e-NIT No.03 / (EnM) M-8/ 2022-23, Item No.06

Supply of Horizontal Non-Clog Sewage Solid Handling Pump of Head: 15-18 Mtr, Discharge: 310-320 M3/Hr (approx), 1450 RPM with Impeller & Neckring (CI), Casing (CI), SS Shaft & Sleeve, Size: 150 X 150 MM in fitted condition with suitable bearings and other parts. Make: Kirloskar /Mather & Platt/Jyoti /DJB Approved Make.

Supply of 3-phase TEFC Sq. Cage AC Motor of 30 HP Capacity with 1450 RPM suitable for above Pump. Make: CG/Kirloskar/ABB/DJB Approved

Supply of Suitable Coupling-set, M.S Coupling Guard and MS Base Frame/Trolley for above coupled Pump-set as per requirement.

Supply of Horizontal Non-Clog Sewage Solid Handling Pump of Head: 10 Mtr, Discharge: 200-250 M3/Hr (approx), 1450 RPM with Impeller & Neckring (CI), Casing (CI), SS Shaft & Sleeve, Size: 125 X 100 MM in fitted condition with suitable bearings and other parts. Make: Kirloskar /Mather & Platt/Jyoti /DJB Approved Make.

Supply of 3-phase TEFC Sq. Cage AC Motor of 15 HP Capacity with 1450 RPM. Make: CG/Kirloskar/ABB/DJB Approved

Supply of Suitable Coupling-set, M.S Coupling Guard and MS Base Frame/Trolley for above coupled Pump-set as per requirement.

Supply of M.S. Flange of 150 mm dia.

Supply of M.S. Flange of 125 mm dia.

Supply of Nut Bolts & Washers of good quality.

Supply of 75% neoprene rubber packing sheet.

S/O MS Pipe Confirming to IS: 1239 Part-I, Medium 150 mm diameter. Make: Jindal/ Tata.

S/O MS Pipe Confirming to IS: 1239 Part-I, Medium 125 mm diameter. Make: Jindal/ Tata.

Supply of C.I/D.F Non-Rising with SS Spindle Sluice Valve, PN 1.0, C.I. Body/Wedge/ Bronze-Rings/ SS/410 Shaft construction of 150 mm size. Make:- Kirloskar/ IVC/DJB Approved make.

Supply of C.I/D.F Non-Rising with SS Spindle Sluice Valve, PN 1.0, C.I. Body/Wedge/ Bronze-Rings/ SS/410 Shaft construction of 125 mm size. Make: - Kirloskar/ IVC/DJB Approved make.

Supply of C.I.D./ F Swing Type Non-Return Valve, PN 1.0, C.I. Body/ Door/ Bronze to rubber rings/ SS/410 Hinge pin construction of 150 mm size. Make: - Kirloskar/ IVC/DJB Approved make.

Supply of C.I.D./ F Swing Type Non-Return Valve, PN 1.0, C.I. Body/ Door/ Bronze to rubber rings/ SS/410 Hinge pin construction of 125 mm size. Make: - Kirloskar/ IVC/DJB Approved make.

S/O Manually Operated Oil Immersed sheet steel clad wall mounting Start- Delta Starter upto 31-40 HP capacity of heavy duty with double contact, under voltage release, Triple Pole Thermal Bimetallic Overload Relay with single phasing protection suitable for squirrel cage induction motor, 415V, 3-phase, 50Hz. Make: Advance/Bentex/Capital

S/O Manually Operated Oil Immersed sheet steel clad wall mounting Start- Delta Starter upto 20 HP capacity of heavy duty with double contact, under voltage release, Triple Pole Thermal Bimetallic Overload Relay with single phasing protection suitable for squirrel cage induction motor, 415V, 3-phase, 50Hz. Make: Advance/Bentex/Capital

Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 16 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI

Fabricating/Supply and Fixing of G.I. Metro Sheet shed of size 12 feet long x 10 feet width made out of G.I. Corrugated as per Shed size and Complete Shed frame made by M.S. Squre Pine Size of 75 mm sq for main legs and vertical welded pipe size of 50 mm sq M.S.Pipe duly welded at site and after the Fabrication the frame complete sheet fixing with the help of ripit and water proof nut and bolts and washer with providing the Door size 7 feet x 3.5 feet fixing in front side with locking arrangement. Complete shed fixing at site.

Making the arrangement and laying of abobe 150mm MS delivery pipe line up-to main drain by welding the flanges on both sides of all above MS pipes and jointing all pipes through rubber packing & nut-bolts with washers. The Job also includes breaking of footpath & removing the soil, sludge to make way for setup the pipeline etc. as per site requirement.

Transportation, loading and unloading charges of material at site.

Primer & Paint on complete M.S. Pipe & specials with two coats of red oxide primer & epoxy paint to protect from rust

Installation and Fitting of above Pumps & Motors and all equipments at site. The job also includes installation / laying & fixing of Pipes in sump-well and providing sunction & delivery by fixing of Valves, Bends, Reducers, Flanges etc. of both side (suction & delivery side) including primer & paint on complete equipments as per the site requirement & proper-alignment of pump-sets after taking all safety precaution arrangements, all Tools & Tackles etc. The work shall be completed on turn-key basis and job also includes testing of motor & Pump-set on full load condition as per site requirement and direction of engineer-in-charge.

Testing and commissioning of rising main on full pressure by running of all pump-sets and as per satisfaction of Engineer In-charge.

SAI TRADING CORPORATION