MMPPNA_23_24_173 (1)Construction of road from NH-37 to Gosanibor (Ch. 0.00m to 3200.00m), (2)Construction of Panbari Tini Ali to 3No. Harimandir Via Bhorali Chuck (Ch. 800.00m to Ch. 2500.00m) under Mukhya Mantrir Pakipath Nirman Achani

Amount

(1)Construction of road from NH-37 to Gosanibor (Ch. 0.00m to 3200.00m) Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. (A) In area of non thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5 (a) Private land

Construction of Sub grade and earthen shoulders with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.2 with a lead up to 1000m as per technical specification clause 303.1 (a) Private land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(ii) For grading-II material,

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405 (A) By Manual Means

Providing and laying interlocking concrete block pavement(M40) having thickness 80mm as per technical specification clause 1504(inclusive of Edge restraint and carriage)

HPC, 1000mm dia Single Opening: Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause No. 802, 803, 1202 & 1203. A. With crushed stone, II) P.C.C. Grade M-10, (i) Nominal mix

B. Type-B (First class) bedding: Laying First class bedding on well compacted approved granular materials as per clause 1105 (ii)

1st class brick work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specification Clause No. 600, 1202 & 1203. II) Brick masonary in 1:4 cement mortar.

Providing and lying reinforcement cement concrete pipe NP-3 for culvert on 1st class bedding of granular materials in single row including fixed in collar with cement mortar 1:2.But excluding excavation protection work back filling concrete and masonry work in head wall and parapets clause 1106.(B) 1000m dia

Plastering with cement mortar 1:4, 15mm thick on brick work in sub-structure as per technical specification clause No. 613.4 & 1204

HPC, 1000mm dia Double Opening : Dismantling of Structures Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. (C) Reinforced Cement Concrete

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause No. 802, 803, 1202 & 1203. A. With crushed stone, II) P.C.C. Grade M-10, (i) Nominal mix

B. Type-B (First class) bedding: Laying First class bedding on well compacted approved granular materials as per clause 1105 (ii)

1st class brick work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specification Clause No. 600, 1202 & 1203. II) Brick masonary in 1:4 cement mortar.

Providing and lying reinforcement cement concrete pipe NP-3 for culvert on 1st class bedding of granular materials in single row including fixed in collar with cement mortar 1:2.But excluding excavation protection work back filling concrete and masonry work in head wall and parapets clause 1106.(B) 1000m dia (Double Opening)

Plastering with cement mortar 1:4, 15mm thick on brick work in sub-structure as per technical specification clause No. 613.4 & 1204

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Trafic signs: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. i) 60 cm equilqterql triqngle

RCC guard post: Supplying,fitting and fixing RCC guard post size 15 cm dia,150cmlong,75cm above the ground and 75cm below the ground, with 4-12mm Tor steel main steel and 6mm MS stirrups at 30cm c/c tied inposition with annealed black wire, cement concrete proportin 1:2:4with broken stone aggregate up to 20mm size including centering, mouldingthe top. curing,paintedblack and white alternatelyin 23cm strips upto 0.75m from the top having reflective band 2 nos.of desired shade etc. as per design and direction complete. (b) 15 cm dia with 4-12mmTor bar

Planting of Trees and their Maintenance for three Year (Planting oftrees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering ,fixing the tree guatrd and maintaining the plants for three year

(2)Construction of Panbari Tini Ali to 3No. Harimandir Via Bhorali Chuck (Ch. 800.00m to Ch. 2500.00m) Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. (A) In area of non thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5 (a) Private land

Construction of Sub grade and earthen shoulders with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.2 with a lead up to 1000m as per technical specification clause 303.1 (a) Private land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(ii) For grading-II material,

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405 (A) By Manual Means

Providing and laying interlocking concrete block pavement(M40) having thickness 80mm as per technical specification clause 1504(inclusive of Edge restraint and carriage)

HPC, 1000mm dia Single Opening: Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause No. 802, 803, 1202 & 1203. A. With crushed stone, II) P.C.C. Grade M-10, (i) Nominal mix

B. Type-B (First class) bedding: Laying First class bedding on well compacted approved granular materials as per clause 1105 (ii)

1st class brick work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specification Clause No. 600, 1202 & 1203. II) Brick masonary in 1:4 cement mortar.

Providing and lying reinforcement cement concrete pipe NP-3 for culvert on 1st class bedding of granular materials in single row including fixed in collar with cement mortar 1:2.But excluding excavation protection work back filling concrete and masonry work in head wall and parapets clause 1106.(B) 1000m dia

Plastering with cement mortar 1:4, 15mm thick on brick work in sub-structure as per technical specification clause No. 613.4 & 1204

HPC, 600mm dia Single Opening : Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause No. 802, 803, 1202 & 1203. A. With crushed stone, II) P.C.C. Grade M-10, (i) Nominal mix

B. Type-B (First class) bedding: Laying First class bedding on well compacted approved granular materials as per clause 1105 (ii)

1st class brick work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specification Clause No. 600, 1202 & 1203. II) Brick masonary in 1:4 cement mortar.

Providing and lying reinforcement cement concrete pipe NP-3 for culvert on 1st class bedding of granular materials in single row including fixed in collar with cement mortar 1:2.But excluding excavation protection work back filling concrete and masonry work in head wall and parapets clause 1106.(B) 1000m dia (Double Opening)

Plastering with cement mortar 1:4, 15mm thick on brick work in sub-structure as per technical specification clause No. 613.4 & 1204

Repairing of Culverts : Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clause No. 802, 803, 1202 & 1203. A. With crushed stone, II) P.C.C. Grade M-10, (i) Nominal mix

1st class brick work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specification Clause No. 600, 1202 & 1203. II) Brick masonary in 1:4 cement mortar.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Trafic signs: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. i) 60 cm equilqterql triqngle

RCC guard post: Supplying,fitting and fixing RCC guard post size 15 cm dia,150cmlong,75cm above the ground and 75cm below the ground, with 4-12mm Tor steel main steel and 6mm MS stirrups at 30cm c/c tied inposition with annealed black wire, cement concrete proportin 1:2:4with broken stone aggregate up to 20mm size including centering, mouldingthe top. curing,paintedblack and white alternatelyin 23cm strips upto 0.75m from the top having reflective band 2 nos.of desired shade etc. as per design and direction complete. (b) 15 cm dia with 4-12mmTor bar

Planting of Trees and their Maintenance for three Year (Planting oftrees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering ,fixing the tree guatrd and maintaining the plants for three year

DHANSAGAR CHOUDHURY

PRABESH BARMAN

Mun doley