Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
28 Nov 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Narad Muni Gupta
Irugur TOP Installation, Bharat Petroleum Corporation Limited
PLEASE READ CAREFULLY SCOPE OF WORK ATTACHED IN SPECIAL CONDITION OF CONTRACT ok
14324
1000411563
Limited Tender
Works
Irugur TOP Installation
9 Dec 2023
3 Nov 2023
28 Nov 2023
3 Nov 2023
28 Nov 2023
3 Nov 2023
6 Nov 2023 - 16 Nov 2023
LOCATION NAME | Peelamedu Black Oil Depot | Date :
TENDER WORKSHEET - TOILET UPGRADATION @ PEELAMEDU BLACK OIL DEPOT
VENDOR NAME :- | VENDOR CODE:-
SL.NO | Service No. | DESCRIPTION OF WORK | QTY | ABS QTY | UNIT | RATE | AMOUNT | Recommended Make
10 | 9019477 | Supply, installation, testing and commissioning of 5 star rated 2.0 TON split AC with remote, indoor and outdoor unit, stand for outdoor unit, stabilser for AC, required copper piping with insulation, civil works, electrical connection complete of approved make | 1.00 | EA |
20 | 9019284 | Supplying and fixing white glazed vitreous china European water closetwith ISI mark conforming to IS 7231 - wall Mounted Studio type with cistern (EWC) of superior quality 81cmhigh, double trap syphonic pattern, 'P' or 'S' trap, with low level 10 litre low level white P.V.C. cistern with cover with siphon and standard flush fittings, with specified color solid plastic seat cover & lid of superior approved quality, CP brassbar hinges, screws, bolts, rubber, buffers 15mm dia PVC inlet pipeconnection and CP brass angle stopcock fixing EWC to floor withnecessary brass screws, all complete at all leads and lifts as perdrawings, specifications and instructions of the Engineer Incharge. | 2.00 | EA | 0.00 | Hindware, Parryware, Johnson,Jaguar, Cera, Kohler
30 | 9019286 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre PVC. flushing cistern | 2.00 | EA | 0.00 | Hindware, Parryware, Johnson,Jaguar, Cera, Kohler and Wall mounted Push Cock Fauscet in lieu of Flush
Dimensions: 7.0*4.0*3.0 cm
40 | 9019293 | Supplying, fitting and fixing white glazed vitreous china wash basin ofsuperior quality with ISI mark and size 550mm x 430mm, having single ordouble holes with 15 mm CP brass pillar tap, CP brass chain and plugs, 32mm CP brass waste coupling, 32mm CP Brass Bottle trap and unions, 32mm dia PVC flexible waste pipe,15mm PVC inlet water pipe connection, CI cantilever bracketsembedded in 1:2:4 concrete, 15 mm CP brass angle stopcock, etc. fillingthe gaps between basin and wall with white cement etc., pedestal, allcomplete at all leads and lifts as per drawings, specifications andinstructions of the Engineer Incharge.
Surgeon type wash basin of size 660x460 mm | 2.00 | EA | 0.00 | Hindware, Parryware, Johnson,Jaguar, Cera, Kohler
50-1 | 9018964 | Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design at all levels and locations using approved first quality tiles inflooring with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to achieve overall flooring thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment complete with all bye works like covering
with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge. Using 600mm x 600mm x minimum 10mm thk. | 15.00 | M2 | 0.00 | Asian Granito, Kajaria,Nitco,Johnson,Somani
60 | 9018966 | Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design at all levels and locations using approved first quality tiles in skirting with or without spacers, laid using approved tile fixing adhesive and joints filled with white cement mixed with matching pigment complete with all byeworks, curing etc. at all leads and lifts and as per specification / instructions of the EngineerIncharge. Using 600mm x 600mm x minimum 10mm thk. | 4.00 | M2 | 0.00 | Asian Granito, Kajaria,Nitco,Johnson,Somani
50-2 | 9018964 | Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design at all levels and locations using approved first quality wall tiles with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to achieve overall flooring thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment complete with all bye works like covering
with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge. Vitrified Wall Tile Using either 300 mm or 450 mm or 600mm x either 300 mm or 600 mm x minimum 10mm thk. | 35.00 | M2 | 0.00 | Asian Granito, Kajaria,Nitco,Johnson,Somani
70 | 9018981 | Providing and laying Granite flooring including flooring onkitchen counter slabs and wash basin counter slabs with 18mm - 20mm thickmarble stone (sample of marble shall be approved by Entineer-in-charge)over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and jointed with grey/white cement slurry mixed with matching pigment, epoxy touch ups including rubbing, curing, and polishing to edgespolishing to granolithic finish complete with Granite of any size, shape and shade | 1.50 | M2 |
80 | 9007644 | Providing and fixing "B" class UPVC pipes complete with GI /PVC fittings including unions wherever required and clamps : Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall - UPVC 20 mm dia nominal bore | 25.00 | RM |
90 | 9007645 | Providing and fixing "B" class UPVC pipes complete with GI /PVC fittings including unions wherever required and clamps : Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall - UPVC 25 mm dia nominal bore | 40.00 | RM |
100 | 9019368 | Construction of brick masonry inspection chamber with full bricks, in CM1:4 over 150mm thick PCC bedding of 1:4:8 grade, provided with a heavyduty (HD-20) CI cover conforming to IS:1726, of required size,embedding the CI frame in 150 mm thick RCC top slab (1:1 1/2 :3), neatlyfinished including 20mm thick plastering in two layers on both faces inCM 1:3 with water proofing compound mixed at the rate of 2% by weight of cement, benching and rounding with PCC 1:2:4, float coat of neatcement finish on the inner side, etc., all complete includingexcavation, dewatering and backfilling, shuttering, curing etc.,painting the exposed CI cover with three coats of black bitumastic paintat all leads and lifts as per drawings, specifications and instructionsof the Engineer Incharge.
Inside dimensions 600x600x900mm deep for single pipe line | 1.00 | EA |
110 | 9019357 | supplying,fixing and / or laying, jointing and testing heavy duty 6kg/cm2 UPVC pipe ISI marked pipelines including ventilating pipe with all necessaryfittings and accessories like specials, bends, single and / or double,equal/unequal branches of required degrees with or without oval accessdoor, offsets of required projection, hill rest bend,inverted branch of required degree, traps, plugs, cowl, clamps etc., all conforming to IS code , of approved make, with all leads and lifts, all complete as perspecification and direction of Engineer Incharge. 100 MM Dia | 9.00 | RM |
120 | 9019377 | supplying SW yard gully trap of specified size conforming to IS 651,with CI grating 150mm x 150mm and water tight light weight CI covers(not less than 7.5 Kgs) conforming to IS:1726 of size 300x300mm paintedwith two coats of bitumastic paint and seated in cement concrete 1:2:4including brick masonry in CM (1:4) plastered neatly with 15mm thick CM(1:3) on both faces, 150mm thick PCC bed of grade 1:4:8, necessaryexcavation,dewatering, backfilling, curing etc. complete at all leadsand lifts as per drawings, specifications and instructions of theEngineer Incharge. 100x100 mm size P type | 2.00 | EA |
130 | 9019382 | supplying and fixing Heavy Grade Cast Iron floor/Nahani trap of specified size with CP hinged heavy SS grating to be fixed in PCC M15 with 20mm down size aggregateand made water tight with all bye works complete as per the direction ofthe engineer. FLOOR TRAP 100MM OPENABLE | 5.00 | EA |
140 | 7007369 | SANITARY . . SOAK PIT 2.5DIA 3DEE | 1.00 | EA | 0.00 | As per drawing attached
150 | 7007368 | SANITARY . . SEPTIC TANK 15 USERS | 1.00 | EA | 0.00 | As per drawing attached
160 | 9019323 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931- ANGLE COCK 15NB | 9.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
170 | 9019319 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms -BIB COCK 15NB | 2.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
180 | 9019351 | SOAP TRAY | 2.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
190 | 9019352 | SOAP CONTAINER | 2.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
200 | 9019353 | TOWEL RAIL | 1.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
210 | 9019354 | TOWEL RING | 1.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
220 | 9019355 | HEALTH FAUCET | 2.00 | EA | 0.00 | Hindware,Parryware, ESSO,Jaquar
230 | 9019303 | supplying minimum 6mm thick polished float glass mirror, bevelled edge,of approved make fixed to with 6mm thick marine plywood sheet backingwith necessary beading, fixing arrangements all complete at all leadsand lifts as per drawings, specifications and instructions of theEngineer Incharge. | 1.00 | M2 | 0.00 | Modi Float / Sant Govino
240 | 9018794 | Supplying and laying in postion RCC of specified nominal mix using 20mm anddown size graded crushed stone aggregate for columns, beams slabs and soffits, staircases, lintels etc.of all typesincluding placing of concrete,supplying pockets,openings, recesses,rendering if reqd. to give a smooth and even surface etc. all complete(excluding the cost of reinforcement, but including the cost of centringand shuttering)for all heights above plinth level in any shape,position, thickness etc. all complete as specified and directed. Onlysteel shuttering will be used so as to obtain required finish. Theheight of shuttering shall not exceed 1.5 m per lift of concrete.: 1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone aggregate 20 mm nominal size) | 0.50 | M3 |
250 | 9018813 | Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming to IS 1786 in position for RCC worksincluding straightening, cutting, bending, placing in position andbinding with 16 SWG black soft annealed binding wire at everyintersection, supplying and placing appropriate cover block all completeincluding cleaning and making it free from oil, grease etc. complete-for all heights and depths and conforming to relevant IS code (Make: SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to IS code) | 50.00 | KG |
260 | 9018821 | BRICK MASONRY BELOW PLINTH: Providing and laying Brick work withbricks having compressive strength not less than specified and conforming to BIS std. of specified class and above, satisfying efflorescene,water absorbtionand dimension test as per IS code) infoundation and plinth in Cement mortar 1:5(1 cement: 5 Coarse sand) asper specifications in one or more brick thickness including soaking of bricks, providingopenings, recesses ,scaffolding,staging, curing, finishing the jointsflush below ground level and raking out joints etc. all complete, as perdirections of Engineer-in-charge. CL 50 (BIS Class 50, Compressive strength 50 kg/cm2) | 1.00 | M3 |
270 | 9018855 | CEMENT PLASTER Providing cement plaster finished including cleaning,hacking of base surfaces, scaffolding,curing,finishing etc. all complete for all heights as per specificationsand directions of Engineer-in-charge including grooves, bands, drip moulderwhere ever required as specified.Also including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U" type nails before plastering.M.sand is permitted based on meeting the acceptance criteria. (Payment will be made separately for chicken wire mesh). 12mm thick with 1:5 (1 cement: 5 parts of m sand) | 5.00 | M2 |
280 | 9019373 | Supply and Fixing CP Brass Tissue Paper Holder/Dispensor with a capacity of about 500 tissues, fixed into wall with CP Brass screws complete in all respects including cutting and making good the walls etc. | 1.00 | EA |
290 | 9019374 | supplying and fixing CP brass double coat hook complete at all leads and lifts as per drawings, specifications and instructions ofthe Engineer Incharge. | 1.00 | EA |
300 | 9019238 | Low glare Surface mount fixed downlight in die cast aluminium frame. Anodised aluminium reflector for high efficiency 9W Neutral White Downlight | 4.00 | NO |
310 | 9019265 | Batten type 1x18 Watt surface mount LED tube light with acrylic dissipator | 2.00 | NO |
320 | 9019154 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 MM PVC Pipe | 80.00 | RM |
330 | 9019103 | POINT WIRING :Supply & Laying primary Point Wiring from Switch Board to the lighting Fixture/Celing Fans Exhaust Fans/Call Bell lamps/ by means of 3 runs of 1.5 sq.mm. PVC FRLS 650 Volts/1100 Volts grade ISI approved & ISI marked. PVC Insulated Stranded copper Conductor through existing recessed/Surface Conduits in an approved manner. This Shall Include the supply & Installation of Single Pole 5-Amps Modular Switch of approved Make in modular recessed box complete with all labour and materials for distance between 3 to 6 Meters) (Supply of Modular Recessed Box not in scope) | 12.00 | NO | 0.00 | Schendier, Wipro, Havells, Anchor, Crabtree, CPL,MDS
340 | 9019122 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for
modular switches in recess etc as required.- GI BOX 2 MOD SWITCH | 2.00 | NO |
350 | 9019123 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for
modular switches in recess etc as required.- GI BOX 3 MOD SWITCH | 2.00 | NO |
360 | 9019126 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for
modular switches in recess etc as required.- GI BOX 8 MOD SWITCH | 1.00 | NO |
370 | 9019206 | Supply and Installation of following types / sizes of single phase; 240 V AC, 50 hz fans of approved makes as per directions of Engineer-in-Charge; 230 V, single phase, 1500rpm, heavy duty, axial flow industrial exhaust fans with FRP louveres. IN EXHAUST FAN 300MM | 2.00 | NO | 0.00 | Usha, Crompton,Khetan, Orient,Havells
380 | 9019199 | Supply & Fixing of 3 star rating Sweep 3, Blade ceiling fan of approved make with Modular electronic regulator as per the directions of Engineer-in-Charge. CEILING FAN 48" | 3.00 | NO | 0.00 | Usha, Crompton,Khetan, Orient,Havells
390 | 9018953 | Preparing surface and painting of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins etc. incl. providing scaffolding,pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The finished surface shall be even and uniform.The application of paint shall conform to Manufacturer's recommendation and as per the directions of Enginner-in-Charge. 2 coats of Plastic Emulsion Paint conforming to IS 5411 (BLD PNT EMULSION). | 80.00 | M2 | 0.00 | Berger, Paint, Asian, Nerolac, Delux,Shalimar
400 | 9003041 | Supply,Carpenry & Fixing of FRAME WOOD SAL and allied wood work in frames of doors, windows, ventilators and other frames | 0.20 | M3 |
410 | 9019060 | Providing and fixing Factory made, overall 35mm thick block board flush shutter consisting of solid core block board bonded with phenol phormaldehyde synthetic resin conforming to IS : 848 and faced on both faces with commercial type plywood/teakwood veneering/ lamination bonded with phenol formaldehyde synthetic resin conforming to IS : 848, ncluding providing and fixing `T' type second class teakwood perimeter beading fixed by means of approved quality neoprene based adhesive and nailing @ 300 mm max.. painting exposed surface with two coats of approved shade and make synthetic enamel paint over approved quality primer coat, providing and fixing 125mm long M.S. butt hinges [for each shutter (vertical spacing not exceeding 600mm)] including fixing with door frame, finishing etc. all conforming to IS : 2202. Door shutter faced with approved quality 1mm thick teakwood veneering conforming to IS : 303, BS : 476,Part-7. | 5.50 | M2 | 0.00 | Century, Anchor,Natioanl,Green Ply,Kit Ply, Doner
420 | 9019009 | Providing and fixing ISI marked Anodized (Anodic coating not less than grade AC 10 as per IS 1868) AL. tower bolt with necessary screws etc. complete.
250 mm x 12 mm (bolt size) | 6.00 | EA |
430 | 9019010 | Providing and fixing ISI marked Anodized (Anodic coating not less than grade AC 10 as per IS 1868) tower bolt with necessary screws etc. complete.
150 mm x 10 mm (bolt size) | 3.00 | EA |
440 | 9019011 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete AL HANDLE 150MM | 3.00 | EA |
450 | 9019012 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete AL HANDLE 100MM | 2.00 | EA |
460 | 9019016 | Providing and fixing bright finished brass handles with screws etc. complete BRASS HANDLE 100MM | 1.00 | EA |
470 | 9019028 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete HINGE STEEL BUTT 125x64x1.90 mm | 12.00 | EA |
480 | 9019067 | ALDROP - Providing and Fixing 16mm dia x 300mm long brass chromium plated Aldrop for the doors with necessary fixture etc. complete. | 3.00 | EA |
490 | 9019064 | Supplying & fixing toughened glass of approved make of following thicknessin windows, doors, ventilators, partitions
etc. with necessary clips, beadings, EPDM rubber/ neoprene gasket etc. complete as per the directions of Engineer-in-Charge. Only the clear opening of glass shall be measured for payment. (Make: Modi, SaintGobain or equivalent) TOUGHENED GLASS 8MM | 3.50 | M2 | 0.00 | Modi Float / Sant Govino
ADD GST @ 18% |
NET AMOUNT INCL. GST |
Length | Width | Description | L | B | H | Qty
Wash Basin | 2 | Floor Area | 5.5 | 2.5 | 1 |
Urinal | 2 | Ceiling | 5.5 | 2.5 | 1 |
Ceiling LED Light | 6 | wall-1 | 5.5 | 2.5 | 2 |
Tube Light | wall-2 | 2.5 | 2.5 | 2 |
Door Size | Partition | 1.5 | 2.5 | 2 |
Window | 1 | Bathroom wall | 1.6 | 2.5 | 2 |
Main Gate | 1 | 2 | 1 |
Bathroom Gate | 0.7 | 2 | 1 |
Exhaust Fan | 2 | Wash Basin W | 1.85 | 0.6 | 1 |
Wall Tile | 22 | 1.5 | 1 |
Floor Tile | 5.5 | 2.5 | 1 |
Floor Sketting | 22 | 0.15 | 1 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
14324.zip
zip • 0.35 MB
BUDGETDOC_14324.xlsx
xlsx • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .