8306 WELCOME MAINTENACE FOR MD ACCN AND CERTAIN B/R REPAIRS LIKE REPLACEMENT OF WIREMESH, CURTAIN RODS, GLASS PANES, MIRROR AND WC, WASH BASIN TO BLDGS IN THE AFMC AREA UNDER GE (CENTRAL) PUNE

Amount

M& L for preperation of old decorated or unplastered surface including all cornices of walls and applying one coat of white wash all as specified.

All as per item no 1 above but one coat of white wash on ceiling.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper ( White or tinted ) on walls.

Complete removal of existing treatment, washing, scrubbing down, preparing and providing one priming coat and two coats of oil bound distemper on walls all as specified.

M&L for preparation of old decorative surfaces of ceiling incl, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper on ceiling all as spd and directed.

Complete removal of existing treatment and M&L for applying 2mm thick wall care putty and applying two coats of oil bound distemper on walls all as specified and directed.

M&L for Preparation of old decorated surfaces of walls and applying one coat of cement base paint white or tinted all as directed.

M&L for Preparation of old decorated surfaces of walls and applying two coats of cement base paint white or tinted all as directed.

M&L for preparation of old decorative surfaces and providing one coat of weather proof exterior emulsion paint on walls complete all as specified and directed.

M&L for preparation of new or old plastered surfaces and providing one coat of weather proof exterior emulsion paint on cornices, borders, facia of chajjas & projected columns etc complete all as specified and directed.

M & L for one coat of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified.

M & L for one coat of synthetic enamel paint on steel surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified.

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6.

M & L for providing precast cement concrete solid buiilding blocks 10 cm thick type B-1 (1:2:4) with plain or interlocking joints setting in CM 1:6 in walls all as specified & directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete,

M&L for 15mm thick rendering in CM 1:6 over Stone /brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete.

M&L for 15mm thick rendering in CM 1:6 over Stone /brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for external wall surfaces complete.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified

M&L for preparation of new plastered surface and applying three coats of white washing on walls all as spd and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for coloured Ceramics tiles 300x200x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified

M & L for 600 x 300 x 6 to7 mm thick, coloured glazed vitrified tiles as in skirting/dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified

M&L Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 all as specified

M&L Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 all as specified

M&L Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick backing coat in CM 1:4 all as specified and as directed by Engr-in-Charge.

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick backing coat in CM 1:4 all as specified and as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar.

M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces.

M & L chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide.

M&L Machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced.

M&L for 75mm thick PCC (1:4:8) type C2 (using 40mm graded aggregate) as in sub base/flooring/ paving complete;

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6).

Taking up or down carefully steel tubing and connections including cleaning for refixing or removal to store of size:-

(a) 15mm dia

(b) 20mm dia

(c) 25mm or 32 mm dia

(d) 40 mm or 50 mm dia

Refixing old steel tubing and connections in new or old postion (wall/floor/ceilings etc) of size

(a) 15mm dia

(b) 20mm dia

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc.

(a) 15mm dia bore

(b) 20mm dia bore

(c) 25mm dia bore

(d) 32 mm dia bore

(e) 40 mm dia bore

(f) 50 mm dia bore

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding and connection to trap, and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete .

S & F in repairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including Plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in repairs vitreous china ceramic white Single peice WC (S or P trap) with UF soft close seat cover, hinges, accessories set, size 365 x 655 x 765 mm , Product Code: LYS-WHT-38851SSM of Jaquar or equivalent make approved by GE, complete all as specified and directed.

S & F in repairs stainless steel kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste including bedding in cement mortor or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm X 330mm X 160 mm

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply & 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe and fixing waste pipe etc. complete.

S&F in repair oval shaped vitreous china WHB table top Coyal snow white, fancy type of 460mm dia, cat No S2020105 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed by Engr-in-Charge.

S&F in repair oval shaped vitreous china , under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm, cat No S2030104 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed by Engr-in-Charge.

S & F 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, cat No. F2002104 of cera or of equivalent make specified here-in-after complete.

S & F 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete

All as per item No. 51 here in before but fixed as in repairs

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm chromium plated wall mixer (2-in-1) with arrangement for overhead shower complete all as specified here in after.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No 57 here in before but consealed long shank

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia.

S & F flexibe waste pipe of 32 mm or 40 mm dia for wash hand basins, sink etc complete as fixed in repairs.

S & F stainless steel gratings 100 mm dia with hole for waste pipe complete.

S & F chromium plated soap dish fixed to plugs with chromium plated brass screws as fixed in repairs.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete.

S & F in repairs CP health faucet including flexible cod complete all as specified and directed.

S & F in repairs CP toilet paper holder complete all as specified and directed.

S & F in repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges complete all as specified and directed.

Dismantling water tanks of capacity exc. 250 Ltrs and not exc. 500 ltrs removing to stores

All as per item 67 above but capacity exceeding 500 ltrs and not exceeding 1000 ltrs

All as per item 67 above but capacity exceeding 1000 ltrs and not exceeding 2000 ltrs

S&F rotational moulded polythylene water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion all as specified and directed of 500 ltrs capacity.

All as per item no 70 above but 1000 ltrs capacity.

All as per item no 70 above but 2000 ltrs capacity.

M & L for Cleaning of PVC water tank of capacity exc 250 but n.exc 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. including disconnecting existing tanks, and hoisting if required reconnecting and re-fixing in position inclusive of all GI fittings complete.

All as per item no 73 above but capacity exc 500 but n.exc 1000 ltr

All as per item no 73 above but capacity exc 1000 but n.exc 2000 ltr

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete( 210 gms weight)

S&F in repairs 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of ISI marked

S&F in repairs 25mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of ISI marked

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

S & F 75 mm bore PVC (SWR) vent cowl

S & F 110 mm bore PVC (SWR) vent cowl

S&F PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugd including taking down existing of make :- ATUL, Commander or equilvalent.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) complete

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long.

Taking down wooden shutter and refixing in including resecuring or easing and adjusting in the same opening.nexc 1.00 sqm each

Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening.exc 1.00 but nexc 2.00 sqm each

S&F aluminium powder coated fancy type curtain rod 25mm bore.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removed to store.

S&F II nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S&F pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M&L for Cement concrete 1:3:6 type C0 (12.5mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete

Supply & fixing box type steel windows with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars dovetailed or welded all as specified.

Supply & fixing box type steel windows with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete without glazing bars dovetailed or welded all as specified.

M&L Mild steel box type ventilator with top hung shutter incl hinges ,steel peg stay complete incl one shop coat of Zink chromate primer.

M & L preparing surfaces of wood or wood based material new or old if any description or girth treating end of post, back of chowkats etc with tar or coal tar black paint.

Cutting holes in stone / brick / concrete block masonry walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete.

M & L preparing surfaces of wood or wood based material, steel and iron work, new or old of any description or girth treating small articles such as stop covers, gully traps, grating , hold fasts treated with tar or coal tar black paint area n exc 0.1 Sqm each.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, supplied and fitted to chowkats.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a)

M & L preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters.

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters.

S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed.

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.

S & F in repairs floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm .

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F anodized aluminium alloy , 20mm dia hanger rod in cupboards with fixing brackets, stops, rollers etc.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each.

S&F in repair three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F mild steel framed work such as grills, framed guard bars etc and similar work confirming to Fe-290, grade E-165.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of systhetic enamel paint over a coat of red oxide or zinc chrom primer complete.

S & F mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete.

Taking down shutters of any description n.exc. 1 Sqm each .

Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each .

S & F 18 mm thk PVC sheet shutter one side prelim of any shade as in cupboard or kitchen cabinet etc complete all as specified. Make- Rajashri / syntex

S & F 18 mm thk solid PVC board as in cupboard shelves , in kitchen cabinet etc complete all as specified. Make- Rajashri / syntex

S & F 75 mm long stainless steel handles complete all as specified.

S & F 40 mm long self closing type hydroulic box type stainless steel hinges complete all as specified.

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing & securing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area .

Taking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for frosted glass 3mm thick ordinary quality and glazing & securing with oil putty or fixed with beads, each pane n. exc 0.5 Sqm in area .

S & F plain fillets in 2nd class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area not exc 3 sqcm for glazing

S & F in repairs mild steel ordinary rat tail rod pattern spring 300 mm size including roller & roller plate complete.

S & F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed.

S & F in repairs alluminium anodised barrel tower bolt of extruded section and fixed as in repairs 150 mm long.

S&F extruded alluminium alloy handles fabricated type anodised size 150 mm fixed as in repairs

S & F hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 75 mm size,fixed as in repairs

M & L Running welding in repairs thickness of metal to be welded n.exc 6mm

S&F in repairs stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 36"x36"x8" and of approved quality of finish all as spd and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light all as specified and directed.

M & L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

M & L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm complete.

M/S Sharvi Construction

Mourya Enterprises

N B ENTERPRISES

M/s.BAJRANG CONSTRUCTION