REPAIRS TO CERTAIN WOODEN FURNITURES INCLUDING POLISHING AT BABINA CANTT

Amount

Table writing (FD 33,249,275) :Top : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table writing (FD 33,249,275) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD 33,249,275) : Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD 33,249,275) : Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD 33,249,275) : Stiffener :M & L Stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD 33,249,275) :Bottom rail : M & L bottom rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD 33,249,275) : Shutters complete with knob and lock :M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

Table writing (FD 33,249,275) :Sides of cup board : M&L for removing of unserviceable sides and supply & fix new side one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century & All as directed by Engr-in-charge

Table writing (FD 33,249,275) : Bottom of cup board : M&L for removing of unserviceable bottom and supply & fix new bottom one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century & All as directed by Engr-in-charge

Table writing (FD 33,249,275) :Back of cup board :M & L for back of cupboard made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg.

Table writing (FD 33,249,275) : Partition of the cup board : M&L for removing of unserviceable partition of cup board and supply & fix new partition of cub board one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table writing (FD 33,249,275) : Drawer :M&L for removing of unserviceable drawer and supply & fix new drawer one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-charge.

Table writing (FD 33,249,275) : Fitting : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table writing (FD 33,249,275) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table writing by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table centre : FD-29/235/274/384) : Top:M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table centre : FD-29/235/274/384) : Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table centre : FD-29/235/274/384) : Long rail :M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table centre : FD-29/235/274/384) : Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table centre : FD-29/235/274/384) : Fitting : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table centre : FD-29/235/274/384) :Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of Table centre by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table 3’ X 3’ ( 900 x 900 x 760 mm) (FD – 88,291 ) : Top : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table 3’ X 3’ ( 900 x 900 x 760 mm) (FD – 88,291 ) : Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 3’ ( 900 x 900 x 760 mm) (FD – 88,291 ) :Top rail : M & L Top rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 3’ ( 900 x 900 x 760 mm) (FD – 88,291 ) : Wooden cleat : Wooden cleat made out out well seasoned teak wood free from cracks and knots and sap wood at each corner of the table of required size shall be fixed with 50mm long screw wood steel ISI marked all as directed by Engr-in-charge.

Table 3’ X 3’ ( 900 x 900 x 760 mm) (FD – 88,291 ) : Fitting : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel.

Table 3’ X 3’ ( 900 x 900 x 760 mm) (FD – 88,291 ) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table 3'x3' by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Teapoy (FD 232/382/34(M)/278) : Top : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Teapoy (FD 232/382/34(M)/278) : Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Teapoy (FD 232/382/34(M)/278) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Teapoy (FD 232/382/34(M)/278) :Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Teapoy (FD 232/382/34(M)/278) : Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Teapoy (FD 232/382/34(M)/278) : Fitting : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Teapoy (FD 232/382/34(M)/278) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of Teapoy by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Peg Table (FD-25(M) /277/236/266/384) : Top : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Peg Table (FD-25(M) /277/236/266/384) : Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Peg Table (FD-25(M) /277/236/266/384) :Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Peg Table (FD-25(M) /277/236/266/384) : Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Peg Table (FD-25(M) /277/236/266/384) : Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Peg Table (FD-25(M) /277/236/266/384) : Fitting : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Peg Table (FD-25(M) /277/236/266/384) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of Peg Table by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table dining 6/8 pers (FD -30,273,376) : Top for table dining 6 pers : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table dining 6/8 pers (FD -30,273,376) : Top for table dining 8 pers : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table dining 6/8 pers (FD -30,273,376) : Long rail of table dining 6 pers : M & L long rail of Table dining 6 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table dining 6/8 pers (FD -30,273,376) :Long rail of table dining 8 pers : M & L long rail of Table dining 8 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table dining 6/8 pers (FD -30,273,376) : Short rail for 6/8 pers : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table dining 6/8 pers (FD -30,273,376) :Leg :M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table dining 6/8 pers (FD -30,273,376) : Wooden cleat : M & L for wooden cleat made out of well seasoned teak wood free from cracks and knots and sap wood at each corner of the table of required size shall be fixed with 50mm long screw wood steel ISI marked all as directed by Engr-in-charge.

Table dining 6/8 pers (FD -30,273,376) : Fitting : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table dining 6/8 pers (FD -30,273,376) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table dining 6/8 pers by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) : Top: M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) : Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) :Back : M & L Plywood commercial 6mm thick BWR grade ISI mark duly covered with 0.80mm thick plastic laminated sheet in natural teak shade(inner side) shall be provided to the back of table bed side as shown on drg and as directed by Engr-in-charge.

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) : Side : M&L for removing of unserviceable side and supply & fix new side one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) : Shelf :M&L for removing of unserviceable shelf and supply & fix new shelf one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) : Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE BED SIDE FD/DB(FD-28(M)/276/248/210) : Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table bed side by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

TABLE DRESSING GENTS (FD-31,230,379) :Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-charge.

TABLE DRESSING GENTS (FD-31,230,379) :S & F in repairs new mirror 5mm thick of approved make with full frame all as specified on drawing or as directed by Engineer-in-charge.

TABLE DRESSING GENTS (FD-31,230,379) : TOP :M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Irrespective of what is shown on drg and as directed by Engr-in-charge.

TABLE DRESSING GENTS (FD-31,230,379) : Bottom :M&L for removing of unserviceable bottom and supply & fix new bottom one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-charge.

TABLE DRESSING GENTS (FD-31,230,379) : sides :M&L for removing of unserviceable sides and supply & fix new sides one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-charge.

TABLE DRESSING GENTS (FD-31,230,379) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table dressing gents by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Hat stand with mirror ( FD 23, 361) :Looking mirror : M&L Looking mirror size 440 x 300 x 5 mm of approved quality duly fixed with beading size 35x6mm made out of well seasoned duly finished as shown on drg .

Hat stand with mirror ( FD 23, 361) :Brass peg : M&L Brass peg 100mm long as per sample shall be fixed with brass screws 25mm long as shown on drg.

Hat stand with mirror ( FD 23, 361) : Rawl plug : M &L rawl plug as per drg and approved sample shall be fixed to the back of the hat stand as shown on the drg.

Hat stand with mirror ( FD 23, 361) : Beading : M & L for Beading made out of well seasoned teak wood size 35x6mm allaround shall be provided to the frame of hat stand as shown on drg.

Hat stand with mirror ( FD 23, 361) : Plywood : M & L for Plywood one side teak face 4mm thick confirming to IS duly approved shall be provided wherever required to be fixed with head less nails all as shown on drg and as directed by Engr-in-charge.

Hat stand with mirror ( FD 23, 361) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of Hat stand with mirror by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

TABLE OFFICE CLERK (DB-4121/292) : Top: M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE OFFICE CLERK (DB-4121/292) :Drawer :M&L for removing of unserviceable drawer and supply & fix new drawer one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-charge.

TABLE OFFICE CLERK (DB-4121/292) : Leg : M & L Leg l made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE CLERK (DB-4121/292) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE CLERK (DB-4121/292) : Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE CLERK (DB-4121/292) :Long Stiffener : M & L long stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE CLERK (DB-4121/292) :Short Stiffener : M & L short stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE CLERK (DB-4121/292) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table office clerk by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

TABLE OFFICE OFFICER (WDF-32/FD-139) : Top:M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE OFFICE OFFICER (WDF-32/FD-139) : Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-charge.

TABLE OFFICE OFFICER (WDF-32/FD-139) : Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE OFFICER (WDF-32/FD-139) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE OFFICER (WDF-32/FD-139) : Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE OFFICE OFFICER (WDF-32/FD-139) :Shutter complete with knob and lock :M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

TABLE OFFICE OFFICER (WDF-32/FD-139) :Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table office officer by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

TABLE DRESSING LADIES (FD-32,251,265,378) : TOP : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE DRESSING LADIES (FD-32,251,265,378) :Glass shutter : S&F in repairs new Glass shutters including Aluminium channel of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit)

TABLE DRESSING LADIES (FD-32,251,265,378) :Back : M & L Plywood commercial 6mm thick BWR grade ISI mark shall be provided to the back of table bed side as shown on drg and as directed by Engr-in-charge.

TABLE DRESSING LADIES (FD-32,251,265,378) : S&F in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

TABLE DRESSING LADIES (FD-32,251,265,378) : Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dressing ladies by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Trestle SR wooden (FD-86/141) : Top batten size 2440x100x100mm : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-charge .

Trestle SR wooden (FD-86/141) : Top batten Size 600x60x100mm : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-charge .

Trestle SR wooden (FD-86/141) :Top batten Size 2040x60x100mm : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-charge .

Trestle SR wooden (FD-86/141) : Legs : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-charge .

Trestle SR wooden (FD-86/141) : Finish : M & L treating the surfaces of trestle store room wooden shall be treated with two coats of creosote oil after preparartion of surface and as directed by Engr-in-charge.

Side Board (FD-26/241) : TOP : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century and as shown on drawings and as directed by Engr-in-charge.,

Side Board (FD-26/241) : Bottom :M&L for removing of unserviceable bottom and supply & fix new bottom one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century and as shown on drawings and as directed by Engr-in-charge.,

Side Board (FD-26/241) :Sides : M&L for removing of unserviceable sides and supply & fix new sides one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century and as shown on drawings and as directed by Engr-in-charge.,

Side Board (FD-26/241) : Door shutters with knob to be fixed with Piano type continuous hinges : M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

Side Board (FD-26/241) : Drawers with Knob : M&L for removing of unserviceable drawer and supply & fix new drawer one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-charge.

Side Board (FD-26/241):Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of side board by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

TABLE DRESSING LADIES with stool cushioned (FD/MAP-II/07) : S&F in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

TABLE DRESSING LADIES with stool cushioned (FD/MAP-II/07): Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dressing ladies by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Top: M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) :Bottom rail : M & L bottom rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) :Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Short stiffener : M & L short stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-charge.

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Fitting : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel .

Table 3’ X 2’ with / without drawer :(FD 41,42,231,224,234, 283 & 284) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table 3'x2' with/without drawer by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Chair wooden bottom :(FD 225, 285) :Seat : M & L Seat to be made of ply wood commercial 9mm thick, BWR grade ISI marked with 6mm dia perforation and to be fixed with 20mm long screw wood steel .

Chair wooden bottom :(FD 225, 285) : Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Front rail :M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Back rail :M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Side rail :M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Back Rest :M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair wooden bottom :(FD 225, 285) : Fitting : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel .

Chair wooden bottom :(FD 225, 285) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair wooden bottom by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Chair Easy (FD-17,229,201) :Front Leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) : Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) : Front rail :M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) :Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) : Side rail :M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) :Arm Rest : M & L arm rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) :Back frame rail for back : M & L back frame rail for back made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) :Fillets for caning seat and back : M & L fillets for caning seat & back made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair Easy (FD-17,229,201) :Fitting : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair Easy (FD-17,229,201) : Caning : Removing of unserviceable/ worn out plastic cane from Chair Easy and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-In - charge

Chair Easy (FD-17,229,201) :Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair Easy by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Chair dining (FD-16/203/ 279/228) :Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) :Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) :Front rail :M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) : Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) :Side rail :M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) :Back Rest :M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) :Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) :Fitting : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair dining (FD-16/203/ 279/228) : Caning : Removing of unserviceable/ worn out plastic cane from Chair dining and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-In - charge

Chair dining (FD-16/203/ 279/228) :Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair dining by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

Chair writing (FD-20/202/250/280) : Front Leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) : Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) : Front rail :M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) : Side/back rail : M & L side/back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) :Back Rest :M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) : Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) : Arm Rest : M & L arm rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair writing (FD-20/202/250/280) : Fitting : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair writing (FD-20/202/250/280) : Caning : Removing of unserviceable/ worn out plastic cane from Chair writing and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-In - charge

Chair writing (FD-20/202/250/280) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair writing by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Stool dressing (FD-27/252/282) : Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Stool dressing (FD-27/252/282) : Front Rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Stool dressing (FD-27/252/282) : Side Rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Stool dressing (FD-27/252/282) : Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Stool dressing (FD-27/252/282) : Fitting : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Stool dressing (FD-27/252/282) : Caning : Removing of unserviceable/ worn out plastic cane from stool dressing and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-In - charge

Stool dressing (FD-27/252/282) :Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of stool dressing by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Front rail :M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05): Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Side rail :M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Back Rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Fitting : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Seat : Removing of unserviceable/ worn out plastic seat from Chair dining and material and labour for repacement of new seat plasic of size 405x390mm & preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary as directed by Engr-In - charge

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair dining by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

Chair dining Officers (FD/E6/MAP-II/04) :Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04) :Rear leg : M & L rear leg rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04) :Front rail :M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04): Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04) :Side rail :M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04) :Back Rest :M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04) :Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining Officers (FD/E6/MAP-II/04) :Fitting : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel .

Chair dining Officers (FD/E6/MAP-II/04) :Seat : Removing of unserviceable/ worn out seat from Chair dining and material and labour for repacement of seat Plywood with foam and tapesrty cloth and supply and fixing new foam 75 mm thick 32 HD covered with best quality tapestry cloth (not less than 350/- RM) including bottom plywood 9 mm thick commercial BWR Gde and to be fixed with screws to the chair as directed by Engr-In-Charge,size of seat 460mmx 375mm .Shape and size all as existing or as per directed by Engr-in-Charge. & preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary as directed by Engr-In - charge

Chair dining Officers (FD/E6/MAP-II/04) :Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair dining by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16)) : Looking Mirror with frame to be fixed with Piano type continuous hinges : M & L Looking mirror Size 1080mm x 530mm x 5mm thick of approved make with full frame and duly fixed with piano type hinges with beading size 35x6mm made out of well seasoned duly finished as shown on drg & all as specified on drawing or as directed by Engineer-in-charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16) : Bottom :M&L for removing of unserviceable bottom and supply & fix new bottom one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century & All as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16) : sides :M&L for removing of unserviceable sides and supply & fix new sides one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century & all as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16)) : Glass shelf : S & F in repairs new glass shelf of 5mm thick of size 496mmx95mmx5mm thick of approved make and to be fixed in inner side of dressing mirror gents all as specified on drawing or as directed by Engineer-in-charge.

TABLE 5'x2'-10" (FD-139(M)) : Top:M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick confirming to IS in Baverian beach shade Make : Greenpanelmax MDF /Century.Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.,

TABLE 5'x2'-10" (FD-139(M)) : Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE 5'x2'-10" (FD-139(M)) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE 5'x2'-10" (FD-139(M)) : Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

TABLE 5'x2'-10" (FD-139(M)) : Wooden cleat : M & L for wooden cleat made out of well seasoned teak wood free from cracks and knots and sap wood at each corner of the table of required size shall be fixed with 50mm long screw wood steel ISI marked all as directed by Engr-in-charge.

TABLE 5'x2'-10" (FD-139(M)) :Fitting : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel .

TABLE 5'x2'-10" (FD-139(M)) : Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of table 5'x2'-10" by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

PAWAN CONSTRUCTION CO

HINDUSTAN ENGINEERING WORKS