Construction of P.H.C.Building at Chamiyari in Tehsil Bangana Distt. Una H.P.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge within all leads and lifts including clearing of Jungle is all kind of soil Pick work, Ordinary rock, Jumper work, Blasting work and Land blasting work and than disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-charge including carriage of material within all leads and lifts. All useful material such as stone, shingle, sand and slates etecetra shall be sorted out. A recovery of 34.65 cum (Thirty four decimal six five cubic meter) stone to be obtained from cutting at the rate of Rs. 300/-(Rupees Three hundred) per cubic metre shall be effected on prorata basis in each running bill for this item. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, Ordinar rock, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by engineer-in-charge including carriage of material with in all leads and lifts. All useful material such as stone, shingle, sand and slates etecetra shall be sorted out. A recovery of 95.35 cum (Ninety five decimal three five cubic meter) stone to be obtained from excavation cutting at the rate of Rs. 300/-(Rupees Three hundred) per cubic metre shall be effected on prorata basis in each running bill for this item. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in foundations, footings, bases of columns, etc. for mass concrete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Suspended floors, roofs, landings, balconies and access platformas per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Stairs, (excluding landings) except spiral stair cases as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in Edges of slabs and breaks in floors and walls under 20cm (twenty centimeter) wide as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement : five coarse sand : ten graded crushed stone aggregate 40mm ( forty milimeter nominal size) mechanically mixed and curing complete excluding cost of form work and finishing in Retaining wall/ Breast wall in ant thickness including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc upto all floor level as per the direction of Engineer- In-Charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 ( One cement : four coarse sand : eight graded crushed stone aggregate 40mm (forty milimetre) nominal size)mechaniclly mixed and curing complete excluding cost of form work upto all work in foundation and plinth level including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , labour cess or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:5:10 (one cement : five fine sand : ten graded/ crushed stone aggregate 40 mm (forty millimeter) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in all work in foundation and plinth level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying in position cement concrete 1:2:4 ( One cement : two coarse sand : four graded crushed stone aggregate 40mm (forty milimetre) nominal size)mechaniclly mixed and curing complete excluding cost of form work upto all work foundation and plinth level including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , labour cess or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work finishing and reinforcement with graded crushed stone aggregate 20mm nominal size all work upto plinth level upto all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated with graded crushed stone aggregate 20mm nominal size including curing complete excluding cost of form work finishing and reinforcement in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc up to all heights in all floor level complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work finishing and reinforcement work with graded crushed stone aggregate 20mm nominal size in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level upto all height in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed including curing complete, including the cost of required centering, shuttering but , excluding cost of reinforcement in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like above plinth level upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete work M-25 (M-twenty five) design mix to obtain compressive strength of 25N/mm² with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed including setting in cement mortar 1:3 ( 1 cement : 3 coarse sand), including the cost of required centering, shuttering with neat cement punning on exposed surfaces but, excluding the cost of reinforcement in shelves and the like above plinth level upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate upto all floor level, including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Back filling with granular material behind return walls, abutment, wing walls, Breast walls and retaining walls complete as per drawing and technical specifications clause 1204.3.8 and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax goods service tax, labour cess or other taxes imposed by the Government.

Stone filling dry hand packed under floor/retaining walls including watering, ramming and consolidating with at least one broken stone face and packed in proper upto all heights as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing weep holes in stone masonry, plain/ reinforced concrete abutment, wing walls, return walls, retaining walls with 110mm ( one hundred ten millimeter) diameters, of finolex/ D-Plast make having working pressure 4.00 kg per square millimeter extending through the full width of the structures with a slope of 1 ( one) vertical : 20 ( twenty horizontal) toward drawing face complete as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter) thick cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size and curing complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.70 kg (one point seventy kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Fe-500D tor steel reinforcement make of SAIL,TISCO,RINL,JINDAL, PANTHER of JSPL,SHAYAM STEEL as per structural design for reinforced cement concrete work including straightening, cutting, bending, binding and placing in position complete in all height including cost of binding wire upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm (six millimeter) thick Plaster with cement mortor 1:3 (one cement : three sand) in any floor/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing 6mm cement plaster to ceiling in cement mortar 1:3 (one cement : three sand) including carriage of materials within all leads and lifts in all floor levels. as per the direction by Engineer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of taxes imposed by the Govt.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections including carriage of materials within all leads and lifts in all floor levels. as per the direction by Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6(One cement: six coarse sand) in all heights and depth as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortor 1:4(one cement: four coarse sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to any floor level including scaffolding in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto all floor level in cement mortor 1:4 (one cement: four coarse sand) including scaffolding as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing factory made flush door shutters 35mm thick (commercial board both side ) non decorative type, waterproof core of block board construction with full frame of first class hard wood and well match commercial three ply vaneer with vertical grains or cross band and face vaneer on both face of flush door ISI Marked IS No. 2202 of Kitty flush door Kitply industries (Swastik) Jawala Sgmrat laminate Pvt. Ltd.(Sgmart)CNC Commercial Ltd.(Shivalik) SR Jindal Ply wood industries (Prima) Make .including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing wire gauge 35mm thick shutter in Z-Section Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) using galvanised M.S. wire gauge of average width of aperture 1.45mm in both direction with wire of dia 0.63mm (zero point six three milimeter)for doors, windows of ISI marked M.S. pressed butt hinges bright finished of required size and clear story windows with metal beading of approved qualty and shape section with hings necessary screws and applying a coat of primer with red lead paint complete upto all floor level as per approved design.as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter ) dia chromium plated brass curtain rod having wall thickness of 1.25mm (one point two five millimeter) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 19mm thick (nineteen millimeter) made of action teasa Green Novapan kiply National Archid ply termite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet shell be of 8mm (Eight Millimeter) thick ply & all cut portions of shelves shall be finished with 6mm (Six millimeter) hard board edging. The cut potion of shutters from all the side shall be finished with 12mm thick hard wood edging, the shutters from outside shall be finished with 1mm thick laminated sheet of approved shade including piano hinges and magnetic catcher with all accessories complete as per detail architectural drawing upto all floor level including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing 19mm thick termite resistant water proof commercial board shutters with hard wood edging and PGI sheet lining inside of shutters of approved size contir miror to IS No. . 1659 of Novapan Archid ply Action Tessa Green National Kitply make including bright finished iron butt hinges etc. Complete as per details architectural drawing for the work.including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing 250x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing alluminium hanging floor door stopper with twin rubber stopper, necessary brass screws etc. to suit shutter thickness complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 50mm (fifty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 150mm ( one hundred fifty millimeter) oxidised M.S. double acting spring hinges with necessary screws etc. complete. upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc.complete. upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Structural steel work riveted, bolted or welded in built up sections in trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. upto all floor level as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work approved make i.e.TATA/JINDALSail, Tisco Shyam Steel, or as directed by the Engineeer-in-charge including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights all floor as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. tube hand rail of approved size as directed by the Engineer-in-charge by welding etc. to steel ladder railing, balcony railing, stair case railing and similar works, including applying priming coat of approved steel primer in all heights upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. channels doors, windows frames made of Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) manufactured from M.S. section ISMC 75 x 40 mm & M.S. flat 75 x 5 mm as per drawing including hinges jambs bead and if required angle threshold M.S. angle 50 x 25 mm welded or regidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 2.5mm( two point five millimeters) and provision of locking arrangement and shock absorber as technical specified and applying a coat of approved steel primer after pre treatment of surface upto all floor level as directed by the Engineer-in-Charge including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing MS channels doors, windows frames made of Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura)manufactured from M.S. section ISMC 75 x 40 mm and MS flat 75 x 5 mm in combination welded together and standarad window shutter having style of Z-section with T-Section of 25 x 25 x 3 mm and angle iron 25 x 15 x 3 mm as per drawing complete with fitting with necessary screws including hinges jambs beed and if required angle there should MS Angle 50x25mm welded or rigidly fixed by machanical means with split end tail to each Jamb including steel but hinges 2.5mm and provision of locking arrarangement and shock onbserver as specified after pretreatment and applying a primimg coat with red lead paint complete including glass 5mm (five millimeter) thick where required as per approved specification/design.as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Side Hung window

Top Hung window

Fixed window

Providing and fixing steel wire gauge shutter in Z-Section Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) using galvanised M.S. wire gauge of I.S. gauge designation 85g (eighty guage)with wire of dia 0.56mm (zero point five six milimeter)for doors, windows and clear story windows with metal beading of approved qualty and shape section with necessary screws and applying a coat of primer with red lead paint complete upto all floor level as per approved design.as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by weldingas complete upto all floor level per the specification and direction on Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST, Labour Cess or other taxes imposed by the Government.

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts and nuts and wooden plugs and imbedding in cement concrete block30x10x15 cm. 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregates 20mm nominal size complete upto all floor level within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Kota stone slab flooring over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortor 1:4 (one cement :four coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete 25mm (twenty five millimeter) thick upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Kota stone slab 20 mm (twenty millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement :three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying full body matt finished/Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) or as directed by the Engineer-in-charge with water absorption less than 0.08% and conforming to IS:15622, of approved make Kajaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson , in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete of class designation tiles 600x600 mm. complete upto all floor level ncluding entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying Vitrified tiles in different size (thickness to be specified by manufacturer), or as directed by the Engineer-in-charge 600mm x 600mm ( six hundred millimeter into six hundred millimeter) of Kajaria, NITCO, SOMAMY, ORIENT, RAK, Johnson & Johnson make, with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square meter) including grouting the joint with white cement and matching pigments etc. complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying White glazed tiles 300x450mm(three hundred into four hundred fifty millimeter ) thickness of size standard of Nitco/ Khajaria / Somany or equivalent thick in skirting risers of steps and dado over 12mm(twelve millimeter) thick cement mortor 1:3 ( one cement: three sand) and jointed with neat cement slurry including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) or as directed by the Engineer-in-charge of 1st quality conforming to IS : 15622 of Kazaria, NITCO, SOMAMY, ORIENT, RAK brand of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand), Medium shade pigment using 50% white cement, 50% ordinary cement, including rubbing and polishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 18 mm thick Raj Nagare plain white marble/Udaipur green marble/Zebra black marble gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, Area of slab over 0.50 sqm colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete upto all floor level ncluding entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 0.60mm thick prepainted steel sheet Tata Durashine make in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating plus back coat of polyster of 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I limpet and bitumen washers compelete with all accessories as required upto all floor Lavel as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm overall 0.60mm thick prepainted steel sheet Tata Durashine make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 micro over 5 microns primer coating plus back coat of polyester of 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted G.I limpet and bitumen washers complete with all accessories as required upto all floor level as per the direction of Engineer-in- Charge. as per direction of the Engineer in Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing valley 60cm overall 0.60mm thick prepainted steel sheet Tata Durashine make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted G.I limpet and bitumen washers complete with all accessories as required upto all floor level as per the direction of Engineer-in- Charge. as per direction of the Engineer in Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Flashings/ Aprons.( Upto 600 mm) precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete, upto all floor level as per the direction of Engineer-in- Charge. as per direction of the Engineer in Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

P/F MS BP Sheet (Tata Duroshine make) 1.66mm to 2mm thick in svaes board facia soffits seeking including fixing and welding to steel roof members and applying a coat of red lead primer complete as per Engineer in Chef (Basement of steel) work should shall be measured and for separetely. including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimeter) wide 30 cm (Thirty centimeter) overall semicircular plain G.I. sheet gutter Tata make with iron brackets 40x3mm (forty into three millimeter s) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete upto all floor level as per design as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diameter on wall face unplasticised Rigid PVC rain water pipesof Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make having working pressure 4.00 kg (four point zero zero kilogram) per Square centimeter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion,-Single socketed pipes complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) dia. PVC cowl ISI Marked make of FINOLEX of approved design complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC plain bend Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC plain shoe Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimeter) PVC clips Diplast/ Finolex, Supreme, AKG, Prince, Kisan, SFMC make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete upto all floor level as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 6mm thick everest board make of Novapan, Kitply, Nation Archid Ply, Action, Tessa Green Everest board ceiling (595x595) of approved quality cascade in power coated false ceiling G.I. frame work complete upto all floor level .within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing 15mm (fifteen millimeter) Cement plaster on the fair side on Single or half brick wall of mix cement mortor 1:6 (one cement: six coarse sand) in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing 15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six coarse sand) in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing 15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick walls finished with a floating coat of neat cement of mix cement mortor 1:3 (one cement: three coarse sand)in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) Cement plaster on the rough side of single or half brick wall of mix cement mortor 1:6 (one cement: six fine sand) in any floor level/any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying white cement based putty JK wall Putty/Birla white Putty of average thickness 1 mm (one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing walls with 100% Premium acrylic emulsion paint Nerolac, Berger(Bison Acrylic) Asian Paint (Tractor, Acrylic) Shalimar having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.complete upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces make of ICI(DULUX GLOSS),NEROLAC,BERGER( Lux of high gloss), ASIAN PAINTS(Premium Apcolite Gloss) shlimar with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter Enamel paint other than white upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Distempering two coat with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete upto all floor level/any height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Distempering two or more coat on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification, upto any floor level/any height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern of NTC make,including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 20mm nominal bore G.I. pipe with G.I. fittings in external work/internal work BST, Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya make including trenching and refilling etc. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm nominal bore G.I. pipe with G.I. fittings in external work/internal work BST, Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya make including trenching and refilling etc. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm nominal bore G.I. pipe with G.I. fittings in external work/internal work BST, Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya make including trenching and refilling etc. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Making connection 25 to 40mm (twenty five to forty millimeter) nominal bore of G.I. distribution branch with G.I. main by providing and fixing tee, including cutting and threading the pipe etc. complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Fixing water metre and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete (water meter and stop cock to be measured and paid for separately). including upto all floor level carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure pipe Concealed work, including cutting chases and making good the wall etc.2532 (32 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure pipe Concealed work, including cutting chases and making good the wall etc.2025 (25 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure pipe Concealed work, including cutting chases and making good the wall etc1620 (20 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipe Concealed work, including cutting chases and making good the wall etc 1216 (16 mm OD) pipe conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one point zero zero) metre ( spacing. This includes the costs of cutting chases and including testing of joints complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing viterous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid of Cera/Hindware/Jaquar, Parryware, Sanitaryware, Neycer in complete upto all floor level, including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) dia CP Brass single hole basin mixer of approved quality of preferred make of Cera/Hindware Parryware, Sanitaryware, Neycer as per standard bidding document, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimeter) with a 15 mm (fifteen millimeter) CP Brass single hole basin mixer complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of preferred make of Cera/Hindware Parryware, Sanitaryware, Neycer for wash basin completely recessed at the back for the reception of pipes and fittings complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back (large no. 60002 of Hindware or its equivalent) or wall corner type lipped front urinal basin make of Cera/Hindware Parryware, Sanitaryware, Neycer of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern, and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back (large no. 60002 of Hindware or its equivalent) or wall corner type lipped front urinal basin make of Cera/Hindware Parryware, Sanitaryware, Neycer of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern, and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen Sink with drain some Sink Neelkanth make complete upto all floor level :510x1040 mm bowl depth 250 Daimond make ,as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Semi rigid 40mm (forty milimetre) dia PVC waste pipes for sink or wash basin including waste fittings complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore 45cm length uplasticised PVC connection pipe with brass unions of Finolex make as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) dia nominal bore with G.I. Union of Finolex make in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass of preferred make Atul Modi Guard Golden fish with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass long nose bib cock Zoloto, Sant, L&K, Leader make conforming to IS standards (cat no.CON-107KN) complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore C.P. brass long nose bib cock Zoloto, Sant, L&K, Leader make conforming to IS standards (cat no.OPP-15037PM) complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Swan neck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaguar make complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. .

Providing and fixing OPP-15001PM Pillar cock of Jaguar make complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. .

Providing and fixing Angular stop cock with wall flange of opel prime no. CON-150083KN stop cock make of Zoloto, Sant, L&K, Jaquar complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Concealed stop cock with wall flange of opel prime no. CON-083FTK stop cock make of Zoloto, Sant, L&K, Jaquar complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Angular stop cock with wall flange of opel prime no. CON-15053PM stop cock make of Zoloto, Sant, L&K, Jaquar complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Angular stop cock with wall flange of opel prime no. CON-053PM stop cock make of Zoloto, Sant, L&K, Jaquar complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing CP mixture for Kitchen sink with casted swinging CON-309KN of jaquar complete upto all floor level.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Soap dish recessed type stainless steel AHS-1531 make of Jaquar complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Soap dish recessed type stainless steel CAN-1131 make of Jaquar complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing towel rack with lower hanger no. AHS-1581H of hotelier series make of Jaquar complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing corner glass shelf with bract no.CAN-1173 of hotelier series make of Jaquar complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glass shelf 550mm (five hundred fifty millimeter) long with C.P. brass brackets and guard rail no. AQN-7771 make of Jaquar complete fixed with CP brass screws, rail plugs etc., complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing shaped wall mounted rail with CP brass bracket and guard rail no.B2210107 and wall Mounted Grab Bar 600mm (six hundred) long CAT no.B2210106 make of Jaquar complete complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimeter) dia C.P. / S.S. Jet with flexible tube upto 1(one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) nominal boregun metal gate valve with C.I. wheel of Leader, Zoloto, Kilburn, CIM, Valves, Sant (screwed end) complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) nominal bore gun metal gate valve with C.I. wheel of Leader, Zoloto, Kilburn, CIM, Valves, Sant (screwed end) complete upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia nominal bore with G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) dia nominal bore with G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia nominal bore with G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make triple layer (1000 liter or 2000 liter each capacity) complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal ball valve (brass) of approved qualiy make of Zoloto, Sant, L&K, Leader High or low pressure, with plastic floats complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm(one hundred ten millimeter) PVC spigot and socket soil waste and ventilating pipes of 6.00 kg (six kilogramme)pressure of vectus/phenolex or equivalent make caulked joints to be measured and paid for havy working /Per square meter separately including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 150mm(one hundred fifty millimeter) PVC spigot and socket soil waste and ventilating pipes of 6.00 kg (six kilogramme)pressure of vectus/phenolex or equivalent make caulked joints to be measured and paid for havy working /Per square meter separately including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 110 mm x 90 mm (one hunderd ten into ninty millimeter) PVC floor traps ISI marked make of FINOLEX of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hunderd ten millimeter) PVC door bend with oval acces door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked make of FINOLEX complete upto all floor levelincluding fixing with approved adhesive etcetera complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hunderd fifty millimeter) PVC door bend with oval acces door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked make of FINOLEX complete upto all floor levelincluding fixing with approved adhesive etcetera complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing110mm(one hundred ten milimeter) PVC plain bend ISI marked i/c fixing with approved adhesive etc complete. Victeous / finolex or D-Plast make (High Pressure) complete in all respect.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt

Providing and fixing150mm(one hundred fifty milimeter) PVC plain bend ISI marked i/c fixing with approved adhesive etc complete. Victeous / finolex or D-Plast make (High Pressure) complete in all respect.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt

Providing and fixing110mm(one hundred ten milimeter) PVC plain double equal branch bend ISI marked i/c fixing with approved adhesive etc complete. Victeous / finolex or D-Plast make (High Pressure) complete in all respect.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt

Providing and fixing150mm(one hundred fifty milimeter) PVC plain double equal branch bend ISI marked i/c fixing with approved adhesive etc complete. Victeous / finolex or D-Plast make (High Pressure) complete in all respect.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt

Providing and fixing 110 mm (one hunderd ten millimeter) PVC single equal branch with oval access door, ISI marked make of FINOLEX insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (one hunderd fifty millimeter) PVC single equal branch with oval access door, ISI marked make of FINOLEX insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) PVC collars in all floor level ISI marked make of FINOLEX make including fixing with approved adhesive etcetera complete, upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (one hunderd fifty millimeter) PVC collars in all floor level ISI marked make of FINOLEX make including fixing with approved adhesive etcetera complete, upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hunderd ten millimeter) dia PVC clamps ISI marked make of FINOLEX a of approved design with steel screws and rawal plugs etcetera complete upto all floor level , including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hunderd fifty millimeter) dia PVC clamps ISI marked make of FINOLEX a of approved design with steel screws and rawal plugs etcetera complete upto all floor level , including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded/ crushed stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded/crushed stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 graded/ crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) With Sewer bricks conforming to IS : 4885 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100mm (one hundred millimeter) diameter and 1.20 m long complete as per standard design, including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing rectangular shape 600x450 mm (Six hundred into four hundred fifty millimeter) internal dimensions in position pre-cast RCC manhole cover and frame of required shape and approved quality as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Circular shape 450 mm (four hundred fifty millimeter) internal dimensions in position pre-cast RCC manhole cover and frame of required shape and approved quality as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Chander Kumar

SUPER CONSTRUCTION