Work 1 PROVIDING, SUPPLYING AND COMISSIONING OF REVERSE OSMOSIS SYSTEM 1000 LITRE PER HOUR WITH SHED Work 2 SHED FOR REVERSE OSMOSIS SYSTEM 1000 LITRE PER HOUR CAPACITY PLANT

Work Location 1 :- Providing, supplying and commissioning of 1000 LPH REVERSE OSMOSIS system with Drinking Water Automatic Dispensing Machine With One Years Warantity 1) Raw Water Tank 2000Ltr HDPE , IS:12701 2) Raw Water Pump 1.0HP Kirloskar /Crompton/CRI/ Lubi 3) Pressure Sand Filter (13 X 54 Inch) 4) Active Carbon Filter (13 X 54 Inch) 5) Micron Cartridge Filter 02 Nos(20inch x 4inch Big Jumbo) 6) Antiscalent Dosing System Dosing Capacity 6LPH 7) High Pressure Pump 1.5 HP CRI/Leo/Lubi/ Shakti) 8) Chasis S.S. Grid Chassis. 9) Membranes 40-40 X 4 Nos Capacity 1000 Lit/Hour 10) Instrumentation And Electrical Components Pressure Gauge-2 Nos Rotameter- 2400 – 1 Nos. Electronic Control Panel 11) Piping. UPVC Pipe 12) UV Disinfection Unit Fluorescent Tube Type 13) Pure Water Storage Tank 2000 Lit.Stainles Steel. Grade. 14) Dispense Unit (ATM) Aster / Proton

Shed For RO Plant :- Providing and laying in situ cement concrete in M.10 of trap metal for foundation and bedding including bailing outwait formwork compacting and curing with natural sand etc complete.

Providing and fixing rolling shutter fabricated from steellaths of minimum thickness 0.9 mm with lockplate of 3.15mm thickness reinforced with 35x3x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspensions haft of minimum 32 mm diameter, hood cover of M.S.sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear weels and worms of high grade cast iron or mild steel and one coat of red lead primer etc.complete. (I.S. 62481979) (Without mechanical gear)

Electrification for RO :- Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Supplying, erecting & marking DPMCB 6A to 32A,C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board

Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW

Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light).

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Add 18% GST (Total Excluding Royalty Charges of Sand Murum & other Material)