NNT 2025 - 2026 Construction of Public Distribution shop at Thanumaalayanputhoor in Aralvoimozhi Town Panchayat

Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification

Plain Cement Concrete 1:4:8 (One Cement, Four Crushed Stone Sand and Eight aggregate) mix using 40mm ISS HBG metal including cost and conveyance and all labour charges etc. complete.

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement.

Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36

Supply and fabricating and placing in position of steel Reinforcement using Mild steel of Ribbed tor steel rods for all RCC works as per the design given by the department officers including cost of steel and binding wire and all labour charges for cutting bending and tying and placing in position etc., complete as per SS

Reinforced cement concrete 1:11/2:3 (one cement one and half Crushed Stone Sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3

Brick work in cement mortar 1:5 mix using (One cement and five Crushed Stone Sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C- 10m3

Plastering with cm 1:3 mix (One Cement and Three Crushed Stone Sand), 10mm thick cost and conveyance of all materials finishing, curing and all labour charges etc complete as per standard specification.

Plastering with cm 1:4 mix (One Cement and Four Crushed Stone Sand), 12mm thick cost and conveyance of all materials finishing, curing and all labour charges etc complete as per standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)