NAGAR ABHIVRUDDHI

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suiatble for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia 7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M 24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp. Makes: BAJAJ / VALMONT /TRANSRAIL / SKIPPER / UTKARSH /LAASMA

Supply and transportation of 120W LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover,IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 10KV inbuilt and more than 4KV external, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / VIN / Wipro / Jaquar / Keselec / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) of makes Polycab / KEI / RPG / Finolex / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab

Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make -------------------------------------------- as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following. 40A-63A, 4 Pole MCB as incomer, 6 Nos 6-32A SP MCBs

Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete.

Supply and fixing 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 IS mark with GI fittings including the cost of pipe & its fittings &labour chargescomplete

Supplying and erecting of 50Sq.mm 3 ½ core PVC armoured U.G cable 1100V grade with ISI mark following strand/solid aluminium conductor by making trench in soil up to 0.9m deep embedding the cable complete with sand bed of 20cm, thick layers and bricks placed on top of the cable width wise all over the run and backfilling the excavated earth without stones and hard materials and making the surface proper, 8 SWG GI wire including glands, lugs, including crimping job, to be laid partly in trench, partly in ground with cable indicators at 8 Meter interval etc, complete as directed by site In-Charge for service connections etc., complete. (Asian / Universal / Paragon/ Finolex / Polycab / Powerflex) from feeder pillars to Meter box. and as per the directions of the Engineer.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40 mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply of 1.5 Sqmm 3 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune

BLD-CSTN-2-1 (9): Earth work excavation in Ordinary Soil by Manual Means- for structures in all types of soil as per drawing and technical specifications and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308).

BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level: Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed.

RBR-CCPV-13 - ii: Providing and Laying of Interlocking Concrete Block Pavements using precast concrete blocks for paving of M-30 grade and thickness not less than 50 mm for Non traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's Specification including cost and conveyance of all material and all labour charges etc,. complete.

RBR-TSRA-29 : Cast in Situ Cement Concrete M20 Kerb: Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH

BLD-CSTN-12-12-(193): Painting with Synthetic Enamel paints - Two Coats - For New Iron Work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).

BLD-CSTN-2-1 (9) : Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work,excluding dewatering charges etc as per SS - 20 B (APSS 308).

BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level: Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.for foundation and under flooring bed.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer incharge etc, complete.

BLD-CSTN-2-8 (16) : Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Sea-Saw SE.02 5X3X8

MGR Fiber SE.01 5X5X5

Double Slide SE.06 4X10X6

Double swing SE.03 10X4X08

(Double swing) CAPACITY : Two Seats

Rainbow ladder SE .05 12X2X5

RBR-HRTC-5 ; Turfing lawns with fine grassing including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying doobs grass roots at 10 cm apart, including supplying and spreading of farm yard manure at rate of 0.6 cum per 100 sqm - as per Specification 307 MORTH

RBR-HRTC-4 : Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering etc -as per Specification 307 MORTH

RBR-HRTC-3 : Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm- as per Specification 307 MORTH

BLD-CSTN-2-8 (16) : Filling with red earth with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Planting palms including digging of pits 60cm. Cubes, loosening of 15cm. Bottom red soil, filling with soil with 10 kg Compost + 100 DAP per pit staking gap filling with in two month after planting.including cost of plant

Supplying and fixing of MS Gate using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.00mm MS sheet at bottom 0.30m height and 12mm MS square bars Vertically at 125mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and painting gate with one coat of red oxide primer including cost and conveyance of all materials,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.