801682 ADDN / ALTN TO BUILDING NO P-535 OF CE (AF) BANGALORE OFFICE

Amount

SCHEDULE 'A' PART - I (B/R WORKS) Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Removing building materials etc (other than soil) to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Material and labour for Double charged Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Material and labour for Double charged Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exceeding 1.00 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Material and labour for coloured Glazed ceramic tiles in vertical surfaces, size 600X 300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and including 10mm thick backing coat of cement mortar 1:4 complete all as specified and as directed.

Material and labour for Sadarahalli Stone (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over & including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over & including 20mm thick screed bed in CM 1:4 complete all as specified and as directed. complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white including plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' trap, including 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash down water closet wall hung (pedestal pattern) EWC white with coupled flushing cistern including plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' trap including connecting flush pipe with flushing cistern single piece WC complete all as specified and as directed.

Supply and fix in repairs wash basins, vitreous China thin rim table top basin including cutting for and pinning in ends of brackets or erecting stand incl supply and fixing of waste couplings, waste pipe complete all as specified and as directed.

Supply and fix in repairs vitreous China urinals, Sensored Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

Supply and fix in repairs brass Chromium plated Tubular towel rail 20mm D Type dia, 60 cm long complete all as specified and as directed.

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Taking up or down steel water tubing and connections 15 mm dia complete all as specified and as directed

Taking up or down steel water tubing and connections 20mm dia complete all as specified and as directed

Supply and fix steel tubes medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor, bore of pipe 15mm including making hole in RCC slabs for vertical pipes & making good the same with cement concrete 1:2:4. complete all as specified and as directed.

Supply and fix steel tubes medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor bore of pipe 20mm including making hole in RCC slabs for vertical pipes & making good the same with cement concrete 1:2:4 complete all as specified and as directed.

Supply and fix in repairs Unplasticised PVC pipes 50mm of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed.

Supply and fix in repairs 75mm PVC (SWR) floor trap, plain with CP grating including, jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs of CP 1.5m pipe health faucet complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated 2-in-1 tap 15mm bore for fixing of health faucet complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix PVC (SWR) vent cowl of 110 mm bore complete all as specified and as directed.

Supply and fix in repair 15 mm bore fancy type single lever Basin mixer chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed.

Supply and fix in repair 15 mm bore stop/angle valves cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed both ends for pipe or union complete all as specified and as directed.

Supply and fix Brass chromium plated towel ring complete all as specified and as directed.

Supply and fix Grating doom 150 mm dia with waste hole of Chromium plated complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

Supply and fix 50mm dia PVC bend any radius complete all as specified and as directed.

Supply and fix PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed.

Supply and fix PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed.

Supply and fix PVC (SWR) reducers 110 mm complete all as specified and as directed.

Dismantling water tanks capacity exceeding 500 Ltr & not exceeding 1000 ltr complete all as specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipes any length and in any position(with clamps in wall) complete all as specified and as directed.

Material and labour for 150 mm bore reinforced concrete pipes, class NP-2, laid and jointed complete with collars as specified and directed by Engr-in-Charge.

Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 sqm each with shutters(Without taking off shutters from the frames) complete all as specified and as directed.

Supply and fix factory made frame single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and as directed.

Supply and fix butt hinges 100 mm long medium weight, cold rolled stainless steel complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 150mm long complete all as specified and as directed.

Supply and fix aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

Supply and fix 250 mm long aluminium alloy sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast of extruded section complete all as specified and as directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and as directed.

Material and labour for providing and fixing factory made uPVC wooden colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Area not exceeding 2.00 sqm each complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Taking down shutters not exceeding 2 sqm each complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters not exceeding 2 sqm each complete all as specified and as directed.

Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including one face is covered with decorative face veneer with lipping/frame to match all as specified and as directed.

Cutting holes in stone wall exceeding half brick and not exceeding one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed.

Material and labour for MS work (flat iron) 25mm x 3mm thick) in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including taking down existing one complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Material and labour for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for rail work complete all as specified and as directed.

Supply and fix Stainless steel pipe Grade 304 as in railing complete all as specified and as directed.

Supply and fix toughened frosted glass door 12 mm without frame fixed with floor double swing hydraulic door closer including lock and key system and fancy SS handles at both side of each shutter and necessary arrangement to made complete all as specified as directed.

Supply and fix mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix powder coated aluminium frame work for door frame/ partition with one or more rebates including joining cleats, hooks, hangers, beadings, tower bolts, hinges, rubber gaskets etc, minimum thickness of powder coating 50 micron complete all as specified and as directed.

Supply and fix powder coated aluminium (powder coating not less than 50 micron) side hung door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fix powder coated aluminium (powder coating not less than 50 micron) side hung window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fix 5mm thick Figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and fix anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified and as directed.

Supply and fix in repairs hangers 6mm dia GI (up to 1200 mm length fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and as directed.

Supply and fix Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions including applying two coats of acrylic distemper over a coat of primer over 1 mm thick putty complete all as specified and as directed.

Material and labour for providing and fixing single extruded PVC louvers of approved color for ceilings, interior wall panelling, etc. The louvers shall have dimensions of 2900mm (length) x 160mm (width) x 24mm (height), with a tolerance of ± 5%. The composition shall include virgin polymer with a K value of 58–60 (suspension grade), calcium carbonate, natural fibers (such as wood powder, rice husk, or wheat husk), and non-toxic additives. Having Class A category resistance to spread of flame criteria. Additionally, the louvers must be termite/borer proof, water/moisture proof, and fire-retardant. and all as specified and as directed.

Supply and fix mild steel powder coated pelmet rods 25mm outer dia including 2 Nos of brackets 2 Nos of pintals or side brackets as per site requirement complete all as specified and directed.

Supply and fix Collapsible steel gates, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

Supply and fix 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix Door closer, aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

Supply and fix brass mortice lock (4 levers), vertical type, size 100mm long complete all as specified and as directed.

Supply and fix in repairs brass mortice lock (4 levers), vertical type, size 100mm long complete all as specified and directed.

Removing existing unserviceable tar felt on any type or any description from roof slab alongwith screed bed, cleaning of surfaces & removing the debris to a distance exceeding 250m from the starting point complete all as specified and as directed.

Material and labour for rendering 15mm (average) thick in cement mortar (1:4) on concrete surface complete including liquid water proofing compound asper manufacturer's instruction all as specified and as directed NOTE- WPC will be measured and paid separately.

Material and labour for Roof treatment for in-accessible roof as under: - (i) Preparation of surfaces by removing all dust, loose particles of RCC slab. (ii) Providing and laying / fixing TPO (Thermoplastic Polyolefin) waterproofing membrane on prepared surface of roof & up to 30 0mm of parapets and crumple joint including junction of roof and parapet. This stage shall be passed by the GE. Roof surface shall be left without any further treatment. (ii) Cleaning the surface and laying FOSROC Proofex ORG or its equivalent in MC Bauchemie / CIPY/ SIKA/ Pidilite Dr Fixit / STP / Berger / Asian paints (minimum 1.2 mm thick for in-accessible roof/ 2 mm for accessible roofs) over a min. 200 GSM Geo textile or Asian Paints TPO or equivalent product of M/s MC Bauchemie / CIPY/ SIKA/ Pidilite Dr Fixit / STP / Berger TPO membrane, applied as per manufacturer’s instructions. (iv) The work shall be carried out complete as per manufacture’s specifications and application methodology. Execution to be done with authorized trained/skilled applicator of manufacturer as per the technical guidelines laid by manufacturer. Company back guarantee to be given by contractor after completion of Water Proofing work before payment complete all as specified and as directed.

Taking down cement plaster from old walls and raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and using water proofing compound complete all as per manufactures instructions. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ as supply only.

Supply only liquid water proofing compound of approved make (ISI Marked) complete all as specified and as directed.

Material and labour for new plastered surfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfaces make the surface free from dust and applying two coats of exterior oil emulsion paint(weather coat) over one coat of exterior wall care primer complete all as specified and as directed.

Material and labour for rendering 15 mm thick cement plaster in cement mortar 1:6 on wall surface finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surfaces of wall, pilasters, cornices, etc. and applying two coats of acrylic distemper over a coat of primer over 2 mm thick wall care putty complete all as specified and as directed.

Material and labour for rendering 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete 1:3:6 type C-2, using 40mm graded stone aggregates as in plinth protection finished fair and even. PCC shall be laid in alternate panels not exceeding 2 sqm and 6 mm wide joints throughout the thickness. Joint shall be filled with mastic filling 1:3(Bitumen & sand) complete all as specified and as directed.

Material and labour for preparation of new plastered ceiling surfaces and applying two coats of acrylic distemper over a coat of primer including 2 mm thick putty complete all as specified and as directed.

Material and labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old plastered surfaces of wall, pilasters, cornices, etc. and applying two coats of acrylic distemper over 2 mm thick putty complete all as specified and as directed.

Material and labour for applying two coats of acrylic distemper over a coat of primer on ceiling over 1 mm thick putty including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

Material and labour for Old plastered surfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfaces make the surface free from dust and applying two coats of exterior oil emulsion paint(weather coat) over one coat of exterior wall care primer complete all as specified and as directed

Material and labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats all as specified and as directed.

Material and labour for providing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh. The ceiling may have sunk and raised moulding complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of ceiling of any description and applying two coats of oil bound distemper over a coat primer complete all as specified and directed.

Material and labour for Elegant Fabric Tile made of perforated cement fiber composite 600X600/600X1200X5mm with square edge density 1050kg/m3 covered with fabric on the front side and Acoustics fiber on the back side, water resistance, and fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with Aluminum H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and as directed.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and all as specified and as directed

Material and labour for Finishing walls with textured interior paint of required shade complete removal of existing treatment (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of interior primer applied @ 2.20kg/10 sqm all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth, not otherwise described complete all as specified and as directed.

Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Supply and fix 25mm thick preformed bitumen filler for crumple joints complete all as specified and as directed.

Demolition and breaking up 200mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

M&L for concrete bed for 200 mm dia pipe including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and directed.

Material and labour for 200 mm bore reinforced concrete pipes, class NP-2, laid and jointed complete with collars as specified and directed by Engr-in-Charge.

Cutting into the existing manhole for connecting new drain pipe 200mm internal diametre making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished even and smooth benching complete all as specified and as directed.

Excavation in trenches in any type of soil (loose/ hard) not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out for foundation of pole, laying under ground cables etc and getting out complete all as directed.

M&L for cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Providing cement concrete 1:2:4 type B1 as in channel and benching of manholes in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Returning filling in with excavated soil including spreading, levelling, watering and well ramming in layers and not exceeding 25 cm in layer complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 Mtr and deposting where directed at a level not exceeding 1.5 Mtr above the starting point all as directed.

M & L for Providing precast cement concrete type B1, 1:2:4 (20mm graded aggregate) in manhole cover set in CM 1:6 complete all as specified and as directed.

M&L for TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Pre-cast cement concrete 1:3:6, type B-1 using 20mm crushed stone aggregate as in block masonry with solid blocks, exc. 10cm in width and setting in mortar built in cement mortar 1:4. complete all as specified and directed.

Providing and fixing seamless false ceiling of fully perforated GYPSUM board of size 595mm x 595 mm in approved design (Round/Square Hole) at all height including providing and fixing of GI frame work made out of steel galvanized @ 120 gsm zinc coating(both side inclusive) suspended from ceiling through 50mm long dash fastener, soffit cleat and ceiling angle bolted to intermediate channel of 45x15x0.9mm running at the spacing of 1200mm centre to centre. Ceiling section of 0.50mm thick with bottom web of 50.5mm spaced at 457mm centre to centre in a direction perpendicular to GI intermediate channel is fixed with connecting clip including fixing of perimeter channels of 0.50mm thick to the wall/partition with the help of PVC gitti & wooden screws at 450mm centre. Finally 8mm thick fully perforated calcium silicate board of size 1830mm x 1220mm having density > 900 kg/cum, NRC > 0.70, water, fire, termite resistant and backed with sound Tex make non - woven tissue (weight : 63 gram/sqm) having properties of fire retardant, VOC free and free from halogens and antimony is to be screwed to the ceiling section and perimeter channel with the help of 25mm long dry wall screws at 230mm c/c, including jointing and finishing to a flush finish using USG sheetrock multipurpose jointing compound followed by painting with acrylic emulsion in approved shade, false ceiling all complete as above and inclusive of provision for openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitable fixed. 50mm thick Glass wool of density 48 kg/Cum shall be provided behind calcium silicate boards.

Supply and fixing Aluminium composite panel of approved make 4 mm thick wit 0.5 mm thick skin & PVDF coated approved shade for wall panelling in rectangular or circular shape. Main framing work to be done using 50mmx25mmx1.6mm tubular section of approved make . Stainless steel screw to be used to fix the ACP panel to be fixed to the main frame with industrial adhesive tape and panel groove to be sealed with weather proof silicon sealant suitable for glass/aluminium etc .complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes minimum welding 5mm thick, conforming to I.S. 1161- 1979 grade YST -310 complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.

M&L for MS 16mm dia high performance anchor rod for injectable hybrid/Epoxy anchors (8.8 corbon steel) full threaded all along its length of 30cm long grouted to RCC structure with styrene free vinylester resin anchor tropical grade of pure epoxy 3:1 resin anchor as per manufacturer instruction. Make of anchor rod: Hilti HITV-8.8, or equivalent Make of Resom: Fosroc E77 or equivalent.

M&L 3mm thick Galvalume corrugated decking sheet, min 275GSM cold formed as per IS-277 fixed with self tapping stainless steel screws in floor / roof all as specified and as directed.

M&L for PreCast AAC Block Masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

SCHEDULE 'A' PART - II (E/M WORKS) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc complete all as specified and as directed.

Taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and as directed.

Taking down unserviceable main switches ,DBs and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and as directed.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades complete all as specified and as directed. Note:- Deposit to MES store yard .

Material and labour for Point wiring complete with 1. 5 Sq mm single Core PVC insulated FRLS cable, 1100 volts grade unsheathed with multi stranded copper conductor drawn through and including PVC rigid non metallic conduit on concealed with all fittings such as bend, end caps etc fixed on the surface of wall, ceiling, roof, steel structure etc. by means of suitable fixing accessories including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor, modular metal pressed flush box concealed in wall including suitable modules, modular white top cover and plate for housing the switches, sockets, regulators etc. complete all as specified and as directed. Note : (a) Cost for cutting chasing, modular metal flush cover plate, blanking plate in the wall for box and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate. Make of Flush metal Box, cover inner & outer plate Legrand (Myrius) / ABB (IVIE) /Schneider (OPALE)

a) One light point controlled by one way switch

b) One ceiling /wall mounted fan point controlled by one switch and regulator

c) One switch socket 5 pin 6 Amps flush type on independent board.

d) One switch socket 5 pin 6 Amps flush type on same board.

e) One exhaust fan point controlled by one switch

f) One Light point controlled by 2 two way switch

g) One bell/ buzzer point controlled by one bell push button

All as per item No 126 above but with 2.5 sqmm FRLS cable for one socket 5 pin 6 Amps flush type on independent board of 12 way box for PC System with including earth wire complete all as specified and as directed.

All as per item No 126 above but with 4.0 sqmm FRLS cable for one socket 5 pin 15Amps flush type on independent board with including earth wire complete all as specified and as directed.

All as per item No 126 above but light point (Security Light) controlled by one switch /MCB complete all as specified and as directed.

Supply and fix Modular switch 1 way 6A, 1 module complete all as specified and as directed. Make- Legrand Cat No. 679200 / ABB Cat No. 1SKY100001A1001/Schneider Cat No. AAKY1001

Supply and fix Modular switch 1 way 6/16A, 1 module complete all as specified and as directed. Make- Legrand Cat No. 679209 / ABB Cat No. 1SKY100001A1006/Schneider Cat No. AAKY1101

Supply and fix Modular switch 2 way 6A, 1 module complete all as specified and as directed. Make- Legrand Cat No. 679201 / ABB Cat No. 1SKY100001A1002/ Schneider Cat No. AAKY1002

Supply and fix Modular Bell push 6A 1 module complete all as specified and as directed. Make- Legrand Cat No. 679218 / ABB Cat No. 1SKY100001A1003/ Schneider Cat No. AAKY1005

Supply and fix Bell Multi Music type complete all as specified and as directed. Make - Anchor/Cona/Havells

Supply and fix Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. Make- Legrand Cat No. 679235 / ABB Cat No. 1SKY100001A1028 /Schneider Cat No. AAXY2005NS

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. Make- Legrand Cat No. 679230 / ABB Cat No. 1SKY100001A1023 /Schneider Cat No. AAKY2106

Supply and fix Fan step regulator, 60/120 W - 2 module complete all as specified and as directed. Make- Legrand Cat No. 679242 / ABB Cat No. 1SKY100001A1042 /Schneider Cat No. AAKY3200

Supply and Fix Ceiling rose, 3 terminal PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make - Anchor/Cona/Havells

Supply and fix 04 Nos modular Socket 6A - 2/3 pin combined 2 module and 04 Nos 6 Amp modular switch complete for PC system concealed in wall/surface all as specified and directed. Make- Legrand Cat No. 679235 / ABB Cat No. 1SKY100001A1028 /Schneider Cat No. AAXY2005NS

Material and labour for concealed sub main wiring with two run single core 1.5 Sq mm and one run of 1.5 Sq mm as earth continuity conductor 1100 V grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS-694) drawn through and including PVC conduit ISI marked including connected accessories such bend support etc led in wall/roof/ floor including cutting chasing if reqd etc complete all as specified and as directed. Note :-02 runs of 1.5 Sqmm for phase and neutral and 01 run 1.5 Sqmm for earth and one run of PVC conduit along with accessories will be measured as one run.

Material and labour for concealed sub main wiring with two run single core 2.5 Sq mm and one run of 2.5 Sq mm as earth continuity conductor 1100 V grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS-694) drawn through and including PVC conduit ISI marked including connected accessories such bend support etc led in wall/roof/ floor including cutting chasing if reqd etc complete all as specified and as directed. Note :-02runs 2.5 Sq mm for phase and neutral and 01 run 2.5 Sqmm for earth and one run of PVC conduit along with accessories will be measured as one run.

Material and labour for concealed sub main wiring with two run single core 4 Sq mm and one run of 4 Sq mm as earth continuity conductor 1100 V grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS-694) drawn through and including PVC conduit ISI marked including connected accessories such bend support etc led in wall/roof/ floor including cutting chasing if reqd etc complete all as specified and as directed. Note :-02runs 4 Sq mm for phase and neutral and 01 run 4 Sqmm for earth and one run of PVC conduit along with accessories will be measured as one run.

Material and labour for concealed sub main wiring with four run single core 6 Sq mm and one run of 6 Sq mm as earth continuity conductor 1100 V grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS-694) drawn through and including PVC conduit ISI marked including connected accessories such bend support etc led in wall/roof/ floor including cutting chasing if reqd etc complete all as specified and as directed. Note :-04 runs 6 Sq mm for phase and neutral and 01 run 6 Sqmm for earth and one run of PVC conduit along with accessories will be measured as one run.

Material and labour for concealed sub main wiring with four run single core 10 Sq mm and one run of 10 Sq mm as earth continuity conductor 1100 V grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS-694) drawn through and including PVC conduit ISI marked including connected accessories such bend support etc led in wall/roof/ floor including cutting chasing if reqd etc complete all as specified and as directed. Note :-04 runs 10 Sqmm for phase and neutral and 01 run 10 Sqmm for earth and one run of PVC conduit along with accessories will be measured as one run.

Supply and fix Decorative Ultra Slim linear LED tube light fitting with extruded Polycarbonate environmental friendly energy efficient of capacity 20W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Refixing existing serviceable LED tube light fitting with extruded Polycarbonate environmental friendly energy efficient of capacity 20W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size after cleaning all dust etc complete all as specified and as directed.

Supply and fix Decorative Ultra Slim linear LED tube light fitting with extruded Polycarbonate environmental friendly energy efficient of capacity 10 W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fix energy efficient recess /ceiling/surface mounted LED luminari suitable for 2'x2' grid with profiled diffuser including lamp, electronic control driver 40 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed.

Supply and fixing 15 W LED recess/surface type decorative ultra slim square lighting fixture suitable for 1'x1' grid with co extruded polycarbonate body, environmental friendly, energy efficient and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed.

Supply and fixing 15 W LED recess/surface type decorative ultra slim round lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed.

Supply and fix energy efficient mirror wall light white LED luminari consist with one light with cylindrical opal glass E14 LED 4.5Watts , AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed.

Supply and fix energy efficient focus/flood light white LED luminari consist one light with cylindrical opal glass E14 LED 50 Watt, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed.

Supply and fix energy efficient track light WH/WW LED luminari 20 watts with wall/ roof mounted track channel of suitable size, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed.

Supply and fix energy efficient decorative wall light white LED luminari consist of 2 light with frosted glass with chrome finish E27 LED 7X2 watt , AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed.

Supply and fix LED building security light fittings 60 Watt with light sensor pressure dia cast housing with epoxy power coated dark graphite grey colour finish, polycarbonate cover with individual LED lenses with IP 65 protection with 5 KV SPD fixed in switch box complete all as directed for fixing in front /backside of building complete all as specified and as directed.

Supply and Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB DP 20 Amps with accessories complete al las specified and as directed.

Supply and Fix bracket made of GI material of GI pipe light grade of size 32 mm dia and 50 CM long including two no of GI clamp fixed on wall with GI flash nut of suitable size complete all as specified and as directed.

Supply and fix LED bulb 0.5 Watt Red and Green colour fixed within enclosure complete all as specified and as directed.

Supply and fix ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with silent brushless direct current copper motor complete all as specified and as directed. (Note:- Old unserviceable ceiling fan shall be deposited to MES store yard.)

Supply and fix Exhaust Fan of size 300 mm sweep, 1400 rpm, 240V with louvers, double ball bearing. silent operation, steel body and blades with fixing arrangements complete all as specified and as directed. ( Note:- Old unserviceable Exhaust fan shall be deposited to MES store yard.)

Supply and fix wall mounted fan 400 mm sweep completed fixed to wall with nut bolts etc 3 core cable from connected to ceiling rose complete all as specified and as directed. ( Note:- Old unserviceable Wall Mounted Fan shall be deposited to mes store yard.)

Supply and Fix Rigid non-metallic PVC conduit of size 25mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, including cutting chasing etc including taking down old all as specified and directed.

Supply and Fix Rigid non-metallic PVC trunking of size 100X50 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old all as specified and complete all as directed. Make- Legrand / ABB /Schneider

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth all as specified and directed.

Supply and fix in repair MCCB DB VTPN 8 way IP-43 made of sheet steel phos phatised, powder painted with bus bar, neutral link, earth bar and Din rail, 415 Volts with double door with MCCB incomer and MCB outgoing complete all as specified and as directed. Note : MCCB and MCB shall be measured and paid separately. Note: Concealed of MCCB DB & make good is inclusive of quoted rates.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and as directed.

Supply and fix MCB SP 6-32A 10KA, 'C' curve complete all as specified and as directed.

Supply and fix MCB SPN 32-63A 10KA, 'C' curve complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB 6 way triple pole and neutral 415 volts, IP 54 , factory made double door flush type complete all as specified and as directed.

Supply and fix Sheet steel factory made double door, powder coated MCB DB with bus bar 200Amps, Neutral link, Earth bar, double door type SPN 8 Way 220 Volt, IP 54 , MCB as a Incomer complete all as directed. Note: Concealed of MCCB DB & make good is inclusive of quoted rates.

Supply and fix Sheet steel factory made double door, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door type SPN 12 Way 220 Volt, MCB as a Incomer complete all as directed.

Supply and fix 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36 KA complete all as specified and as directed.

Supply and fix MCB TPN 63 Amp 440 Volts complete all as specified and as directed.

Supply and fix on load change over switch 125 Amps 4 pole 415 volts 50 Hz with SS Enclosure front operated including taking down unserviceable one complete all as specified and directed.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 4 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with steel round bar 8 mm RCC 1:1.5:3 cover slab of size 450x 450 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge.

Supply and fix Modular Telephone socket RJ11 with shutter 1 module complete all as directed.

Supply and fix Modular data socket RJ 45 cat6 UTP with shutter 1 module complete all as directed.

Supply and fix TV Socket 1 module complete all as directed.

Supply and fix PVC Telephone box 14 way complete all as directed.

Material and labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983, complete all as specified and directed. Note :- (i) Excavated approved soil shall be ribbed by using sieve to separate composite particles etc. as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness shall be considered for payment.

Supply and lay Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified and as directed.

Supply and lay GI pipe light grade 50mm dia bore with all fittings and fixed complete to wall, to pole or laid in trenches and road crossing complete all as specified and directed.

Material and labour for Cutting existing road/PCC/Drain for laying of GI or any type of pipe including necessary earth work, excavation exc 600mm depth but not exc 1mtr depth, 800 mm wide including making good existing surface with 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed. Note :- The tenderer shall take into consideration for following points while quoting rate for this item and the unit rate is deemed to be inclusive for :- (i) Earth work and excavation in any type of soil (ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick ,complete all as specified and as directed. (iii) Removing excavated material to out side MD land. (iv) Laying of any type/any bore of pipe in trenches including taking down. Supply of pipe shall be measured and paid separately (v) 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in road to make good existing disturbed surfaces.

RAMYA CONSTRUCTIONS (BID ID -3428748)

chowdeshwariconstructionco (BID ID -3428739)

Moulya Builders (BID ID -3428735)

K T ASSOCIATES (BID ID -3429242)

devan enterprises (BID ID -3428213)

RAMESH BABU CO (BID ID -3428025)

M/S SRI BALAJI ENTERPRISES (BID ID -3428619)

RMK PROJECTS (BID ID -3429165)

shashi shekar construction (BID ID -3427529)