REPAIR, MAINT AND RENEWALS TO VARIOUS AC/CI/DI WATER SUPPLY PIPE LINES, SLUICE VALVES AND CONNECTED WORKS IN ZONE A AND B AT JHANSI CANTT UNDER AGE E/M AT GE JHANSI

Amount

Taking up old UNSV CI/DI pipe incl all fittings with spigot and socket ends and lead joint of size 80mm bore complete all as specified and directed. Note : The excavation & earthwork shall be measured & paid for separately.

All as per Item No. 1.00 here-in-before but of size 100mm bore.

All as per Item No. 1.00 here-in-before but of size 150mm bore.

All as per Item No. 1.00 here-in-before but of size 200mm bore.

All as per Item No. 1.00 here-in-before but of size 250mm bore.

All as per Item No. 1.00 here-in-before but of size 300mm bore.

All as per Item No. 1.00 here-in-before but of size 400mm bore.

Supply, laying and testing of Ductile iron pipe (Conforming to IS: 8329-2000) (Reaffirmed-2005 Edition 4.1) , Centrifugally Cast (Spun) Pressure Pipe with Socket and Spigot ends suitable for "Push-on-Joint" in standard working lengths supplied with & incl EPDM rubber gasket conforming to IS-5382-1985 (reaffirmed -2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quaity for water supply, class K-9 with socket and with cement mortar lining inside the metalic zinc coating with finishing layer of bituminous paint on outside the pipe without polyehlene sleeves but incl jointing material, of size 80mm bore laid in trenches complete all as specified and directed .

All as per Item No. 8.00 here-in-before but of size 100mm bore.

All as per Item No. 8.00 here-in-before but of size 150mm bore.

All as per Item No. 8.00 here-in-before but of size 200mm bore.

All as per Item No. 8.00 here-in-before but of size 250mm bore.

All as per Item No. 8.00 here-in-before but of size 300mm bore.

All as per Item No. 8.00 here-in-before but of size 400mm bore.

Supply and fix in replacement of Cast Iron sluice valve of size 400 mm bore, having pressure rating PN 1.6, double flanged, non-rising stainless steel spindle with iron wheel conforming to IS:14846-2000 with jointing material i.e. new rubber gasket, nuts & bolts, washer etc of suitable size including taking down existing old unserviceable sluice valve complete all as specified and directed. Note : Material will be accepted and allowed to be incorporated in the work only after production of proper purchase voucher from authorized dealer and test certificate from the manufacturer.

All as per item No. 15.00 here-in-before but of size 300 mm bore

All as per item No. 15.00 here-in-before but of size 200 mm bore

All as per item No. 15.00 here-in-before but of size 150mm bore

All as per item No. 15.00 here-in-before but of size 100mm bore

All as per item No. 15.00 here-in-before but of size 80mm bore

Supply and replace Cast Iron Non Return Valve (NRV) 200mm NB with flanged ends swing type / ball type ISI marked including replacement of necessary packing material, bolts, nuts and washers complete all as directed. Note : Material will be accepted and allowed to be incorporated in the work only after production of proper purchase voucher from authorized dealer and test certificate from the manufacturer.

All as per item No. 21.00 here-in-before but of size 150mm bore

All as per item No. 21.00 here-in-before but of size 100mm bore

Supply and replacement Cast Iron foot valve flanged end / screwed end ball type/ swing type ISI marked including replacement of necessary packing material, bolts, nuts and washers of size 200mm bore complete all as directed .

All as per item No. 24.00 here-in-before but of size 150mm bore

All as per item No. 24.00 here-in-before but of size 100mm bore

S&F of DI Mechanical joint (MJ) collar with rubber gasket EPDM, nut, bolts, washers etc complete suitable for CI/DI pipe line of 100mm bore size with and incl all jointing material complete all as specified and directed. Note:- The rate quoted by contractor deemed to be incl necessary earth works.

All as per item No. 27.00 here-in-before but suitable for pipe of size 150mm bore

All as per item No. 27.00 here-in-before but suitable for pipe of size 200mm bore

All as per item No. 27.00 here-in-before but suitable for pipe of size 250mm bore

All as per item No. 27.00 here-in-before but suitable for pipe of size 300mm dia

All as per item No. 27.00 here-in-before but suitable for pipe of size 400mm bore

M&L for GI water tubing, medium grade, ISI marked, with and including all fittings i.e. bend, tee, elbow, reducer, union, nipple etc as per site requirement laid in trenches, complete as specified and directed including taking up or down old steel tubing and connections for the following pipe sizes:- Note : 1. The excavation & earthwork shall be measured & paid for separately. 2. The cost of all type of GI fitting i.e. bend, tee, elbow, reducer, union, nipple etc is deemed to be included in quoted rates.

20mm bore size

25mm bore size

40mm bore size

Supply and fixing MS clamp made out of MS flat 150mm x 5mm with 40/25/20mm dia hole for taking branch connection with and including fixing of 40/25/20mm dia GI socket duly welded complete including fixing of clamp on existing GI pipe line of size 80/100/150mm dia with suitable rubber gasket packing to ensure leak proof joint and suitable nuts, bolts and washers etc complete all as specified and directed by Engr-in-charge.

M&L for brick masonry with sub class B bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6 complete all as specified.

Plain cement concrete, type B-2 ( 1 : 2: 4), (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

M&L cement plaster in cement mortar (1:4) 15mm thick on fair faces of bricks works or concrete surface finished even & smooth using extra cement complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of SS spindle, gun metal check nut (guttka) with using new nuts & bolts for top cover and stuffing box to sluice valve of size 100mm bore complete all as specified.

All as per Item No. 38.00 here-in-before but suitable for sluice valve of size 150mm bore.

All as per Item No. 38.00 here-in-before but suitable for sluice valve of size 200mm bore.

All as per Item No. 38.00 here-in-before but suitable for sluice valve of size 250mm bore.

All as per Item No. 38.00 here-in-before but suitable for sluice valve of size 300mm bore.

M&L for ductile iron fittings suitable for CI/DI pipe of size 80mm to 400mm bore and any type, class K-12, such as Bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces (single branch, "Y" junction, double branch, cross etc), caps and plugs etc, complete all as specified and directed.

Supply, fabricating and fixing of MS clamp, base frame for pumping set/ on OHT cover, supports, bracing, stiffness etc made out of MS channel, MS sheet, angle iron, flat iron of any size including drilling of holes with and including gasket, nuts & bolts with washers etc, as required, including painting with two coats of synthetic enamel paint over a coat of red oxide paint complete all as directed.

M&L for demolition of old unserviceable valve pits of any size and constructing of full brick mesonary pits of internal dimensions 1mtr x1mtr x1.2 mtrs (bottom PCC floor of the pit should be minimum 30 cms below the bottom surface of sluice valve flange to provide sufficient working space), bottom floor of the pit be constructed in PCC (1:3:6) 15 cms thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 MM thick. The sluice valve and other fittings should be housed in center of the pit. the vertices of the pit should in right angle and champhered .The top cover of the pit will be made out of MS sheet min 2mm thick witth angle iron frame made out of MS angle 50mm x 50 mm x 6 mm with MS hindges two nos, and locking arrangements duly painted with two coats of water resistant synthetic enamelled paint over one coat of red oxide, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in hard/dense soil for laying pipes etc, complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/dense soil complete all as directed.

Removing excavated material (Soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as directed.

Ayush Enterprises

ROHIT ENTERPRISES

PARAS BROTHERS

M/s Ravi Traders

N K ENTERPRISES

Soni Traders

M/S Ritu Tandon

SHRI HARI CONSTRUCTION

m/s gupta trading