PROVN OF TRG SHED BLDG NO P 08 AT ZONE 06 AT 6MECH PROVN OF SENTRY POST GUARD ROOM AND ATT TOILETS BATH ROOM NEAR URC OF 54 ARMD REGT AT ZONE 03 PROVN OF GUARD ROOM WITH TOILETS AT 82 AMN AND CERTAIN SANC WORKS UNDER AGE B R I AT BABINA

Amount

M&L, 75mm thick PCC 1:2:4 type B-0 (Using 12.50mm graded BT stone aggregate) as in floors, finished even and fair without using extra cement, laid in alternate panels complete all as specified and directed

M&L, steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS - 1161-1979 grade St.-240 complete all as specified and as directed.

M&L, Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L, Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm but n.exc 30cm long complete all as specified and directed.

M&L, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F, painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F, painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Excavating in trenches not exc 1.5 m wide and not exc 1.5 deep and getting out in soft/ loose soil.

Suface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L Cement concrete type D2 (1:4:8) (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Use and waste of formwork to sides of concrete, in foundations, footings, columns & beams, etc in flat for rough finshed surfaces of concrete complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers column and stanchions for rough finish surfaces of concrete complete all as specified and directed.

Use and waste of form work to beams, lintel band/beam, shelves rough finish surfaces of concrete complete all as specified and directed.

Use and waste of formwork to soffits of roof slab and chajjas etc thickness not exc 200mm thick complete all as specified and directed.

Use and waste of form work to edges of concrete in roof, chajja etc exc 10cm and n.exc 20cm wide complete all as specified and directed.

M&L mild steel deformed bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel deformed bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel deformed bars 5mm dia & over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. (reinforcement to be measured separately).

M&L RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete all as specified and directed. (reinforcement to be measured separately).

M&L RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) in roof beams, cantilevers,lintels etc complete all as specified and directed.

M&L, RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns complete all as specified and directed. (reinforcement to be measured separately).

M&L, RCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in chajjas complete all as specified and directed.

M&L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4, in half brick walls complete all as specified and directed.

M&L rendering 15 mm thick on faces of brick work/ concrete surfaces in cement mortar (1:4) finished even and fair complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar 1: 3 on celing / soffits of chajjas etc finished even and smooth without using extra cement complete all as specified and directed.

Extra over plaster as in drip moulds n.exc 15 cm width or girth

M&L rendering 15 mm thick on concrete surface of roof (top) in cement mortar 1: 4 mixed with WPC finished even and smooth without using extra cement complete when concrete is green complete all as specified and directed. Note : WPC will be paid as supply only under relevant item.

Supply only integrated water proofing compound complete all as specified and directed.

M&L applying water proofing treatment with the following:- (a) First coat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application complete all as specified

M&L moorum/Red Bajri filling in floors and pavings laid in layers n.exc 15cm thick, spread, levelled, watered and well rammed complete all as specified and directed.

M&L, for PCC 1:2:4 type B-0 (using 12.5 mm gradesd stone aggregate) as in levelling course of floors of 25 mm thick complete all as specified and directed.

M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed.

M&L, Jont free coloured vitrified tiles tile 10 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, Jont free coloured vitrified tiles tile 10 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, Jont free coloured non skid ceramic tile 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat Cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, Rendering 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished rough to receive tiles etc complete all as specified and directed.

M&L, Jont free Glazed ceramic dark/light coloured tiles 300mm x 450mm and 7 to 8 mm thick, in skirting, dados(incl border on top) , risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles dark/light patern complete all as specified and directed.

M&L, broken stone or boulders, hard core of gauge n.exc 63 mm, deposited, spread and levelled, watered and rammed to a true surface in layers not exceeding 25 cm each complete all as specified and directed.

M&L PCC 1:3:6 type C2, 75 mm thick (using 40 mm graded stone aggregate) finished even and fair as in plinth protection including forming of joints 03mtr and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S& F Gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium road and high density platic ball screwed for iron pipe and fixed complete all as specified and directed.

S & F Vitreous China Squatting pan orrissa patteren size 580x440mm white with integral foot rest with S or P trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete all as Specified.

S&F PVC valve less, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including bracket and including taking down existing flushing cistern any description.

S&F vitreous china urinal bowl type of min size 465x355x265mm(excluding flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and outgoing pipes complete all as specified and directed.

S&F wash hand basin vitreous china (flat back) including cutting for and pinning in ends and CI brackets complete size (550 x 400mm ) complete all as specified and directed.

Supply only brass chromium plated waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

Supply only pillar taps 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold" complete all as specified and directed.

Supply only PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.

S&F Sheet glass assembly consisting of 5.5 mm thick sheet glass sheet of 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Bib taps, cast copper alloy chromium plated with crutch or butterfly handle (Long body), screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.

S&F Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore complete all as specified and directed.

S&F Chromium plated shower roses with or without swivel joints 125mm size complete all as specified and directed.

S&F corner shelf of 30cm radius using 15mm thick marble slab complete all as specified and directed.

S&F PVC (SWR) Floor trap plain with grating including jointing with solvent cement and fixed in repair 75 mm dia outlet complete all as specified.

M&L for Salt-glazed stoneware gully traps of size 150x150mm square, type 'P' complete all as specified and directed.

M&L for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore complete all as specified and directed.

M&L for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete all as specified and directed.

M&L for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

PVC (SWR) junction single (single T), equal or unequal, 110mm bore, provided with access door complete all as specified and directed.

PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, provided with access door complete all as specified and directed.

PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

S&F, tubing medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 15 mm including concealing of tubes where ever directed and required complete all as specified and directed.

S&F, tubing medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 20 mm including concealing of tubes where ever directed and required complete all as specified and directed.

M & L Salt-glazed stoneware drain pipes 150mm internall dia laid in trenchs and jointed all as specified

M & L concrete bed in PCC 1:4:8 type D2 (using 40mm graded stone aggregate) to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they laid.

M&L PCC 1:3:6 type C1, (using 20 mm graded stone aggregate) as in bed block for holdfast copings all as specified

S&F 2nd class HW plain, solid straight chowkat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints.

S&F, 35mm thick factory made plain, framed, panelled shutter (two panel) with lock rail and 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Pt-I) Kiln seasoned and chemicallhy pressure treated complete all as specified and directed.

S&F, 35mm thick factory made plain, framed, glazed & skelton shutter 1st class hard wood, open rebated and prepared to receve glass, gauze etc( without sash bars ) The size of rail and stile as per IS-1003 (Pt-I) Kiln seasoned and chemicallhy pressure treated complete all as specified and directed.

S&F, 30 mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (without sash barss) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for security guages.Size of frames as specified in Cl-8.23(b) of SSR Pt-I complete all as specified and directed.

M&L mild steel band, strap, hold fast,s clamps or similar small articles confirming to Fe 410 or Fe 310-0) all as specified

Mild steel barrel tower bolts stove enamelled black with bright bolt and fixed 200mm size

S&F butt hinges medium weightcold rolled mild steel 100mm size all as spd

S&F 150mm size mild steel pressed handle oval type stove enamelled black all as spd

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutters 300mm long all as spd

Preparation of wood surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink primer.

Preparing new surfaces of wood and wood based materials of any description and girth and treated with tar or coal tar black paint to back of chowkhats etc area tarred exc 0.10sqm and n exc 0.50 sqm each all as directed.

Ditto as item 83 above but In small article such as hold fast n exc 0.10 Sqm each treated with or coal tar black paint.

Supplying & fixing 30 mm thick Factory made solid Panel Prelam PVC internal door shutter consisting of frame made out of MS tube of 19 guage thickness & size of 40x20 mm for stiles, top,lock & bottem Rails MS frame shall have a coat of steel primers of approved make & manufacture MS frame shall be covered with 5 mm thick prelam heat moulded PVC C channel of size 30x100 mm forming stiles and 5 mm thick prelam 125 mm wide pvc sheet for top rail lock rail & botte rail on either side of pannel and 15 mm thick 20 mm wide cross PVC sheet as gap insert for top & bottem Rail. Panelling of 10 mm prelam pvc sheet to be fitted in th ms frame welded/sealed to the stiles & rails with 30 mm wide x 5 mm thick Prelam PVC sheet bedding on either side and additional 30 mm wide PVC bedding as gap insert below top and bottem rail jointed together using solvent cement adhesive . An additional 5 mm thick prelam PVC strip of 20 mm width is to be stuck on the interior side of the C channel using PVC solvent cement adhesive etc. complete all as specified and as directed by the Engineer-in-Charge

Providing & fixing Factory made PVC internal door Frame the size 100x45 mm With a wall thickness of 5 mm, made out of extruded 5 mm thick pvc sheet of Density 600 kgs/Cbm Manufactured by ISO - 9000 certified company mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS squre tube. the two vertical door frames are to be reinforced with 40 mm x20 mm MS tube of 19 guage through out the frame. the door frame shall be fixed to the wall using 65/100 mm long MS screw through the frame by using anchor fastners . A minimum of 4 nos. of screw to be provided for each vertical member etc. complete all as specified and as directed by the Engineer-in-Charge

S&F aluminimum anodised barrel tower bolts of extuded section of size 150 mm.

S&F aluminum handles fabricated type anodised of 150 mm all as spd

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised 100mm size all as spd

S&F steel ventilators with partly top hung shutter and partly fixed type including hinges, steel peg stay complete.

S&F framed work such as grills gratings etc and similar works conforming to Fe 410-0 complete all as spd and directed

Supply only 3mm thick sheet glass ordinary quality in square n exc 0.5 sqm each pane in new glazed shutter all as spd

Supply only 3mm thick figured glass pin head type in square n exc 0.5 sqm each pane in new glazed shutter all as specified.

Supply galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F brass CP tubular towel rail 20mm dia `D' type 60cm long between flanges complete all as specified and directed.

S & F floor door stopper aluminium body and tongue, 140 mm complete all as specified and directed.

S&F aluminium peg set of three ,solid body 175 mm to 250 mm complete all as specified and directed.

M&L, two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

Preparation of new steel surfaces over 10cm width or girth and applying 02 coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed.

M&L,preparing newly palstered surface of wall and applying two coat of cement base paint white or tinted over & including a coat of JK/Birla cement putty on prepared surfaces of walls complete all as specified and directed.

M&L,preparing newly palstered surface of wall and applying two coats of oil emulsion distemper over two layer of JK/Birla cement putty complete all as specified and as directed

M&L Preparing new surfaces of ceiling and applying three coats of white wash all as specified and directed.

S&F, Aluminium powder coated rod 25 mm ext. dia for curtain rod complete all as specified and directed.

S&F, knob for drapery rod complete all as specified and directed.

S&F, Aluminium powder coated brackets for drapery rod complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed.

Removing excavated material n exc. 50mm and depositing where directed at alevel n exc 1.5mm above the starting point complete all as specified and directed.

Surface dressing n.exc 15 cm thicknes in hard and hard and dense soil complete all as specified and directed

Excavating in trenches in hard and dense soil , not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete.

M&L Brickwork with Fly Ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in complete all as specified and directed.

M&L for form work to chullah, chajjas, troughs and similar items including edges, fair finished complete all as specified.

M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in chajjas complete (reinforcement to be measured separately).

M&L for providing precast cement concrete type B-1,1:2:4 (20mm graded aggregate) as in cover slabs ,shelves and similar articles all as specified ,set in cement mortar 1:6

M&L for rendering 15 mm thick cement plaster 1:6 on brick surfaces other than fair face finished fair and even complete all as specified.

M&L for rendering 5 mm thick cement plaster in cm 1:3 on ceiling Finishing the surfaces fair and even complete all as specified.

M&L for preparation of new plastered surfaces on walls and apply two coats of OBD over a coat of Clearcolle all as specified.

M&L for Preparing old decorated plastered or unplastered surfaces of ceiling and applying two coats of white wash complete.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash complete.

M&L hard core of guage n.exc 63mm of broken stone or bolder, deposited, spread and leveled in layers n exc. 15cm thick watered and rammed to a true surface.

M&L for cement concrete 75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base.

M&L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M&L for cement concrete flooring, 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate) finished even and rough to receive tiles Complete all as specified

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified

M & L vitreous china wash basin white flat back size 630x450 mm including brackets,cutting for and pinning in ends of brackets, connection to supply and waste pipe.

Supply and fix cast iron nahani trap100mm dia including grating, jointing to waste pipe complete all as specified.

Supply and fix only pillar tap cast capper alloy with capstan head, chromium plated screwed iron pipe 15 mm dia complete as specified

Supply and fixing cast copper bib taps 15 mm bore dia, fancy type chromium plated with crutch or butterfly handles, screwed down, suitable for 15 mm bore GI pipe as specified.

Supply and fixing Angular stop cock 15 mm bore dia cast copper alloy fancy type, chromium plated with capstan head screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes all as specified.

Supplyand fixing 32 mm dia waste fitting brass chromium plated for wash hand basin with long screwed sharks and fly nuts flange and embedded in red lead cement and other end fixed all as specified.

Supply and fixing tubular towel rail chromium plated 20 mm dia D type 60 cms long all as specified.

M&L for stop cock 20 mm bore dia cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or for union all as specified.

M&L for galvanized steel water tubing 15 mm bore medium grade including all fitting all as specified.

M&L for galvanized steel water tubing 20 mmbore with all fitting medium grade as specified.

M&L for galvanized steel water tubing 25 mm bore with all fitting medium grade as specified.

PVC connection suitable for 15 mm bore GI pipe, 450 mm long of pressure rating 6 kg/sq cms fixed complete including one GI unions at each end complete all as specified.

M&L for cast iron soil waste and vent pipes (spun pipes) in any length with or with out ears with cement joints fixed to wall 100 mm bore dia complete all as specified.

Supplied and fixed cast iron bends 100 mm bore dia, diminishing pieces fitted with oval excess door all as specified.

S&F cast iron cowls 100mm bore of pipe as specified

M&L 1000 ltrs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply and fixing ball brass valves 20 mm bore high pressure with polythene float and fly nut complete screwed iron pipe or brass ferrule as specified.

Supplied and fix 40 mm thick 1st class hardwood plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered plywood commercial type 9 mm thick complete all as specified.

M&L IInd class hard wood 35 mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members as speciifed in SSR Part I, Section-8, clause 8.20(a), supplied and fitted to chowkhats.

Framed work of rolled mild steel conforming to Gde Fe 410-0 or Fe 310-0 as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete.

Suppy and fix butt hinges, extruded aluminium alloy with galvanized mild steel hinge bin, anodized and fixed type C-22 100mm size as specified.

Suppy and fix 100 mm size extruded aluminium alloy handles, fabricated type anodized as specified.

Suppy and fix 200 mm size aluminium anodized barrel tower bolt of extruded section all as specified.

Suppy and fix aluminium alloy, anodized sliding door bolt with hasp and staple bolt type and fixing clips of sheets, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, length 300 mm as specified.

Material and labour for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floors, length of cover plate 150 all as specified.

300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new woodenl surfaces of any description over 10 cms in width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L Steel windows or ventilators, fixed type, with glazing bars complete.

M&L Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars complete.

M&L Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, without glazing bars complete.

M&L Mild steel bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, conforming to Fe-410-0 or Fe 310-0 complete.

M&L Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete.

M&L Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L 100mm internal dia salt glazed stoneware drain pipe laid in trenches and jointed in neat cement slurry complete all as specified

M&L 150mm internal dia salt glazed stoneware drain pipe laid in trenches and jointed in neat cement slurry complete all as specified

M&L for concrete bed to drain pipe (100 mm dia) in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipe after they are laid and tested all as specified.

M&L for concrete bed to drain pipe in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipe after they are laid and tested all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top &bottom rails. MS framed shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for tap rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement supplied & fixing in the frame at site as per Specified &drawing.

M&L for PCC type B2 1:2:4 type B1 (20mm graded aggregate) as surface channels and drain.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement , includng forms, moulds mitred/stopped ends etc.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces rendering surfaces to be finished even and smooth(without using extra cement)

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Cement concrete 1:4:8 type B2 (using 40mm graded stone aggregate) in floors and paving, 75mm thick, laid in panels as in Sub base complete all as specified and directed.

S&F, vitreous china wash basin white, flat back size 630x450mm including one pillar cock chromium plated 15mm bore, brackets of MS angle 25x3mm waste pipe 32mm, CP coupling etc complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).

S & F plastic water closet seat and cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S&F PVC (SWR) Gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F, (SWR) vent cowl 75mm complete all as specified and directed.

S&F, in repair stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle chromium plated angular type screwed both ends for iron pipe 15 mm bore or for unions and fixed.

S&F PVC SWR pipe 100mm bore in any length with rubber ring joint laid in floor and wall with necessary clamp complete all as specified and directed

S&F, Aluminum handles cast type anodised 150mm complete all as specified and directed.

M&L Preparing new surfaces of wall and applying two coats of cement base paint over Chalk whiting, on plastered surfaces, preparatory to distemperingcomplete all as specified and directed.

M&L Preparing new surfaces of wall and applying three coats of white wash complete all as specified and directed.

S & F false ceiling with 9-9.5 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film (Make:Polyshield-P (Plain) of M/S SaintGobain Gyproc India Ltd / Daiken gypsum tile of M/S Lucky Global Corporation Co. Ltd) of size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300 gm per RM with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed by the Engineer-in-Charge

M&L for 7.5 cm thick Sand stone slabs in landings n exc. 2m in length,punched dressed on face and along exposed edges,self faced on other side and set and pointed in cement mortar 1:4. complete

M&L for 20-25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete.

S&F, in repair CP flushing jet spray for pedestal pattern WC including flexible pipe and brass CP nuts complete all as specified and directed.

M&L rendering 15 mm thick on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth complete all as specified and directed.

M & L for complete removal of existing treatment from wall and coping and applying two coat of oil bound distemper over one coat of JK/Birla wall care putty including prepration of surface etc complete all as specified and as directed by the Engineer-in-Charge

M&L,preparing newly palstered surface of wall and applying two coat of cement base paint white or tinted over & including a coat of white cement on prepared surfaces of walls complete all as specified and directed.

M&L PCC 1:3:6 type C-1 ( using 20mm graded stone aggregate) in foundation, filling and mass concrete.

M&L, for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water trough and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M/L for rendering 15mm thick in CM 1:6 on fair faces of bricks or concrete surfaces finished fair and even all as specified.

M & L preparation of walls newly plastered surfaces & applying three coats of white wash.

M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :- (a) One light point controlled by one switch

(b) one fan point controlled by one switch & regulator.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

(d) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 197 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

M & L for surface type condute wiring point wiring complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :- (a) One light point controlled by one switch

(b) one fan point controlled by one switch & regulator.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

(d) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 208 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed Flame retardent(FR) 2 single core cable 1100 volts grade with copper conductor of size 10.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured separately.

S & F Regid non-metallic PVC conduit not less than 19 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar SPN, 8 ways 240 V complete all as specified and as directed.

S&F MCB SPN 6 to 40 Amps 240 V,10KA, 'D' series,complete all as specified and as directed with copper lugs

S&F MCB single pole 6 to 40 Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs

S&F ceiling fan 1200 mm sweep BEE 5 star rated complete AC single phase 230 volts with electronic type regulator and connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable lenght from ceiling rose complete all necessary arangement of hanging of ceiling fan (GI Pipe hook etc ) as specified and as directed.. Make Havells cat part: Fusion 50 orequivelent of C.G, Bajaj, USHA,ORENT

Supply and fixing in repair 18/20 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 20 watts lamp fitted including wiring upto and terminal into existing ceiling rose complete all as specified and directed by Engr-in- Charge , Make havells cat part No HavellsENDURALINEARNEOBS20WLED865SPCWH 020 or equivelent in philips/bajaj /CG.

S&F LED security/ street light fitting 1 X24 W LED 6000K energy saving & environmental freindly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed. Make: – Havells Cat No LHETAXU7PA6S025 OR equivalent of Philips/Bajaj.

S&F light fitting 1 x 10 watt bulkhead luminaries with LED 10 Watts, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make: (Havells Cat NoRUGBYNEOFT10WLED760SSYMBOPC or Equivalent in C.G, Bajaj, Philips or Surya)

S & F LED bulb1x9 watt having PF not less than 0.90 suitable for holder fittings complete all as specified and directed (Make : Philips/Surya/Bajaj/Crompton greaves).

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm GI suspension wire one twin core cable flat or circular of size 10 Sq mm to be connected to existing MCB box / Main switches complete all as specified as dircted.

S & F House service bracket (hook type) complete with 3.0 mtr long GI pipe 40mm dia medium grade 2 numbers 90 degree bands MS hook and stay & guy complete all as specified and directed.

Supply ,laying and testing cable XLPE insulated screened PVC bedded ,galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 10 sqmm 4 core complete all as spd and directed.

Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed .

Returning filling in soil, including spreading levelling watering and well ramming in layers n.exc 25 cm complete all as directed

Removing excavated soils to a distance n.exc. 50 mtrs and depsiting where directed at a level n.exc. 1.5 above the starting point complee all as specified and directed

supply laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.

M&L for brick protection covers over cables of sub class 'B' bricks old size , laid dry over cables (length of bricks shall be laid across the length of the cable complete all as specified and directed

M&L pipe galvanised iron pipe 32mm bore, light grade ISI marked, complete with fittings laid inj trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2010 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

G.R.associates

m/s krishan kumar

Shri Balaji Associates