PROVN OF REST ROOMS FOR GUARDS AT ASTE UNDER GE

Demolition of cement concrete of any description & in any position etc complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all specified and directed.

Demolition of stone/Brick masonry built-in cement mortar incl all quions arches, pillars etc

Dismantling wrought iron or mild steel work of any description not othervise provided for.

Dismantling plain or corrugated steel sheeting any guage / thickness incl nainital pattern or similar pattern roof covering.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directedall as directed by Engr-in-charge.

Removing building materials etc.to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m n exc 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. exc 10 sq m on plan and getting out hard / dense soil complete all as specified and directed.

M&L for PCC 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffit (if any) of foundation and plinth beams, and similar work vertical or batter for rough finished surface all as specified and directed.

M&L for RCC (design mix), M 30 (20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete concrete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions concrete all as specified and directed.

M &L for RCC ,M 25 (design mix) with 20 mm graded stone aggregates as in Columns, pillars, piers, posts and struts concrete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Rough finished surfaces of concrete, complete all as specified and directed.

M &L for RCC ,M 25 (design mix) with 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for Pre-cast cement concrete laid in cement mortar (1:4) type C1, mix 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

M&L for moorum/red bajri filling in floors or paving, laid in layers n.exc15 cm thick, spred, levelled and rammed including watering all as directed.

M & L for broken stone or boulders hard core of gauge n exc 63mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to true surface

M&L for 75 mm thick PCC 1:4:8 (40 mm graded stone aggregate) type D2 as in sub- base of floor all as specified and directed.

M&L for 30 mm thick Cement concrete type B 0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in flooring/hardstanding and complete all as specified.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M & L for RCC ,M 25 (design mix) with 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M & L for RCC M 25 (design mix) with 20 mm graded stone aggregates as in Chajja complete all as specified and directed.

M&L TMT mild steel bar 5mm dia and over upto and including 10mm dia in strirrups spaces and binders all as specified.

M&L TMT mild steel bar 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L TMT mild steel bar but 6mm to 8mm dia. cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Rendering 5 mm thick in ceilings on fair faces of brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement concrete all as specified and directed.

M&L Rendering 10 mm thick on fair faces in CM 1:6 of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L Rendering 15mm thick cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 (40 mm graded stone aggregate) type D2 as in sub- base of floor all as specified and directed.

M&L of Screed bed of CM 1:6 or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:4 etc complete

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:4 etc complete

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surfaces set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 etc complete

Material and Labour for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area exceeding 2.00 sqm each

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15 mm rendering as in backing coat in CM 1:4 complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls all as specified.

S&F PVC (SWR) bends of 110 m radius all as specified.

S&F Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified.

S&F PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pip or lever if any size and pattern with inlet ball valve float and handle fixed to pedestal pattern water closet pan including all joints , etc complete of approved makecomplete all as specified.

S& F Vitreous china urinals, half stall type, incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass srews, pointing around urinal back in cement; flush pipe , grating and union for discharge pipe, complete all as specified and directed.

Supply and fix vitreous China wash basin, white, flat back, size 630 x 450mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.

S&F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.

S&F 15mm bore Pillar taps, fancy type cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F stop valves 15mm ,fancy type cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron piipe or unions and fixed complete all as specified and directed.

S&F 15 mm dia bore fancy type chromium plated bib taps screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F Grating square 150mm dia of PTMT(Minimum weight 100 gms) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved qualitycomplete all as specified and directed.

S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet complete all as specified and directed.

S&F soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed.

S&F 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed.

S & F PVC waste pipe, 32 mm dia for WHB or sink, complete all as specified and directed.

S & F PVC waste pipe for urinal, complete all as specified and directed.

Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.

S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipescomplete all as specified and as directed.

S&F 110 mm bore of pipe PVC (SWR) P trap of any radius / shoe fixed to PVC pipes complete all as specified and as directed.

S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) junction single T of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted and fixed in position including all type of fitting and pipe all as per specified and directed.

S&F 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge

S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and fixing 600 x 600 x 16 mm mineral fibre ceiling tiles of Classic lite RH99 complete all as specified and as directed.

S&F Fe 410-W (Gde-E- 250) quality- A Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. Including cleats, brackets, etc. Complete all as specified and as directed.

M&L for painting new steel surfaces of any description incl preparation, priming with red oxide zinc and two coats of synthetic enamel paint, width or girth over 10cm not otherwise described, complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in as in padding of roof for making slope, coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.

M&L screed bed in CM (1:3) 20 mm thick on concrete surface as in required slope for draning out the rain water all as directed.Note : WPC will paid separately.

Material and labour for roof treatment as follows:- (a) Applying one coat of SBR latex based bond coat using Latex Plus after mixing with water and cement in ratio of 1:4:7 to improve the bonding between residual and PU coat. Allow to dry bond coat for 4-6 hours before applying PU coat and surface to be cleaned before applying PU coat .(b) Applying two coats of single component, cold applied, water based polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the roof with HS PU Roofkoat at 0.6 kg/per Sqm for each coat without dilution confirming to ASTM D 6083-97a (Standard Specification for Liquid Applied Acrylic Coating Used In Roofing)Each coat should allow to dry 4-6 hours and sandwiching 40gsm Geo-textile between two coats. Spread 40gsm Geo textile over 1st coat when coat is wet condition The component shall have a density of 1.25 to 1.3kg/per Litre, having tensile strentgh of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 2 coats . SRI value should be more than 100. the quoted rate shall include surface prepartion,repair the crack in mother slab by chasing with cutting machine and fill the same with polymerized mortar in CM 1:4 admixed with latex agent of reputed manufacture, making coving at Junction, bore packing, treatment of construction joints completely as per manufacurer's specification and direction of the Engineer In Charge.Make: Berger / ASIAN / STP / SIKA or Equivalent.NOTE:- The above treatment shall be got carried out by the authorised applicator of the manufacturer approved by the GE.

Excavating in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n.exc 1.5 m in depth and getting out as I soft/ loose soil complete all as specified and directed

Removing excavted material n exc 50 m and depositing where directed at level n exc 1.5 m above the staring point as soil complete all as specified and directed.

Sand cushioning (dry sand) to under ground cable for cable protection in layers of 23cm thick ( 8 cm thick before laying of cable and 15cm thick after laying of cable) in trenches complete all as specified & directed. Note:- Only punned layers shall be measured.

Supply and laying unreinforced pre cast concrete cable cover class LV type 1 flat size 250 x 150 x 40 mm for cable protection complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dence soil complete all as specified and directed.

M&L 50 mm thick sand filling under floor or in foundation including watering & consolidation complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

Providing, cement concrete type B0, mix 1:2:4 (12.5mm graded stone aggregates) in roof kerbs or mud stops, rounded chamfered on edges complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregates in foundation and mass concrete.

M & L Cement concrete mix 1:2:4 type B-1 (using 20 mm graded stone aggregates as in coping etc including weathering, slightly rounded or chamfered angles and throating as direcet including necessary formwork all as specified & as directed.

Material & Labour for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in surface channels/benching of manhole, drain, laid to shape and slope and surfaces finished even and smooth using extra cement, complete etc all as specified and directed.

M&L for Liquid water proofing compound complete all as specified and directed.

Providing, precast cement concrete type B1, mix 1:2:4 (20 mm graged stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified

M&L 150mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia.

Cutting in to existing manhaoles for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or ¾section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required as specified dia of pipe 150mm.

Rendering 15 mm thick on fair faces in CM 1:6 of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 etc complete

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of cement based paint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes to accomodate modular switches & plates including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:- (a) One light point /Fan point /controlled by one switch.

(b) One 5 Amps socket point on same board with other switches

(c) One 5 Amps socket point on independent board.

(d) All as per item No.01 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .

(e) All as per item No.01 above but wiring complete with 4.0 Sqmm for 3 pin 15/30 A socket multipurpose on independent board .

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed

S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed.

S&F modular White cover plate with frame 6 module complete all as specified & directed

S&F modular metal flush box 6 module complete all as specified and directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed

S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed.

Supply & fixing of ceiling rose surface three terminals complete all as specified & directed.

S&F single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos double pole MCB 20Amps capacity complete all as specified and directed by Engr-in-charge

S&F LED PC batten light fitting of 4 feet 20 watt, with energy efficient LED and integrated electronic driver of 20W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed .

S&F LED PC batten light fitting of 2 feet 10 watt, with energy efficient LED and integrated electronic driver of 10W fitting including connecting up with three core flexible copper conductor upto ceiling rose complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 250 mm sweep complete all as specified and directed.

S&F Celing Fan complete with blades ,antisuicide down rods ,elcetronic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed.

M & L for sub main wiring complete with four runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with two run of PVC insulated copper conductor 6Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. NOTE: Four runs of cable , one run of conduit & one run of earth conductor shall be measured as one unit length.

M & L for sub main wiring complete with two runs of 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. NOTE: Two runs of cable , one run of conduit & one run of earth conductor shall be measured as one unit length.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

S & F MCB DB TPN 4Way, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing complete all as specified and directed.

S & F MCB TP 40/63 Amps incl making connections all as specified and directed.

Supply and fixing of Endura Citylite Platinum, 45 W LED Street Light fittingpressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection including bracket,nut bolt ,clamp complete all as specified and directed.

M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.

Material & labour for fixing of Earth continuity conductor GI strip of size 25X 4 mm with nut bolts at joints , fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles,equipments or any other indicated situation for loop earthing etc, strip fixed on with epoxy insulatorof suitable size all as specified and directed by Engineer-in-Charge.

Supply and install hi wall split units indoor/outdoor complete withcordless remote control unit and within built air ioniser and Plasma filterfor better indoor air quality withminimum 3 star rating and EER 3.2of capacity 1.5 TR complete all as specified and as directed

Supply ,fixing Revolving Search light with XHA Xenon lamp 2000w 120-220volts 50Hz light output (lumens) 5600k angle of huntng -pan 120 degree Range 2000-5000mtrs with connected items all as specified and as directed

S & F Pipes galvanised medium class supplied and laid in trenches / walls / floors complete with all fittings such as tees / Lbows/ Bends/ Unions/ Reducers/ Sockets/ etc of following sizes all as specified and directed:- (a) Size 50 mm dia bore

(b) Size 25 mm dia bore

Supply and lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables ( heavy duty) 1100 volts grade with standered aluminium conductor of following sizes. (a). Size 16 sq mm 4 core. NOTE : Excavation & Earthwork, Sand cushioning & cable protwction shall be measured & paid seperately