SPECIAL REPAIR TO SNCO S LIVING IN ACCOMMODATION P 8 BLOCK NO 2 AT ATS BELAGAVI

Amount

B/R WORKS :- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Material and labour for coloured Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm in floor with rectified edges (joint free) etc set and jointed in neat cement slurry over cement screed 15 mm thick in CM1:6 all as specified and directed.

Material and labour for Coloured glazed joint free ceramic tiles economy finish Gde B-II (b) quality of size 300 x 200 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing coat with cm (1:4). all as specified and directed.

Roughning surface of old concrete floor by picking , sweeping clean and washing down with water to remove dust,etc. to receive the floor finishes all as directed and specified.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed of 20 mm thick in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete etc all as specified and directed.

Machine cut kota stone slab flooring 15-18 mm thick over cement screed bed of 10 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete etc all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate for levelling / to receive screed for laying tiles all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc all as specified and directed.

Material and labourfor pre cast cement concrete block masonry type C1, 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified

Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding concrete in sunken portion mixed with liquid water proofing compound at the rate of 0.40% by weight of cement all as specified and as directed all as specified and directed.

Material and labour for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in lean concrete in sunken portion all as specified and as directed.

Material and labour 15 mm thick cement plaster on brick/concrete surfaces in CM 1:4 mixed with water proofing liquid at the rate of 0.40% by wt of cement in sunken portion finished even and smooth without using extra cement all as specified and as directed. Note :-WPC will be measured and paid seperately

Material and labour for preparation of floor and wall surfaces, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry and as directed.

Material and labour for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours and work has to be carried out as per direction of Engineer in Charge and as per Manufacturers Instruction.

Material and labour for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/ sqm mixed with acrylic based polymer 'ARMOURCRETE' of structural water proofing pvt ltd and silica sand by ratio 1:2:2 (Armour-crete : cement :silica sand) or 'POLYCRYL' of Green boro poly chem pvt ltd and silica sand by ratio 1:2:2 (Polycryl: cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions. This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and work has to be carried out as per direction of Engineer in Charge and as per Manufacturers Instruction.

Supply and fixing Vitreous China wash down water closet (Pedestal), white (EWC) and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete complete all as directed.

Supply and fixing in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as directed.

Supply and fixing in repairs Vitreous China wash down water closet (Pedestal), white (EWC) and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete complete all as directed.

Supply and fixing in repairs Vitreous china wash basin white flat back size 550X400mm including, waste coupling , pipe and cutting for and pinning in ends of brackets or erecting stand brackets all as specified and directed.

Supply and Fix in repair 15mm bib taps fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and Fix in repair 15mm pillar taps fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and Fix in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

Supply and Fix in repairs 15 mm swivel shower of PTMT any colour for fixing with pipe (minimum weight 40 gms) all as specified and directed.

Supply and Fix in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges all as specified and directed.

Supply and Fix PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

Demolition and breaking up drain pipes salt glazed stone ware/ AC / reinforced concrete, set in cement mortar of size 100 mm/ 75 mm complete all as specified and directed.

Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor all as specified and directed.

Supply and Fix (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent cement all as specified and directed

Supply and Fix 75 mm bore PVC (SWR) bends with access door all as specified and directed.

Supply and Fix 110 mm bore PVC (SWR) bends with access door all as specified and directed.

Supply and Fix PVC (SWR) vent cowl 110 mm dia all as specified and directed.

Supply and Fix in repairs CP soap dish and fixed all as specified and directed.

Taking down 15 mm bore steel tubing and connection etc.complete all as specified and directed.

Taking down 20 mm bore steel tubing and connection etc.complete all as specified and directed.

Taking down 25 mm bore steel tubing and connection etc.complete all as specified and directed.

Taking down 40 mm bore steel tubing and connection etc.complete all as specified and directed.

Supply and laying of CPVC pipes of 15 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceiling or laying in floors complete all as specified and directed .

Supply and laying of CPVC pipes of 20 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceiling or laying in floors complete all as specified and directed .

Supply and laying of CPVC pipes of 25 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceiling or laying in floors complete all as specified and directed .

Supply and laying of CPVC pipes of 40 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in wall / ceiling or laying in floors complete all as specified and directed . Note for item No.40 to 43 :- All pipes inside the buildings should be concealed and disturbed surfacesshould be made good by the contractor, and the rate quoted by the contractor is inclusive of all these facts.

Taking down of chowkats with shutters (without taking off shutters from the frames) n exc 1.5 sqm each all as specified and directed.

Taking down of chowkats with shutters (without taking off shutters from the frames) exc 1.5 sqm and n exc 4 sqm each all as specified and directed.

Supply and fixing IInd class hardwood plain solid straight chowkhat and frame wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints. all as specified and directed.

Supply and fixing factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification and drawing all as specified and directed.

Supply and Fix factory made solid pane PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face as per specification and drawing with particle board core.

Supply and Fix 35 mm thick second class hardwood rail & style plain framed pannelled factory made shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS1003 (part I) kiln seasoned and chemically pressure treated all as specified and directed.

Supply and Fix 2nd class hard wood glazed and skeleton shutters, 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

Supply and Fix 2nd class hard wood glazed and skeleton shutters, 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

Supply and fix in repairs steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

Supply and Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified.

Supply and Fix in repars stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified.

Supply and Fix 3 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

Supply and Fix 4 mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

Supply and Fix 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and Fix in repairs 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and Fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix in repairs 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix Butt hinges 100 mm long medium Weight cold rolled mild steel and fixed all as specified and directed.

Supply and Fix 150 mm long extruded aluminium alloy anodised handle cast type all as specified and directed.

Supply and Fix in repairs 150 mm long extruded aluminium anodised handle cast type all as specified and directed.

Supply and Fix 100 mm long extruded aluminium alloy anodised handle cast type all as specified and directed.

Supply and Fix in repairs 100 mm long extruded aluminium anodised handle cast type all as specified and directed.

Supply and Fix Butt hinges 75 mm long medium Weight cold rolled mild steel and fixed all as specified and directed.

Supply and Fix in repairs 140 mm floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Material and labour for preperation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Material and labour preperation of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint (ordinary tint) all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified.

Supply and Fix Harrison rails , mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified and as directed.

Supply and fix in repairs veneered particle board 18/19 mm thick, exterior grade, solid core, general purpose type, with face veneers of type 'BB' as in cup board shelves, fixed with screws to timber frame work all as specified and directed.

Taking down existing tar felt on roof surfaces carefully all as directed by Engr-in-Charge.

Disconnecting existing tanks exc 500 but not exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required, reconnecting & refixing in position including cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc,all as specified and directed.

Material and labour for cleaning existing roof surfaces and brushing with neat cement slurry @3Kg/Sqm smooth the surface complete all as specified and as directed.

Material and labour for rendering in cement mortar 1:3 of thickness 10 mm mixed with (conplast-X 42 11 C fosroc chemical (India) Ltd water proofing compound 100 ML per bag of cement as specified by manufacturer instruction on concrete surfaces of roof and making the surfaces finished fair and even as in required slope for draining out the rain water all as specified and directed. (Note - WPC (conplast-X 42 11 C fosroc chemical (India) Ltd) shall be measured and paid for separately).

Supply only liquid water proofing compound (conplast-X 42 11 C fosroc chemical (India) Ltd @ 100 ml per bag of cement ) all as specified and directed.

Material and labour for Preparing RCC roof slab by removing dust, dirt and applying oil bond bituminous primer @ 0.2Kg/Sqm and providing APP modified water proofing membrane weighting not less than 4 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10cm side over laps and 15cm end lap torch sealed and bonded as per detailed procedure on note No. 6 of TD AFB/TD/260/06 sheet 1/1 and applying a coat of blown hot bitumen 95/15 over a membrane at 1.20 kgs/sqm all as per detailed specification and procedure after drying apply a coat of solar reflective bituminous aluminium paint over membrane at 0.10 kg/sqm all as specified and as directed. (Note:- (i) The work shall be carried out only through approved manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT.

Material and labour for applying Nitobond AR by M/s FOSROC chemicals for bonding over old cement surfaces complete all as specified and as directed.

Removal of concrete and plaster debris to a distance of 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Material and labour cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour Rendering 15 mm thick cement plaster in CM 1:6 for fair faces of brickwork or concrete surfaces of wall finished even & smooth without using extra cement all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats of Acrylic distemper over a coat of primer all as specified and as directed.

Material and labour for Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Acrylic distemper on old distempered surfaces of walls, pillasters, cornices etc., all as specified and directed.

Material and labour for rendering 5mm thick on fair faces of brick work or concrete surfaces of ceilings in cement mortar 1:3 finished even and smooth without using extra cement all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surfaces and applyiing two coats of white wash all as specified and directed.

Preparation of old decorated surfaces and applying one coat of white wash on ceilings etc all as specified and as directed.

Preparing old plastered surfaces of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer complete all as specified and as directed .

Material and labour 15 mm thick cement plaster in CM 1:4 for wall finished even & smooth without using extra cement all as specified and directed.

Preparing new plastered surfaces of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer complete all as specified and as directed .

Supply and fix wire netting of galvanised steel wire 0.91 mm dia size of mesh 12 mm on wall surfaces fixed with tinned tacks of wire staples all as specified and directed.

Material and Labour for green marble 10 mm to 12 mm thick as in skirting / border etc laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:4 for complete all as specified and as directed

Material and Labour for green marble 10 mm to 12 mm thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including screed bed or bedding layer in cement mortar 1:6, 15 mm thick or complete all as specified and as directed

E/M WORKS:- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for considering under credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specied and directed .

Taking down carefully unserviceable main switches/DB's from their position and removing materials from site all as specified and as directed .

Taking down existing sub main wiring with aluminum conductor cable of 2 of 4/6/10 sqmm with GI earth wire on and including wooden batten and removing materials from the site and making good distrubed surface of walls and and roofs complete all as specified and as directed by Engr-in-Charge

Material and Labour for point wiring with PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including MS sheet metal 1.2mm thick switch board with hylem sheet cover or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as directed by Eng -in Charge

One light point controlled by one, one way switch 5 Amp complete

One fan point controlled by one, one way switch 5 Amp complete

One 3 pin socket outlet 5 amp independent

One 3 pin socket outlet 5 Amp on the same board with other switch

one bell point controlled by one bell push

All as per srl item No 100 here in beforefor one 2 way light point controlled by two way switch

Supply and fix Bell push piano flush type 5 amp 240 volts all as specified and as directed .

Supply and Fix Musical type door bell AC 230 volts single phase coloured fancy type all as specified and as directed .

All as per srl item No 100 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in earth conduity conductor.

Supply and fix switch piano flush button single pole one way 5 Amp 240 V all as specified and as directed .

Supply and fix switch piano flush button single pole two way 5 Amp 240 V all as specified and as directed .

Supply and Fix swicth socket combination 2 in 1,3 pin 5 Amp flush type 240 volts complete all as specified and as directed .

Supply and Fix swicth socket combination 2 in 1,3 pin 16 Amp flush type 240 volts complete all as specified and as directed .

Supply and Fix ceiling rose surface backelite three terminal 240 volts complete all as specified and as directed .

Supply and Fix LED batten T8 LED Lighting fixture with CRCA batten complete with retrofit T8 polycarbonate ready to use 20 watt ,fitting fixing on wall/on roof/truss etc. complete all as specified and as directed. Make - C&S , Code-LTDC01220WLED/WD or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix lamp holder PVC/Polycarbonate type with back plate suitable for batten fitings complete all as specified and as directed .

Supply and Fix fan regulator, electronic, step type , flush mounting complete all as specified and as directed .

Supply and Fix LED retrofit lamp B-22 holder base with polycarbonate diffuser and aluminium heat shrink 7 Watt C&S Make -Code- LTHPLEDLAMP7W/B22 or equivelant model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Taking down & refixing of existing fancy type fitting all as specified and directed.

Taking down & refixing of existing MH fitting 250 watt all as specified and directed.

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 6 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 6 sq mm cable and one run of 6 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Sub main wiring with four single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with two run 6 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Four runs of 6 sq mm cable and two run of 6 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 4 sq mm cable and one run of 4 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Supply and Fix Vertical TPN MCB DB double door 4 way with MCB as incommer with 200Amps rated bus bar 415 volts, 50 Hz with TP//DP/SP MCBs as outgoing, IP-54 Protection ,door earthing ,isolated neutral bus bar,mechnical impact strength IK 09 fixing in wall all as specified and directed. Make :- Indoasian cat part No-(811882 ) or equivelant model of Make specified in List of Manufacturers.

Supply and Fix and connecting up complete for MCB DB SPN 12 way Horizantal ,double door, 240 V AC , 50 Hz, with MCB as incomer and TP//DP/SP MCBs as outgoing, IP-42 protection confirming to IS- 13032 universal mounting with copper bus bar , neutral link, earth link, earthing studs, detachable gland plates with knock out on both sides complete all as specified and as directed.

Supply and Fix and connecting up complete for MCB DB SPN 8 way Horizantal ,double door,240 V AC , 50 Hz, with MCB as incomer and TP//DP/SP MCBs as outgoing, IP-42 protection confirming to IS- 13032 universal mounting with copper bus bar , neutral link, earth link, earthing studs, detachable gland plates with knockout on both sidescomplete all as specified and as directed.

Supply and Fix and connecting up complete for MCB DB SPN 4 way Horizantal ,double door,240 V AC , 50 Hz, with MCB as incomer and TP//DP/SP MCBs as outgoing, IP-42 protection confirming to IS- 13032 universal mounting with copper bus bar , neutral link, earth link, earthing sluds, detachable gland plates with knockout on both sides complete all as specified and as directed.

Supply and fix MCB TPN 63 Amps 440 volts, 50 Hz AC supply complete all as specified & directed .

Supply and fix MCB TPN 40 Amps 415 volts, 50 Hz AC supply complete all as specified & directed .

Supply and fix MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified & directed .

Supply and fix MCB SPN 32 Amps 240 volts, 50 Hz AC supply complete all as specified & directed .

Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 5 of SSR Part-I and testing on completion.

Taking down ceilng fan/exhaust fan,dismantling blades and removing fan and blades to store, Painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector of fan .

Supply and Fix swicth socket outlet 5A, 2 in 1,5 pin flush type, 240 volts complete all as specified and as directed .

Supply and fix MCB TP 40 Amps, 415 volts, 50 Hz AC supply complete all as specified & directed .

Supply and fix PVC blanking plate complete all as specified & directed .

M/S JAYDEEP CONSTRUCTION

ASHIRWAD ELECTRICALS

DHAIRYASIL RAMAKANT DESAI