Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-Finance GHORADHARA JHARGRAM | L1 | Accepted-Finance Offered lowest rate. | |
| 2 | L2₹18.7 L+₹14,808.53 (0.80%)Rejected-Finance 211 2 NARAYANTALA EAST BAGUIHATI KOLKATA | KOLKATA | WEST BENGAL | 700001 | L2 | Rejected-Finance Higher than L1. | |
| 3 | L3₹18.9 L+₹37,021.33 (2.00%)Rejected-Finance ADAM KANAN JHARGRAM 721507 | JHARGRAM | WEST BENGAL | 721507 | L3 | Rejected-Finance Higher than L1. |
Tender Value
Refer Docs
EMD Value
₹38,280
Closing Date
7 Sept 2022, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, MALDA MECHANICAL DIVISION, PHE
Office of the Executive Engineer, Malda Mechanical Division, PHE Dte. Doulatpur PHE complex, P.O. Maliha, Dist. Malda, PIN 732102
Modification and improvement of different Electro-Mechanical Installations and allied works at Mothabari Distribution Zone within Malda Arsenic Area Water Supply Scheme (Southern Sector) under Malda Mechanical Division, PHE Dte.
2022_PHED_395433_7
WBPHED/EE/MLMD/NIeT_07 of 2022-2023
Open Tender
Electrical Work/ Equipment
Item Rate
45 days
Doulatpur PHE Complex, P.O. Maliha, Dist. Malda
Please refer Tender documents.
6 documents required · 6 mandatory
₹38,280
Yes
26 Sept 2022
22 Aug 2022
9 Sept 2022
22 Aug 2022
7 Sept 2022
22 Aug 2022
Amount
Supply, Delivery and storage at site of horizontal Split casing Centrifugal Pumping Machinery alongwith horizontal foot mounted induction motor suitable for the pump duty mentioned above with adequate margin with baseplate, flexible coupling, coupling guard, foundation bolt etc. having the following specification Discharge :- 100 m3 per hour Generated Head :- 35 MWC H-Q-P Curve of pumps, Datasheet, General Arrangement of drawing and Pump Manufacturing Quality Plan has to be submitted during the delivery. Routine test certificate of Induction Motor has to be submitted during delivery
Supply, delivery and storage at site of CI doble flanged single door swing check 80 mm dia N.R.V with by-pass arrangement as per IS : 5312, Part-I, PN-1.0 N.B. : Test Certificate to be produced for each valve. (AT DELIVERY SIDE OF PUMP)
Supply, delivery and storage at site 80 mm dia double flanged Cast Iron actuator operated butterfly valve generally conforming to BS 5155 and disc conforming to IS:210 ,PN-1.0. N.B. : Test Certificate to be produced for each valve (AT DELIVERY SIDE OF PUMP )
Supply, delivery and storage at site 200 mm dia double flanged Cast Iron gear operated butterfly valve generally conforming to BS 5155 and disc conforming to IS:210 PN-1.6 N.B. : Test Certificate to be produced for each valve. (AT COMMON DELIVERY HEADER )
Supply, delivery and storage at site 80 mm dia Cast Iron kinetic double orifice air released valve as per relevant IS, PN-1.6. N.B. : Test Certificate to be produced for each valve. (AT COMMON DELIVERY HEADER )
Supply, Delivery and Storage at site suitable M.S. Dismantling Joint
DN 80 mm PN 1.0 ( for Delivery side & common header of pump )
Pressure gauge (H.Guru/Febig) 150mm dia (0-7Kg/Sq.cm) brass cock and fitting complete. (This cost includes 15 mm. dia G.I. pipes and specials)
Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over two coat of primer as per direction of EIC.
Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt MCC Panel having required Feeders.
Supply, Delivery and storage at site 4 core 1.1 KV Grade 70 mm2 XLPE insulated Al.Ar Cable.(For MCCB to Main Incomer of MCC Panel)
Supply, Delivery and storage at site 3 core 1.1 KV Grade 2 X 25 mm2 XLPE insulated Al.Ar Cable.(For MCC Panel to individual 2 nos. Induction motor )
Supply, Delivery and storage at site 3 core 1.1 KV Grade 6.0 Sq. mm. XLPE insulated Al.Ar Cable.(For MCC Panel to individual valve actuator)
Supply, Delivery and storage at site 12 core 1.1 KV Grade 1.5 Sq. mm. XLPE insulated Copper Control Cable.
Making internal wiring/electrification of the High Lift Pump House by ( 1.5sqmm X 2 + 1.5mm. X 1 ECC) single core PVC insulated multistrand FR Grade flexible Cu. wire through 20 mm dia rigid PVC conduit pipe by supplying one 240/415 V, 16 Amp DP MCB of Breaking capacity 10kA & C characteristics with MCB SS enclosure with IP-20/30 protection, PVC Board & Piano key type switch. (avg. run 5 mtr)- 18watt wall mounted LED Batten- 2 nos, 9W LED lamp-1 no, 36 W LED luminarie (BRP 046) OR equivalent and same techinal specification, 5 Pin 5 Amp Plug point, 240V 48"(1200mm) sweep BEE 3 star rating (minimum) AC ceiling fan with electronic step regulator-1 no., Two no Exhaust fan point (Total point 7nos. with one plug point) including drawing power by suitable gauge Cu.wire from panel board to DP MCB as per direction of EIC (Fittings should be of Philips make & rising should be with continuous earthing arrangement)
Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work.
Installation of all items as mentioned in Sl.No. 1.00 to 14.00 including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials and copper socket gland complete, earthing arrangement of motors, PMCC cum PDB Panel including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per IE rules and upto entire satisfaction of EIC.
Testing & Commissioning of the entire installation i.e. Pumping Machinery, Valves and fittings, Electrical acessories and instrumentation etc. as in Sl.No. 1.00 to 14.00 as per direction and to the entire satisfaction of E.I.C.
MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019
Add GST @12%
Add GST @1%
P K ENGINEERING
DEBJYOTI BASU
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .