8397 SPECIAL REPAIRS TO BLDG No. 18 RF LINE AND PROVN OF TOILET CUM BATHROOM NEAR MAIN GATE OF CHSC AND PROVN OF PERIMETER FENCING FOR VOLLEY BALL COURT AT CMDC UNDER GE SOUTH PUNE

Amount

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

All as per Ser. item No 5.00 above but fixing only complete all as specified and directed

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 20cm centres complete all as specified and directed.

Material and labour for 2nd class hardwood plain fillets square, rectangular in section exceeding 13 sqcm but not exceeding 25 sqcm clean sawn fixed with nails

Fixing only 2nd class hardwood plain fillets square, rectangular in section exceeding 13 sqcm but not exceeding 25 sqcm clean sawn fixed with nails

M&L for filleting in any position and to any shape in cement mortar 1:3 including all mitres/stops, etc sectional area 25 to 50 Sqcm complete all as specified and directed

M&L for weather boarding, 2nd class hardwood clean sawn, 20-25mm thick and rebated on thick edge to give 20mm laps and fixed to wooden / steel member including two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed

M&L for preparing new surfaces of wood and wood based materials of any description and girth not other wise described and treating with two coats of creosote oil complete all as specified & directed.

Demolition of reinforced cement concrete complete all as specified and directed.

Dismantling wall and ceiling boards , any thickness, including cover fillets complete all as specified and directed.

S&F gypsum ceiling board for ceiling of approved pattern finish 595x595x9 to 9.5mm thick in size of approved brand / make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling by using 2mm dia GI suspension wires spacing @ 1200mm on main runners including making niches for fans / ceiling lights, complete all as specified and directed

S&F PVC false ceiling consisting of 595 X 595 mm , 5mm thick plain exposed PVC sheet of 600 kg/cbm density manufactured by an ISO certified company,used as panel inserted in a frame work made from anodised aluminium T-section of sizes 25X25mm 19 gauge or 1mm thick in square pattern of grid 600X600mm.The minimum frame work supported from the ceiling with 'J' hooks and GI wire/6mm MS rod of required size to maintain proper level etc.The aluminium frame work is supported on side wall with the use of alum 'L' section of 25X25mm angles etc complete all as specified and as directed by Engr-in-Charege. (Make :M/s Rajshree / Armstrong / Syntex)

M&L for plaster of paris (POP) designer ceiling including framework and allied items, including designed corners and sides of ceiling as approved by Engineer-in-Charge complete all as specified and directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers or L-type or J-type or cranked hook bolts in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S & F Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering / ridges, fixed with self tapping screws, coach screws and washers or L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, post where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates.

Dismantling of wrought or MS work of any description etc as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

All as per Sr. item No 28.00 above but on old surfaces complete all as specified and directed

Disconnecting existing tank of capacity not exc 1000 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position (cleaning, repairing etc measured separately) complete all as specified and directed. (Note :- The rates shall deemed to be inclusive of necessary temporary arrangements for un interrupted water supply to users)

S&F of rotational moulded polythene water storage tank (1000 litres capacity) of tripple layers (cylindrical vertical with closed top) hoisted and fixed in position with and including locking arrangement device, tank brass tank nipple of suitable size & other fitting & fixtures, complete all as specified and directed

Demolition of brick/PCC block/stone masonary built in cement mortar complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping on top of wall, bed blocks, base of tank and the like inculding weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed (NOTE : WPC shall be measured and paid seperately)

M&L for flush pointing to squared rubble masonry, coursed or uncoursed with CM 1:4 complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on stone masonry / brick / concrete surfaces finished even & smooth including dubbing out cement plaster of 15mm average thickness on stone masonry / brick / block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. (Note: Necessary Precaution should be maintain to dubbing out plaster from stone wall.)

M&L for preparation of new plastered & flush pointed surfaces and applying two coats of exterior emulsion paint over a coat of primer paint all as specified.

M&L for preparation of old/new plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer, complete all as specified and directed

M&L for preparation of old /new mangalore pattern tiles surfaces and applying two coats of exterior emulsion paint over a coat of primer, complete all as specified and directed

M&L for preparation of new/old plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over & including applying 2mm thick wall care putty, complete all as specified and directed.

Taking down chowkats or frames of wooden or steel or aluminum not exc 1.5 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats or frames of wooden or steel or aluminum exc 1.5 sqm and not exc 4 sqm (without taking off shutters from frames) complete all as specified and directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, 3nos hinges, lock strike plate etc complete as specified size of frame 125x60mm filled with PCC 1:3:6 type C-0, complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L Preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F butt hinges 100mm size stainless steel medium weight, complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded etc length of bolt 300mm complete all as specified and directed.

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.

S & F MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall complete all as specified and directed

Resecuring, easing & adjusting without taking down shutter of any description exc. 1sqm and n. exc. 2 sqm each including fixing of necessary iron mongry/fittings complete all as specified and directed. (Note :- One set of window of single/double/triple leaf and one door shutter of sinlge/double leaf shall be measured as one job)

S&F in repairs 18/19 mm Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work including locking arrangements complete all as specified and directed .

S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S&F 100mm dia cupboard handles fixed with nuts screws and washer of brass polished complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore of pipe, medium weight, complete all as specified and directed

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and not exc 20cm girth, complete all as specified and directed

Taking up or down carefully steel tubing and connections including cleaning for refixing / remove to store complete all as specified and directed of following sizes :-

15mm bore

20mm bore

S&F and testing GI tubing "medium grade" galvanized with all fittings and fixtures, fixed to walls or ceiling or laid under floors / trenches etc complete all as specified and directed of the following sizes :-

15mm bore

20mm bore

S&F gun metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.

All as per Sr. item No 69.00 above but 25mm bore, complete all as specified and directed

S&F 25mm bore brass ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed etc, complete all as specified and directed.

Dismantling of drain pipes AC /CI/PVC pipes of various dia jointed in CM or adhesive 75 to 110mm dia, complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 110mm dia including all necessary fittings complete as specified

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 75mm dia including all necessary fittings complete as specified

S&F in repairs Counter top basin of Size 610x415x160mm complete all as specified & directed. Make : Jaquar Product code DRS-WHT-37601 or equivalent model makes as mentioned here-in-after.

S&F Bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. (Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent model makes as mentioned here-in-after.)

S&F Basin Mixer for hot and cold water without popup waste with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model makes as mentioned here-in-after.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

Cutting holes in brick walls built in cement mortar for bolts, joist, pipes, air flues, ventilators and cast iron boxes superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM (1:3) or PCC (1:2:4) type B-1 as required.

S&F Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No CON-CHR-281KN of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, brass chromium plated, fancy type & conforming to CAT No ARI-CHR-39037 of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No ACN-CHR-1111N of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F CP toilet paper holder confirming to CAT No ACN-CHR-1151N of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F CP Soap dish confirming to CAT No ACN-CHR-1131N of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F Corner glass shelves with brackets CAT No ACN-CHR-1173 of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs CP shower rose 125mm dia with arms for 15mm bore of pipe conforming to CAT No OHS-489 of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs CP towel ring square conforming to CAT No. ARI-CHR-1121 N of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs CP 15mm bore concealed stop cock with long neck conforming to CAT No. ARI-CHR-39089 of "Jaquar" or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repairs Hand Shower( Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-577 or equivalent model in makes as mentioned here-in-after, complete all as specified and directed.

S&F in repair stainless steel grating 150mm size of ISI mark complete all as specified and as directed.

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc. and removing debries from the site, complete all as specified and directed.

Demolition of PCC of any description and in any position not other wise specifically provided for , complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M & L for coloured matt finish Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed.

M&L for coloured matt finish vitrified tiles 600 x 1200 x 10mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

S & F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, kambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for Rounding edges of granite stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and smooth using extra cement as in plinth protection, PCC path complete all as specified and directed.

S&F in repairs cast iron floor/Nahani trap with grating 100mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete all as specified and directed.

Demolition and breaking up RCC, SWG, CPVC drain pipes set in cement mortar for 150mm bore pipe and removing debris from the site complete all as directed by Engr-in-Charge

M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for for 150mm bore RCC hume pipe complete all as specified and as directed.

M&L RCC pipes 150mm bore class NP-2 with socketed ends laid and jointed , complete all as specified and directed. (Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same deemed to be included in unit quoted rates)

S&F in repairs PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm etc, complete all as specified and directed.

M&L for precast factory made manhole cover with frame of medium duty, of size Square/rectangular/circular area of each cover exc. 0.35 Sqm and n.exc. 0.75 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as require for 150mm dia pipe complete all as specified and directed.

Excavating in post holes (or similar holes) in hard /dense soil each not exceeding 0.5 Cum, getting out, returning filling and removing surplus soil to a distance exc 50 m and naking good surface complete all as specified and directed .

M&L for PCC (1:4:8) type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for MS work as in fencing post and struts including cutting tops to shape as directed drilling holes, notching for wire etc., Flat iron fillets (for securing wire mesh etc.) including all necessary drillilng bolting or reveting etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Supply only chain link MS galvanised fencing size of mesh 75x75mm of 3.5 mm dia wire as complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M & L for Two coat of Synthetic enamel painting to steel surface not exceed 10 Cm width or girth over one coat of red oxide including preparation of surface complete.

S&F MS screw machine made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 5cm but not exc 10 cm long and 16 to 20mm dia of neck including welding with hold fast and gate complete all as specified and directed.

Supply & Fixing MS framed work such as framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc with ends of bars shouldered and/or riveted, or forged into spikes and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting ou in soft / loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspitsl manholes, pier holes, etc. n exc 10 sqm. on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling. watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated material 50m to 250mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for RCC M25 in Foundations, including / rafts, footings, foundation . beams; plinth beams; bases for colunllls, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M25 in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC M25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC M25 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC M25 in Chajjas complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work finish rough surfaces, complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, finish fair surfaces, complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, verhangs, etc. also splays between floors andbeams, etc. , finish fair surfaces, complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), finish fair surfaces, complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, finish fair surfaces, complete all as specified and directed.

M&L for TMT bars,10mm dia & over , cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT bars, 6 to 8mm dia (as in stirrups) , cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4) complete all as specified & directed.

M&L water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying 3mm thick APP polymer modified approved membrane non woven, polyster weighing not less than 3 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10mm thick in CM (1:6) on brick/concrete surfaces finished even & smooth complete all as specified and directed

M&L for rendering 5mm thick in CM (1:3) on ceiling concrete surfaces finish even and smooth surfaces without using extra cement, complete all as specified and directed

Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

All as per Sr. item No. 139.00 above but on celing surface, complete all as specified and direced.

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channels, chajja coving and base slab for tank complete all as specified and directed.

M&L for hardcore of broken stone, gauge not exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base/flooring complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed by Engineer-in-Charge.

S & F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, kambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

S&F PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed.

S&F cast iron floor/Nahani trap with grating 100mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete .

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor & the side of waist slab with suitable arrangement complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105x60mm filled with PCC 1:3:6 type C-0 , complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction with block board core construction and plywood face panels commercial type on both faces incl 6mm thick 1st class HW (Teak wood) beading all around on edges, complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white flat back of size 550x400mm including 15mm dia CP pillar tap, PVC waste coupling 32mm, chain and plug and PVC waste pipe, PVC connection 45cm long including CI brackets/fixing with fasteners etc complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections and 32mm thick PVC Flush pipe for low level cistern etc. complete all as specified and directed.

S & F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) including Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) and Urinal partitions slabs terminating about 40cm above floor line, including chromium plated waste coupling 32mm dia complete all as specified and direcrted.

S&F bib cock 15mm bore standard of PTMT screwed down high pressure handle screwed for iron pipe or for unions complete all as specified and as directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms), complete all as specified and directed.

S&F CP 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated complete all as specified and as directed.

S&F Grating round 140 mm size of PTMT.(Minimum weight 50gms) complete all as specified and as directed.

M&L for RCC pipes 150mm bore, class NP-2 with socketed ends laid and jointed complete all as specified and as directed.

M&L for construction of 10 users septic tanks with and including necessary excavation and earth work in any type of strata of soil / rocks (if any) complete all as shown on drawings No. CEPZ/88/TD/17M Sheet 1/4 to 4/4 all as specified here-in-after.

M&L for costruction of Soakage well of size 1.20m dia (diameter of soakwell marked as 'd' in drgs) and 3.00m deep with and including necessary excavation and earth work in any type of strata of soil / rocks (if any) complete all as shown on drawing No. CEPZ/2019/TD/03 Sheet 1/2 to 2/2 dt 30 Apr 2019 and all as specified here-in-after (Note for Ser. Item No. 162 & 163 above : Drawings are not enclosed with tender but these shall be deemed part of tender documents and may be available to see in office of GE / AGE)

M&L for cutting existing steel tubing of size 25/32 mm bore for insertion of tee 40x40x25 mm including necessary joints for branch connection etc complete complete all as directed.

M&L for preparing old surfaces of wood and wood based materials of any description or girth not other wise described and treated with one coat of creosote oil.

M & L for point wiring with colour coding as per IS with multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable drawn through in and including heavy duty PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, including GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches of Make- Legrand (Myrius) or equivalent Honeywell / Havells / Phillips including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light/fan point controlled by one switch and regulator

Switch Socket outlet, three pin, 5 Amp, independent

One switch socket outlet, three pin 5 Amps on same board.

Bell / Buzzer point controlled by one bell push.

Description all as per Sr. item No 166.00 above but using 2.5 sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F modular switch 6A,one way 1 module, complete all as specified and directed by Engineer-in-Charge.

S & F modular switch 16A,SP one way 1 module, complete all as specified and directed by Engineer-in-Charge.

S & F modular sockets 6A, 2/3 pin universal combine 2 module, complete all as specified and directed by Engineer-in-Charge.

S & F modular sockets 6/16A, 2/3 pin combine 2 module, complete all as specified and directed by Engineer-in-Charge.

S & F modular bell push 6A, SP one way 1 module, complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular step fan regulator 120 watt, 2 module suitable for 230 volt 50 Hz AC supply, complete all as specified and directed.

S&F ceiling rose surface type, three terminals, complete all as specified and directed.

Supply, laying, testing and commissioning of 10 Sqmm, 2 core underground LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armored, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimping type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches / fixed to poles / drawn through pipes complete all as specified and directed.

S&F MCB DB 8 way ,double door, with 200 amp rated busbar 240 V, SPN recess mounted / wall mounted, complete all as specified and directed.

S&F MCB SP 6-32 Amps,10KA,'C' series, complete all as specified and directed.

S&F MCB SPN 10-40 amps,10KA, 240V,'C' series, complete all as specified and directed.

Supply and fixing LED light fitting, 1X20 Watt surface mounted LED high efficiency LED luminary smart bright ingress protection : IP66 with acrylic cover comprises pre-wired with high efficiency electronic driver, high translucent frosted diffuser gets glare free, smooth light distribution complete all as specified and as directed. (Make : Philips cat no-BN021C LED20S PSU NW GR OR equivalent in Wipro/Bajaj)

Supply and fixing Integral LED security Light Luminaries 20 watts comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame with and including GI pipe bracket of suitable size for fixing with fitting on walls complete all as specified and directed.

Supply and fix in repairs LED mirror light fittings wall mounted type suitable for 1x10 watt with high output diffuser and all fixing arangements conforming to Cat Part No BN021 LED 10S-6500 PSU GRS1 as per Philips or equivalent to Bajaj / Havells), complete all as specified and directed.

Supply and fix industrial exhaust fan , noise free, AC single phase 230/ 240 volts of size 300 mm sweep, 1400 RPM iron body with shutter including suitable size hole as per sample of exhaust fan complete and all fixing arrangements all as per the directions given by Engr-in-charge. (Make :- Bajaj cat No-70046 or equivalent in Philips/ Havells)

S&F water heater storage type, electric supply and installed complete of capacity 25 litres including taking down old geysers and deposited in MES store yard complete all as specified and directed. (Make :- Bajaj & equivalent in Philips / Havells)

M&L for laying reinforced concrete pipes, class NP2 of dia 80 mm, 2 nos half round (for bottom and top) and before laying exacaved area shall be leveling, complete all as specified and directed.

Taking down point wiring( light, fan, socket or power) any type complete, including fixtures and fittings such as switches, ceiling roses, pendants,regulators sockets, loght fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

Taking down old unserviceable / worn out aluminium sub main of any type and size, complete all as specified and directed.

Taking down old unserviceable /worn out DB,s any type and size , complete all as specified and directed.

S&F electric bell 230V, ding dong , complete all as specified and directed.

S & F sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity,'C' series, 240 V, complete all as specified and directed.

S&F lamp holder (Angle / bracket) insulated body, with back plate for batten fittings complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 4 sqmm in and including caping casing including cutting chases, pinning in making good to facings where required complete all as specified and as directed. (Note :- 3 runs of 4 sqmm copper conductor cable & one Rm of caping casing shall be measured as one unit)

M & L for sub main wiring complete with two single core 6 sqmm ,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of 6 sqmm in and including caping casing including cutting chases, pinning in making good to facings where required complete all as directed by Engineer-in-Charge. (Note:- 3 runs of 6 sqmm copper conductor cable & one run of caping casing shall be measured as one unit)

M & L for Sub main wiring complete with four single core 10 sqmm,1100 volts grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor of one 10 sqmm in and including caping casing including cutting chases, pinning in. making good to facings where required complete all as directed by Engineer-in-Charge. (Note:- 6 runs of 10 sqmm copper conductor cable & one run of caping casing shall be measured as one unit)

S&F IP-43, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to match the disturbed surfaces to existing surface, complete all as specified and directed. (Make - Legrand / ABB/L&T) (Note- MCCB 100 Amps 4 pole 25 KA as incomer will be measured & paid separately under respective items of BOQ.)

S&F IP-43, IK 09, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to match the disturbed surfaces to existing surface, complete all as specified and directed. (Make - Legrand / ABB/L&T) (Note- MCCB 100 Amps 4 pole 25 KA as incomer will be measured & paid separately under respective items of BOQ.)

S&F MCB DB 8 way ,double door, with 200 amp rated busbar 240 V, SPN recess mounted / wall mounted, complete all as specified and directed.

S&F MCB DB 4 way double door with 200 amp rated busbar, 240V SPN recess mounted / wall mounted, complete all as specified and directed.

S&F MCB SP 6-32amps, 10KA, 'C' series, complete all as specified and directed.

S&F MCB SPN 10-40 amps, 10KA, 240V, 'C' series, complete all as specified and directed.

Supply and Fix MCB TP 63 Amps,10 KA, 415V , complete all as specified and directed.

Supply and Fix MCCB TPN 100 Amps, 25 KA, 415V complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to galvanized iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanized iron or steel earth strip of 32x6mm size protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed upto

Ser. Item No. 202.00 Contd... minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. (NOTE:- GI strip and GI pipe 40mm bore medium grade for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.)

M & L for earthing complete with galvanized steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to galvanized iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanized iron or 4mm dia GI steel wire protected by provision of GI 'medium grade' pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm

Ser. Item No. 203.00 Contd... all around the earth plate, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. (NOTE:- GI wire and GI pipe 15mm bore medium grade for encasing GI wire upto 7.50m length per earthing shall be deemed to be included in the unit rate.)

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed.

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

S&F LED luminaire recess mounting LED 2x2 slim LED luminaries 36 wattage CCT (k) 6500 with white powder coated CRCA housing with LEDS fixed to housing complete lighting as per site requirement complete all as directed. (Make:- Cat Part No OF WIPRO CRCO10R038HP57GLI or equivalent in Philips / BAJAJ)

S&F in repairs LED mirror light fittings wall mounted type suitable for 1x10 watt with high output diffuser and all fixing arangements conforming to Cat Part No BN021 LED 10S-6500 PSU GRS1 as per Philips or equivalant to Bajaj/Havells)

S&F water heater storage type, electric supply and installed complete of capacity 25 litres including flexi connection set 450 mm bore dia for geyser connections including taking down old geysers and deposited in MES store yard, complete all as directed. (Make :- Bajaj cat part No 150743/25 L & equivalent in Philips/Havells)

S&F CP brass bib tap of size 15mm bore fancy type, complete all as specified and as directed.

Supply and fix plastic exhaust fan , noise free, AC single phase 230/ 240 volts of size 250 mm sweep, RPM 1350 and all fixing arrangements all as directed by Engr-in-charge. (Make - Bajaj cat no-70049 or equivalent in Philips/ Havells)

Supply and fixing Integral LED security Light Luminaire 35 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame with and including GI pipe medium grade bracket of suitable size for fixing with fitting & fixtures, fixing on wall complete with accessories conforming to Cat Part No of WIPRO LR02-391-XXX-57XX or of equivalent in PHILIPS / BAJAJ. complete all as specified and directed.

Supply and fixing ceiling fans complete with accessories like down rod, canopy etc, 230 volts, 1200 mm sweep BLDC and minimum air delivery 210 CFM including taking down old ceiling fans & deposit in MES store yard , complete all as specified & direcetd. (Make - Bajaj cat no-250823 or equivalent in Crompton / Havells)

Supply, laying, testing and commissioning of UG LT cables of size 50 Sqmm 3.5 core, 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS-1554 part-I, including cable glands, crimpimg type cable lugs in LT panel/MCCB in bldg etc to suit the cable laid in trenches/ fixed to poles/drawn through pipes complete all as specified and as directed.

S&F GI tubing 80 mm dia Light grade for cable protection laid in wall /floor / pole with MS clamp , bolt nuts including taking down complete all as specified and directed .

Gauri Associates

Santosh Pandurang Pise

Raj Construction Company

M/s.BAJRANG CONSTRUCTION

ANIL CONSTRUCTION CO.