Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
15 Oct 2026, 3:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CPO-EAST ZONE
THIS TENDER IS BEING FLOATED FOR CASING EXTENSION WORK AT MDPL ASPL PVPL BPPL
2600027922-HD-07600
5100027922
Open Tender
Two Bid
Unknown (Unspecified Location)
₹0
Exempted
15 Oct 2026
17 Sept 2026
15 Oct 2026
15 Oct 2026
18 Sept 2026 - 4 Oct 2026
29 Sept 2026
| Item No | Item Title | Description | Qty | Unit |
|---|---|---|---|---|
| 1 | Suply of polyethylene Insulator | Suply of polyethylene Insulator — Supply of injection moulded high-density polyethylene Insulator, suitable for the pipeline of diam:18 inch and casing: 24-inch, one set of insulator includes all the components of insulator to make one complete ring of insulator over the circumference of carrier pipe, make: raychem / middle east or equivalent as approved by eic, dielectric strength: min 450 to 500 volt/mil, minimum compressive strength: 3200 psi, minimum tensile strength: 3100 to 5000 psi | - | Each |
| 2 | Supply of MS flat/strip 25mm X | Supply of MS flat/strip 25mm X — Supply of MS flat/strip 25mm X 5mm: spot welding inside portion of casing pipe for protection during welding of casing pipe in longitudinal and circumferential direction by inserting plate inside for protection | - | meter |
| 3 | Cutting and shifting of Vent & | Cutting and shifting of Vent & — Cutting and shifting of Vent/drain pipe: Cutting of 24” ERW casing pipe in circumference and welding the same at the end of newly welded casing pipe | - | Each |
| 4 | Supply of PIPE,MS,ERW,600MM 1027-MUNDRA D&P STATION | Supply of PIPE,MS,ERW,600MM 1027-MUNDRA D&P STATION — Supply of PIPE,MS,ERW,600MM: material: mild steel; manufacturing process: electric resistance weld; size (NB):600 mm; wall thickness:7.9 mm; casing pipe, confirming to IS 3589 | - | meter |
| 5 | SPLY AND INSTLN OF ZINC | SPLY AND INSTLN OF ZINC — SPLY AND INSTLN OF ZINC ANODE: Zinc anode supply and installation with anode tail cable, it also includes connecting the cable with pipeline/casing pipe | - | Each |
| 6 | INSTLN OF CASING PIPE | INSTLN OF CASING PIPE — INSTLN OF CASING PIPE: This item shall include cost of all the planned and incidental expenses towards executing the casing pipe extension. This shall include the trenching, excavation, cutting of the supplied casing pipes, placing of the casing pipes, welding of the casing pipes, fixing of the insulator, fixing of end seals, holiday detection on coating, bevelling, welding, installation/shifting of the warning marker, Obtaining the restoration certificate from the engineer-in-charge. | - | meter |
| 7 | Shifting of TLP | Shifting of TLP — Shifting of TLP: This item shall include the dismantling of TLP with cables, erection of TLP at designated place as advised by EIC, connecting cables via pin brazing to the pipeline (upto 6 cables) etc. Scope also includes cable laying back to the pervious condition without aby damage to TLP box or cables. | - | Each |
| 8 | Supply & Installation of End | Supply & Installation of End — Suply & Inst of End Seal: This item shall be made of heat shrink high density radiation cross linked polyethylene. Flexible to cater for the expansion and contraction of carrier and casing pipe and shall be able to tolerate both angular & concentric misalignment of casing without loss of sealing efficiency with minimum 2200 psi tensile strength & minimum 400% ultimate elongation (ASTM D 638) having peel strength of 5 PLI (ASTM D 1000). | - | Each |
| 9 | Suply of polyethylene Insulator | Suply of polyethylene Insulator — Supply of injection moulded high-density polyethylene Insulator, suitable for the pipeline of diam:18 inch and casing: 24-inch, one set of insulator includes all the components of insulator to make one complete ring of insulator over the circumference of carrier pipe, make: raychem / middle east or equivalent as approved by eic, dielectric strength: min 450 to 500 volt/mil, minimum compressive strength: 3200 psi, minimum tensile strength: 3100 to 5000 psi | - | Each |
| 10 | Supply of MS flat/strip 25mm X | Supply of MS flat/strip 25mm X — Supply of MS flat/strip 25mm X 5mm: spot welding inside portion of casing pipe for protection during welding of casing pipe in longitudinal and circumferential direction by inserting plate inside for protection | - | meter |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2600027922-HD-07600.pdf
TENDER_DOCUMENT • 13.84 MB
2600027922-HD-07600_2.pdf
ADDENDUM_DOCUMENT • 13.98 MB
2600027922-HD-07600_1.pdf
ADDENDUM_DOCUMENT • 13.99 MB
2600027922-HD-07600_2.pdf
ADDENDUM_DOCUMENT • 13.98 MB
2600027922-HD-07600_1.pdf
ADDENDUM_DOCUMENT • 13.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .