SPL REPAIR TO CERTAIN ELECTRIC WORKS AT KG TOP, 169 MH AND 834 FD WKSP AND SPL REPAIR TO BLDG NO T-48 AT BDE SIG COY UNDER GE 881 EWS

Amount

Supply and fix in replacement Street light bracket made out of GI tubing 40mm bore, light grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of F.I. 50 x 6mm with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint complete all as specified and directed.

Factory made PVC pole mounted street light junction box, three phase and neutral, 415 volts, weather proof of size 325x220x150mm depth, accommodated with properly insulated 04 Nos of aluminium busbar of 40 Amps rated current cap, 02 Nos of insulators per each busbar, nut bolts & clamps (25x3) for fixing of junction box etc. and including MCB SPN 6 Amps - 01 Nos, for connecting of security light fittings, with hinged door and locking bolt complete all as directed. Make : Sintex, Model No : GSJB - 3726 or its equivalent make as given in PS.

Energy efficient LED light fitting, 45W, input voltage 110V to 280VAC, 50Hz with ingress protection IP 66, LM 80, stranded luminries with efficiency 100lumen/Watt, with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70, PF>0.95, with short circuit & reverse circuit protection against 10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50oC, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 45W=10%W, rated lumens, 120o view angle, constant current type driver having THD<10%, including all fixing arrengment like clamps, nuts, bolts, washers, 35W LED rod lamp (havng PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc.including bracket complete all as specified and as directed

Dismantling of ACSR conductor any type complete all as specified & directed.

Dismantling of insulator any type complete all as specified and directed.

S&F in replacement of bus bar chamber of size 600x600x450mm, TPN, suitable of 3 phase 433V outdoor type fabricated out of 3.15mm thick MS sheet with 300A rated aluminium busbar 4Nos., PVC sleeves (coloured red, yellow, blue and black) with suitable locking arrangments and four legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type C1 using 20mm graded stone aggregates alongwith all necesary cable connections, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed

Supply, laying, connecting, testing and commissioning in trenches/on floor or passing through pipe/ under road crossing XLPE Insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminum conductor, 1100 volts grade, cross sectional area 120 sq mm, 3.5 core complete all as specified and directed.

All as per srl Item No.7 her in before but 70 sq mm 3.5 core.

All as per srl Item No.7 her in before but 50 sq mm 3.5 core

All as per srl Item No.7 her in before but 35 sq mm 3.5 core

All as per srl Item No.7 her in before but 25 sq mm 3.5 core

All as per srl Item No.7 her in before but 16 sq mm 4 core

All as per srl Item No.4 her in before but 10 sq mm 2 core

Earthing for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto test point and connected to earth dolly and PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt 15cm thick layers at around the earth plate, watering pipe 15mm medium grade of galvanized iron and 40mm bore GI pipe light grade for protection of GI strip and funnel, as shown in electrical plate No 3 of SSR Part-I 2009, including testing on completion complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed

Removing excavated material (soil) to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed

Supply ,laying and fixing DWC HDPE pipe confirming to IS-14930(Pt-II) for protection of power cable (orage in colour) of size 90 mm dia complete with fittings and including cutting , jointing and clamping all as specified and directed .

Cable route indicator, duly engraved with 'LT CABLE 1100 VOLT' on cast iron round plate 100 mm dia with provision of 500 mm long (minimum) single leg/stand of angle iron 50 x 6 mm, welded/riveted on back side of plate, fixed and grounted in position with PCC type C-1, block of suitable size complete. MAKE : JAIPURIA, RAYCHEM, RASHTRIYA.

Supply and fix in replacement GI tubing light grade with all fitting for protection of cable at road crossing 50mm dia complete all as specified and directed .

LED flood light 50 watt 230 V AC outdoor type with thermal mangement in multiple optics and equipped with IP66 protection, with impact and corrision resistant complete with driver and lamp. Make: Havells/ Crompton Greaves/ Pillips

PVC insulated PVC sheathed multi core flexible cable copper conductor 1100 volts grade conforming to IS-694/2010 of size 1.5 Sqmm 3 core incl 25 mm PVC conduit from junction box to light fittings connecting up complete all as specified and directed by EIC.

Supply & laying in trenches/on floor or passing through pipe/ under road incl testing of XLPE Insulated screened PVC bedded galvanized steel strip or wire armoured electric power, cable (heavy duty) with aluminum conductor, 1100 volts grade, cross sectional area 25 sq mm, 3.5 core passing through pipe or on pole or on wall or crossing the road.including lugs for coonection of joints.

S & F laying, connecting, 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or circular of size of aluminum conductor 4 Sqm 2 core stranded counductor including taking down unsv cable of any type/size, all completed as specified and directed.

Supply, laying and fixing DWC HDPE pipe confirming to IS-14930(Pt-II) for protection of power cable (orange in colour) of size 50 mm dia complete with fitting and including cutting, jointing and clamping all completed as specified and directed.

S & F in repair of PVC conduit non matalic rigid of size 25 mm dia (external) incl all accessories use for fixing of conduit on wall and ceiling etc completed as specified and directed.

Supply and replacement in repair of GI tubing light grade with all fitting for protection of cable at road crossing 40mm bore complete all as speified and directed.

Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc complete.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light point controlled by one, one way switch 6 amp.

One light point controlled by two nos two way switches 6 amp.

One fan/Exhaust Fan point controlled by one way switch.

One socket outlet 3 pin 5/6 Amps on same board.

One socket outlet 3 pin 5/6 Amp on independent board.

All as per item No 30 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board .

ALL as per item No 30 for One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

Switch piano flush type single pole one way 6 Amp ISI Marked complete all as specified and directed.

Switch piano bell push flush type 5 Amp single pole one way (ISI marked) complete all as specified and directed.

Switch flush type single pole one way 16 Amp ISI Marked. complete all as specified and directed.

Socket outlet 3&5 pin, 6 Amp flush type ISI marked complete all as specified and directed.

Socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked . complete all as specified and directed.

Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body ISI marked complete all as specified and directed.

Stepped type electronic fan regulator with 5 steps regulation, flush type on the existing phenolic laminated sheet, etc. as required complete all as specified and directed.

Piano type switch, 2 way, 6 Amps, flush type, all as specified as directed.

Switch socket combination 5 pin, 6 Amp, flush type all as specified and as directed.

Switch socket combind 2 in 1, 5 and 15 Amp flush type all as specified and as directed.

Supply and fixing in repair inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in repair for LED panel round slim 12 W 4000K, compact die cast edge lit panel, Recess mounted round fixture with opal diffuser complete. MAKE: HAVELLS TRIM COSMO SURFACE ROUND or its equivalent in other specified in PS

LED building security light made up of pressure die cast housing with toughned glass and individual high power LEDs with capacity 35 watt including LED trip,5700K,IP66 protection and impact resistence of IK 07 suitable for pole or dia 40 mm max including bracket ,angle and fixing material including taking down existing complete all as specified and directed.

S&F in repair distribution board , IP 43 in sheet metal enclosure duly flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS ,SPN ,08 Way (double door) copmplete all as specified

MCB SPN 40 Amps 240V, "C' series complete all as specified and directed.

MCB single pole 6 to 32 Amps, 10 KA, "C' series complete all as specified and directed.

M&L submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC casing caping 25mm dia ISI marked as per IS specification fixed on wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, casing capping and accessories will be measured as one length complete all as specified and directed .

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 25 Sqmm 2 core complete all specified and directed.

M & L for earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all specified and directed.

GI Tubes, 40 MM bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Inverter LED Lamp, CDL, 9/10 watt, B22 base all as specified and as directed.

S&F Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz, incl taking down old u/s complete all as specified and as directed

MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed.

MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.

All as per item No 30 but point wiring with 4 sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt grade and 4 sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

All as per item No.30 but point wiring with 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspebded by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire one twin core flat of size 16 sqmm sold aluminium conductor.

LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades, complete all as specified and directed by Engineer-in-Charge.

M&L for rewinding the ceiling fan 1200mm Sweep with the same gauge of copper winding wire as well as number of turns and reassembling the fan after replacing the unserviceable spares like bushes, shafts, fasteners, bearings, capacitors and flexible cord for putting fan in serviceable condition including refixing the same after carrying out necessary repairs to original place all as directed by Engineer-in-Charge.

Painting of ceiling fans and writing of MES No on fans in situ with synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, complete all as specified and directed by Engineer-in-Charge.

Ceiling fans complete with three blade, down rod, accessories 230V, 1200mm sweep, BLDC fan with 5 star rating including fan refulator complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed

M&L river sand as in sand cushioning to under ground cable including punning down all as directed.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified.

M&L for Making bore to road/cement path/hard standing/Road for providing GI pipe 40mm both end socketed for passing armoured cable incl making good the disturbed surface complete all as specified.

Bus bar chamber of size 600x600x450mm suitable of 3 phase 433V outdoor type fabricated out of 3.15mm thick MS sheet with 300A rated aluminium busbar 4Nos., PVC sleeves (coloured red, yellow, blue and black) with suitable locking arrangments and four legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type C1 using 20mm graded stone aggregates alongwith all necesary cable connections, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed

Earthing complete with galvanised earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including GI wire as earth lead 4.0 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of brass and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and directed.

Supply and fixing LED lights fitting 1x16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 4 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified.

S&F electric water heater, storage type steel body with copper inner tank and heating elements up to 2 kw capacity 25 ltrs, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piee etc.

Supply and laying , galvanised iron tubes 'medium grade of size 15 mm with all fitting and fixed complete all as specified and directed.

PVC connection heavy duty , nylon braided, suitable for hot water, with brass alloy chromium plated nuts and nylon washers complete of size15mm dia x 450 mm long all as specified and as directed.

M&L for Chromium plated brass, stop valves 15mm dia bore, high pressure, both ends screwed in side / out side all as specified and as directed

M&L for bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, Chromium plated,fancy type 15mm dia bore all as specified and as directed .

M&L for cutting the existing GI pipe line for altration or addition , and inserting the TEE sutable for connecting GI line of size 15 to 25 mm bore all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 3 core complete all as specified and directed

S&F energy efficient LED light fitting, 35W, input voltage 110V to 280VAC, 50Hz with ingress protection IP 66, LM 80, stranded luminries with efficiency 100lumen/Watt, with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70, PF>0.95, with short circuit & reverse circuit protection against 10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50oC, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 35W=10%W, rated lumens, 120o view angle, constant current type driver having THD<10%, including all fixing arrengment like clamps, nuts, bolts, washers, 35W LED rod lamp (havng PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc.including bracket complete all as specified and as directed

B/R Portion: -Demolition of cement concrete (including floor tiles, kota stone flooring etc) (un-reinforced) not exc 15cm thick (below of above ground level) complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 sqm and not exc 4 Sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, complete all as specified and directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Cement concrete 25 mm thick type B-1, 1:2:4 (12.5mm graded aggregate) as in flooring, roof etc complete al, as specified and directed by Engr-in-Charge.

75 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site complete all as specified and directed.

10mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of walls and finished the surfaces even & fair without using extra cement complete all as specified and directed.

15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately) complete all as specified and directed.

M&L for 5 mm thick rendering on concrete surfaces such as chajja etc. in cement mortar 1:3, finished fair and even without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any description, including preparation of surfaces, on wall surfaces of any description complete all as specified and directed.

M&L for applying wall care putty 1 to 2mm thick, in two layers on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified. MAKE: ASIAN, BIRLA, JK, WEBER.

Two coats of distemper oil emulsion (OBD) on wall surface of any description including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparation of old plastered or un-plastered surfaces including cornices, pilasters and applying two coats of cement base paint complete all as specified and directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 600mm x 6mm having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) complete all as specified and directed.

Vitrified Ceramic tiles 8 to 9 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge

Complete all as per item No 126 above but on skirting, including 10 mm thick back coat in CM 1:6 complete all as specified and as directed by Engr-in-Charge

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified as directed.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified as directed.

Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge.

Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified and directed.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specified and directed.

S&F for small fittings of 2nd class hard wood, such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new or old wooden surfaces of any description description and applying two coats of creosoting complete all as specified and directed.

M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

S&F, in repair mild steel helical door spring 300mm long stove enameled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F decorative curtain rod 25 dia with decorative head on both end of rod and necessary clamps / fixing brackets, stops, rollers etc complete all as specified and as directed.

PCC type B0 (1:2:4) using 12.5mm graded stone aggt in filling of holdfast and steel door frames etc complete all as specified.

Walling of random rubble stone masonry brought up to course well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

All as per item No 125 above but except stone

M&L for raised pointing to RR masonry in CM 1:4 complete all as specified and directed.

Supply only integral water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer- in Charge. Note: The Preprinted galvalume aluminium zinc GI based profile pattern steel sheet should be TATA Blue Scope Colourbond XRW or Equivalent complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer- in Charge.

Dismantling wooden scantling unframed of any size and shape and refixing the same at the same position after repair of brick or stone masonry wall of the bldg complete all as specified and directed.

M/S BHATT TRADERS (BID ID -3481529)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3482354)

MEELU ENTERPRISES (BID ID -3482495)

M/S MAHALUXMI BUILDERS (BID ID -3480786)

M/S MAJADAD AHMAD CHOUDHARY (BID ID -3481313)

M/S FAIZ AHMED KHAN (BID ID -3482376)

VIKAS ENTERPRISES (BID ID -3476867)