with minimum cement content of 310.00 kg( three hundred ten kilogram)per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost form work and reinforced for reinforced concrete work in stair case (except spiral stairs cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level in all depth/height and HPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying upto all floor levels reinforced cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum crushing strength of 20N/mm2 (twenty Newton per millimetre square) with cement contents should not be less than 380Kg (three hundred eighty kilogram) per cubic metre to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and compecting with vibrated for compecting reinforced concrete in Moulding as in cornices wuindow sills etcetra not exceeding fifteen centimetre in girth, including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 mix (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) for reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level centring/form work and curing complete excluding cost of reinforcement including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing mild steel/tor steel(TATA /SAIL make) reinforcement for RCC work including bending, binding and placing in position complete as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the cement surface complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 ( 1 cement : 3 sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Brick work using common burnt clay second class building bricks in cm 1:6 (one cement : six coarse sand) in foundation and plinth as per HPPWD specifications, approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Second class brick work using common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:6 (1 cement : 6 sand) including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Second class brick work using common burnt clay building bricks in superstructure above plinth level upto floor two Level levels in cement mortar 1:6 (1 cement : 6 sand) including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Second class brick work using common burnt clay building bricks in superstructure above Square and rectangular pillars in super structure in cement mortar 1:6 (1 cement : 6 sand) including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Second class brick work using common burnt clay building bricks in superstructure above Square and rectangular pillars in super structure above floor two Level three level in cement mortar 1:6 (1 cement : 6 sand) including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Half brick masonry in common burnt clay building bricks in cm 1:4 (one cement : four coarse sand) using second class bricks in super structure in all floor level as per HPPWD specifications,approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame.as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 300x16mm (Three hundred in to Sixteen milimetres) anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etc complete as per HPPWD specifications, approved Drawings, design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 250x10mm (Two hundred fifty in to Ten milimetres) aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing aluminium handles anodized transparent 125mm (One hundred twenty five millimeter)nominal size as per HPPWD specifications, approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 100mm(hundred milimetre) bright finished brass door stopper with rubber cushion screw etc to sent shutter thickness. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing 100mm(hundred milimetre) bright finished hard drawn hooks and eyes.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete. 25 mm thick as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing Complete.as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Extra for making moulded nosing in terrazzo including returned moulded ends and angles to mouldings.as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and laying red sand stone slab flooring 40mm average thick on 20mm average thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish complete.and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and layingCement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement. 40mm Thick nd direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete.and as direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the Wall etc.and as direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing on wall face PVC deplast accessories of Phenolex/Vectus or its equivalent make for rain water pipes including filling the joints with approved adhesive complete. as per direction of engineer in charge with in all leads lifts and other incidentals PVC plain bend 150mm(one hundred fifty milimetre) dia as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing on wall face PVC deplast accessories of Phenolex/Vectus or its equivalent make for rain water pipes including filling the joints with approved adhesive complete. as per direction of engineer in charge with in all leads lifts and other incidentals PVC Concter Type Bend bend 150mm(one hundred fifty milimetre) dia as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing on wall face PVC deplast accessories of Phenolex/Vectus or its equivalent make for rain water pipes including filling the joints with approved adhesive complete. as per direction of engineer in charge with in all leads lifts and other incidentals PVC plain shoe150mm(one hundred fifty milimetre) dia as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Steel work (TATA/SAIL) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In grating, framed guard bars ladders, railing brackets and similar works as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 50mm dia hand rail of M.S. hollow pipe with round end at Two level i.e. 75 cm and 90cm height and extend 30cm beyond the top and bottam of the ramp and 25 mm dia M.S. pipe blaster welded to 50 mm dia MS pipe embedded in cement concrete 1:3:6 (1cement 3 Sand 6 graded stone aggregate 20 mm nominal Size) as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely.as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing angle iron single robate door frame manufactured from M.S. Angle iron section including hings ,Jamb bead , and if required angle thashold of mild steel single 40x40x5 mm and M.S. Flate 50 x5 mm to make square hollow section and hold fast on M.S. flate 200x40x3 mm welded all corners and joints and embeded in c.c. block 1:3:6, 100X100X100 mm size including hinges and applying a coat of red lead paint and fixing in position complete as per archtectural drawing as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing Steel window made of frame with M.S. Channel 75x40 mm mad M.S. flate 75x5 mm to make one frame , providing double robate with making Square steel section with mild steel flate of 20x4 mm and 12x4 mm shutter of z section glasss panes of 4 mm thiuck in glaged panes and wire guage of designation 85 G with wier of 0.56 mm in wire gauge pannel and fixed glaging with angle and Tsection 25x25x3 mm and M.S. flate of 12x4 mm in sash bars duly welded of all corners and joints properly holdfast of M.S. Flate 200x50x5 mm duly welded of corner of Joint of all steel sections embeded in C.C. block 1:3;6 , 100x100x100x mm size including fitting such as handels tower bolts hooks nad eyes and applying a coat of red lead paint and fixing in position complete as per architectural drawing.as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete (a) With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome.and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters Enamel paint other than white and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Applying priming coat of ( Asian/Dullux paint ) over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing with white lead for priming wood primer. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign atter,sand papering & stoping With enamel paint other than white. and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels. as direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

15mm(fifteen milimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles no exceeding 80mm (eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six coarse sand) as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

15mm(fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles no exceeding 80mm (eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six coarse sand) as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

15mm(fifteen milimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering i/c bends at Corner (as shown in each drawing)upto floor level including arrises, internal rounded angles, chamfers and/or rounded angles no exceeding 80mm (eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six coarse sand) as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

White washing with lime on Undecorated ceiling and / or sloping roofs and in all floors to give an even shade including throughly brooming the surface to remove all dirt , dust mortor dust and other foreigen matter including carriage of materials within all leads, lifts and other incidental the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Finishing wall with weather proof exterior grade emulsion of ( ASAIN/NEROLAC/ICI-DULUX ) approved design (Apex Ultima Asian Paints) or its equivalents on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etc. including coarse sand papered smooth complete including entire carriage of materials in all leads and lifts as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Shiv Kumar

Jagdish Ram

Puri & sons construction company