Construction of 02 Nos Toilets, Septic Tank at SE Office Complex including repair to Boundary Wall (UT Capex Budget)

Amount

Demolishing cement concrete manually/by mechanical mean sincluding disposal of aterial within 50 meters lead as per direction of Engineer-in-charge A) 1:3:6 or richer mix

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unerviceable material within 50 mtr lead as per direction of Engineer-incharge. In cement mortar

Engaging actual labour for cleaning of complex area cleaing of drain and cutting of tree trunks etc Engaging 03 no. labour for 03 days= 9 No's

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead 15.23.1 for thickness of tiles 10 mm to 25 mm

Earth work in ecavation by manual means over areas (exceeding 30 cm and up to 1.5 m in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth upto 1 m from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil

Providing and laying in position cement concrete of specified grade inclduing curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:5:10 ( 1 cement 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade inclduing curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:3:6 ( 1 cement 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay, (Non nodular) bricks of class designation 7.5 in foundation and plinth inclduing curing in cement mortar 1:6 ( 1 cement 6 coarse sand)

Extra for brick work with common burnt clay bricks / cement concrete bricks insuperstructure above pliinth level upto floor five level

Reinforced cement concrete work in beams suspended floors roofs having slope upto 15 degree landings, balconies, shelves, chajjs, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement but excluding the cost of centering, shuttering, finishing and reinforcemetn with 1:1 1/2: 3 ( 1 cement: 1 1/2 coarse sand : 3 graded stone agregate 20 mm nominal size)

Steel reinforcement for RCC work inclduing straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars

Centering and shuttering inclduing strutting propping etc removal of form work for

Foundation, footing, bases of columns

Suspended floors, roofs, landings, balconies and access platform

Edges of slabs and breaks in floors and walls under 20 cm wide

Providing wood work in frames of doors, windiws, clerestory windows and other frames, wrought frames and fix in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fasternes shall be paid for separately). Sal woof

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of rquired size with necessary screws, excluding paneling which will be paid for eparately all complete as per direction of Engineer-in-charge (Note: but hinges and necessary scews shall be paid separately) Second class deodar wood (thickness 35 mm)

Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and claerestory windows (Area of opening for panel inserts excluding portion inside grooves or revates to be measured). Panelling for paneled or paneled and glazed shutters 25 mm to 40 mm thick. Plane partical board flat pressed, 3 layers or graded wood partical board medium density Grade I.IS: 3087 marked

Providing and fixing blazed shutters for doors,m windows and clerestory windows using 4 mm thich float glas panes including ISI marked MS pressed butt hindges bright finished or required size with necessary screws. Second clas deodar wood (35 mm thickness)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm dia meter bolts, nuts and wooden plugs and embeddings in cementconcrete block 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

6 mm cement plaster to ceiling of mix 1:3 ( 1 cement: 3 fine sand)

12mm Cement plaster of mix 1: 4 ( 1 cement: 4 fine sand)

15 mm cement plaster on the rought side of single or half brick wall of mix 1: 6 ( 1 cement 6 fine sand)

Cement concrete flooring 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregate) finished with a floating coat of neat cement inclduing cement slurry and curing complete, but excluding the cost of nosing of steps etc complete 50 mm thick with 20 mm nominal size stone aggregate

Providing and fixing 1st quality ceramix glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all coloursm, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying rectified Glazed Ceramic floor tiles of size 300 x 300 mm or more (Thickness to be specified by the manufacturer) of 1st Quality conforming to IS: 15622, of approved make, laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand), inclduing grouting the joints with white cement and matching pigments etc, complete. in colour such as white, Ivory, Grey, Fume red Brown in all colours, shades, except White, Lvory, Fume Red Brown

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (Two or more coats) over and inclduing priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on new work (two or more coats applied @ 3.84 Kg/10 sqm)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more quotes on new work

Wlding, including transportation of plant at site etc. complete by gas plant

Finishing with Epoxy paint (Two or more Coats) at all locations prepared and applied as per manufacture's specifications including appropriate priming coat. Prepartion of surface, etc complete. On steel work

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodiccoating not less tha grade AC 10 as per IS: 1868) transparent or dyed torequired colour or shade with nuts and screws etc. Complete: 250 x 16 mm

Providing and fixing aluminium handles ISI marked anodized (anodic Coating not less than grade AC 10 as per IS: 1868) transparent or dyed to requried colour and shade with necessary screws etc. complete 125 mm

Providiing and fixing aluminium tower Bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) trasparent or dyed to required colour or shade with necessary screws etc complete A) 200 x 10 mm

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well remmed and consolidated and grouted with fine sand inclduing finishing th top smooth and curing complete

Providing and placing on terrace (at all floors levels) Polyethylene water storage tank ISI: 12701 marked, with cover and suitalb elocking arrangement and making necessary holes for inlet, outlet and overflow holes for inlet, outlet and over flow piples, but without fittings and the base support for tank

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls, etc. (Conealed pipe including painting with anti corrosive, bitumastic paint, cutting chases and making good the wall

15 mm dia, nominal bore

20 mm dia nominal bore

Providing and fixing white vitreous china pedetal typewater closet (European type W.C pan) with seat and lid. 10 liter low level white PVC flushing cistern, including flush pipe with manually controlled device (Handle lever). Conforming to IS: 7231, with all fittings, and fixtures complete, including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with CI brackets, 15 mm CP Brass pillar Taps, 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good te walls wherever requried. White vitreous china flat back wash basin size 550 x 400 mm with single 15 mm CP brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe

Providing and fixing 15 mm nominal bore CP Brass angle valve for basin mixer and geusor points of approved make conforming to IS: 8931

Providing and fixing 15 mm nominal bore C.P stop cock (Concealed) of standard design and of approved make conforming to IS: 8931

Providing and fixing uplasticized PVC connectionpipe with brass unious 15 mm nominal bore

Providing and fixing PVC pipe for sanitation (RATE TO BE QUOTED BY THE CONTRACTOR)

Steel work welded in built up section/framed work, inclduing cutting, hoisting, fixing in position and applying a priming coat of approvd steel primer using structural steel etc as requried. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Carriage of stone aggregate 20 mm from source upto site of work AV 05 Km by Mt

Carriage of stone aggregate 40 mm from source upto site of work AV 05 Km by MT

Carriage of sand from source upto site of work AV 60 Km by Mt

Carriage of bricks from source upto site of work AV 75 Km by MT

NARINDER SINGH

Akhilesh Bansotra Govt Contractor