PROVN OF STORAGE SHED, BATHROOM AND CGI PARTITION NEAR BLDG NO KND - 29 AND MTO OFFICE CUM STORAGE NEAR BLDG NO KND - 104 AT JUTOGH CANTT UNDER GE (I) JUTOGH

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/ loose soil, complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out in hard dense soil, complete all as specified and directed.

Returning, filling in, of hard/dense soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete all as specified and directed.

Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point in soils, complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 as in flooring finished evev and smooth with extra cement complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed.

M&L for rendering/ screed bed 15mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar (1:6) finished with even and smooth complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed.

M&L for two coats of distemper oil emulsion on wall incl preparation of new surfaces over one coat of primer on wall surface, complete all as specified and directed.

M&L for prepartion of new plastered surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for broken brick/stone or boulders for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete including sub base of floors and floor finishing, complete all as specified and directed.

S&F rolled structural steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates etc, structural steel confirming to Fe-410w, Gde 250, quality- 'A' complete all as specified and directed.

S&F CGI sheeting 0.63mm thick with grade of zinc coating 120 gm per sqm as in roof covering fixed with L or J type hooks or self thread making steel screws of length not less than 75mm, with suitable arangement as required, complete all as specified and directed.

S & F plain galvanised, mild steel sheeting 0.63mm thick with grade of zinc coating 120 gm per sqm as in ridges, hips, valley gutters, drip and straight flashings, fixed with L or J type hooks or self thread making steel screws of length not less than 75mm, with suitable arangement as required, complete all as specified and directed.

M&L for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

S&F IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F mild steel framed work as in grills,guard bars etc. with ends of bars shouldered/welded and/or riveted and other simillar works confirming to Fe410-0 or Fe310-0, complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete all as specified and directed.

S& F 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed.

S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm fixed nominal dai of wire and avrg widh of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm brass CP wall mixer for mixing hot and cold water with hand shower, complete all as specified and directed.

S&F 60cm long sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm wide with chromium plated bracket guard and railing, complete all as specified and directed.

S&F 15mm brass CP wash hand basin mixer for mixing hot and cold water complete all as specified and directed.

S&F 15 mm dia Angle/ stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long, complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 150mm long, complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size, complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F soap dish chromium plated of size 180x160x90mm any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate, laid in 1:20 slope as in plinth protection, coping, surface finished even and smooth without using extra cement, with and incl use and waste of necessary form work complete all as specified and directed.

S&F 15 mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.

S&F in repair 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F Wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC SWR Bends in any radius 75 mm bore with access door, complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs capacity water storage tanks (cylindrical vertical with closed top) three layer, ISI marked hoisted and fixed in position including 20mm dia float valve and dismentling of existing tank, as specified in SSR Part-I complete all as specified and directed.

M&L for preparation of new or previourly untreated surface of wood or board materials of any description not otherwise described over 10cm in or girth & appyling two coats of synthetic enamal paint over a coat of pink primer, complete all as specified and directed.

M&L for mild steel TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT Bars 8 mm dia cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note: i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

M&L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note: - Water proofing compound will be measured and paid separately.

M&L for rubber moulded Pre polished lacquer finish chequered cement concrete tiles 300 x 300 x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over Screed bed or bedding layer of mortar as in 1:6 15 mm thick for laying floor finishes, complete all as specified and directed.

M&L for precast reinforced concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in lintel beam, cover slabs set in cement concrete 1:4 placed in position over manholes etc including use and waste of necessary formwork, complete all as specified and directed.

S&F 30mm flush shutters, solid core construction, with block board core and plywood face panells, commercial types on both sides incl teak wood beading alround the shutters complete all as specified and directed.

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters factory made open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a), complete all as specified and directed.

M&L for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement, complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinaly quality and glazing with oil putty or secured with wdn beads as required in square n exc 0.5 sqm in each pane, complete all as specified and directed.

S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 300mm mild steel ordinary rate tail rod pattern door spring incl roller and roller plate, complete all as specified and directed.

M&L for mild Steel works as in bends straps, hold fasts etc, conforming to IS-206202006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed.

M&L for PCC 1:2:4, type B1, using 20mm grades crushed stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250), quality-A, etc., complete all as specified and directed.

M&L for MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes chequir plate Fe 410-W(Gde-E- 250), quality-A, channels in purline, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (incl rivet or nut and bolts) providing and fitting angle cleats Gussete plates etc also for wedging plumbing, truing up and fixing complete all as specified and directed.

S&F Mild steel plain black sheet 0.80mm thick in hearths, covering to door shutter, ducts, etc, cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, etc. as required, complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregade as in surface channel/ drains incl fair finises & necessary formwork, complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps, bend, socket & collar as required, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed size 1.5 sqmm with PVC concealed with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed.

All as per Srl item No 70.00 above but for one 3/5 pin socket 5 Amp on independent board, complete all as specified and directed.

All as per Srl item No 70.00 above but for 3 pins socket outlet 15A independent with 2.5 sq mm wire and 2.5 sqmm earth wire complete all as specified and directed.

S&F Modular switch, 5/6 Amps, one way one module white colour, complete all as specified and directed.

All as per Srl item No 73.00 above but for Modular 15/16 A, complete all as specified and directed.

S&F Modular socket 5/6Amp, 2/3 pin, combined, 2 module, white colour, complete all as specified and directed.

All as per Srl item No 75.00 above but for modular 6A/16 Amp white colour, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for 2 module, complete all as specified and directed.

All as per Srl item No. 77.00 above but for 3 module, complete all as specified and directed.

All as per Srl item No. 77.00 above but for 4 module, complete all as specified and directed.

S&F ceiling rose, PVC/ Polycarbonate isolated body, surface backlite, 65x50mm three terminals, complete all as specified and directed.

S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with 3core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED Bulbs 9/10Watt, B-22, Pin type complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for LED lamp, complete all as specified and directed.

S&F Distribution board (DB's) 8 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCBs 240 V, 50 Hz , complete all as specified and directed.

S&F SPN 6-32 amp rating 240V, 10KA miniature circuit breaker (MCB) of poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

All as per Srl item No 85.00 above but for MCB SP 6-32A, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm, 2 core, complete all as specified and directed.

Supply, fixing or laying HDPE (DWC) tubing 25 mm dia as per IS:16205 part 24 fixing on poles, walls under floors, laying on surface etc as reqd at site complete all as specified and directed. Note: All items and accessories , bend, joints, nut bolts, clamps for wall fixing as per site requirement etc are incl in quoted rates.

S&F Distribution board (DB's) 2 way SPN double door with 200Amps busbar, Neutral link, having sheet metal enclosures for suitable for MCBs 240 V, 50 Hz, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 sqmm, 2 core, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed size 1.5 sqmm with PVC casing caping with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed.

S&F switch piano flush type, 5 Amps, single pole one way, complete all as specified and directed.

M/S Jaswant Kumar Aggarwal

M/S Meera Builders

NSK TRADER