DEVELOPMENT OF LORD SHIVA TEMPLE PREMISES AT TARAPUR NEAR TELDIHA TEMPLE UNDER MUNGER DISTRICT

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LIMITED

Technical Sheet

Name of Work DEVELOPMENT OF LORD SHIVA TEMPLE PREMISES AT TARAPUR NEAR TELDIHA TEMPLE UNDER MUNGER DISTRICT Cost of Work as per BOQ(Rs in Lakhs) Time of Completion in months 12 ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Sactioned Amount 298845000 Date of Sanction 2025-08-07T00:00:00Z Date of Tender 2026-02-03T00:00:00Z

Sl No. Items Requirement Cl. No. Name of the Contractor

Address of the Contractor

1 Registration No.

2 Bid Validity Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive 120 Days 15.1 Bid validity periods In days

3 Bid Security (A) Online mode i.e. internet payment gateway (credit/ debit card), Net Banking, NEFT/ RTGS 16.1 Amount To be entered (Rs in Lakhs)

(B) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement. Amount To be entered (Rs in Lakhs)

Bid Security Amount - (Rs. In Lakhs) 15.17 Bid Security Amount - Rs.

4 (i) Legal Status of Bidder. 4.3(a)

(ii) Place of Registration.

(iii) Principal place of Business

(iv) Power of attorney of signatory Bid Attached or Not 4.2(iv)

5 Total value of civil engineering construction work performed in last five years. 1. Annual Financial Turn Over usually not less than 50 % of the estimated annual payments under the contract (Rs in Lakhs) APPENDIX to ITB

2020-21 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.469

2021-22 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.36

2022-23 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.26

2023-24 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.166

2024-25 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.08

6 Work Experience of Similar nature Satisfactory completed atleast one similar work of value not less than 50 % of estimated value of contract (Rs in Lakhs) 4.5 (b) Amount To be entered (Rs in Lakhs)

7 Minimum Quantities of work done as prime contractor in any one year during last five years. Items Unit Total Quantity 4.5 ( c )

Brick Work cum 246.46 Value to be entered in unit cum

Electrical Works Rs. 3755599.5 Value to be entered in Rs.

PHE Work Rs. 1764881.7 Value to be entered in Rs.

PCC&RCC cum Value to be entered in unit cum

Steel KG 50934.88 Value to be entered in KG

Excavation cum 927.769 Value to be entered in unit cum

8 Bidding Capacity More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period (Rs in Lakhs) 4.4

9 (a) Existing commitments and ongoing works Amount To be entered (Rs in Lakhs)

(b) Work for which Bid already submitted Amount To be entered (Rs in Lakhs)

10 Availability of key items of Contractor's Equipment Type of Equipment/Maximum age No. Required Nos. Max. Age Page-17 Nos./ Max. Age

Front end Loader 1

Plate Vibrator 2

Niddle Vibrator 2

Steel shuttering 2500sft 5 to 7

Concrete Mixture 1

11 Key Personnel Personnel/Qualification/Contract Package Size (Rs. 10 to 30 Crore) Page-18 Name of the Personnel and Experince in years

Project Manager/ B.E. Civil + 10 Years Exp. (5 years as Manager) or retired E.E. 1 No.

Site Engineer/ B.E. Civil + 07 Years Exp. (3 years in Building Construction) or retired A.E. 1 No.

Plant Engineer/ B.E. Civil + 05 Years Exp. or Dip. Electrical + 07 Years Exp. or Retired J.E. 1 No.

Site Supervisor/ Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. or retired I.T.I Holder. 2 Nos.

12 Evidence of accesses to Financial Resources Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (Not more than 3 months old). (Rs in Lakhs). 4.2(i) Amount To be entered (Rs in Lakhs)

13 Proposed methodology and programme of construction. Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. (Attached or not) 4.3(l)

14 Litigation History Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)

15 Affidavit Regarding statements made in the required attachments are true and correct. Page-24

16 Undertaking Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. (Rs in Lakhs). 4.2(ii)

17 NOC for Debar (Affidavit)

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LTD.

(A GOVERNMENT OF BIHAR UNDERTAKING)

DEVELOPMENT OF LORD SHIVA TEMPLE PREMISES AT TARAPUR NEAR TELDIHA TEMPLE UNDER MUNGER DISTRICT

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Mobile Number

NIT - 56/E-TENDER/ BSTDC/SBD/2025-26

Sl No. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 75,805,132.00

2 Total Non-Schedule Amount (Rs.) To be Quoted !

TOTAL AMOUNT Rs. 101,292,530.00

BOQ SOR For Development Of Lord Shiva Statue Park At Tarapur, Near Teldiha Temple.

S.No Sor Code Description of Items Unit Total Quantity Rate Total Amount

In Digit In Words

CIVIL SOR ITEMS (A)

1 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 All Kinds of soil Cum 1855.54 314.90 Rupees Three Hundred Fourteen and Ninety Paise Only 584308.99

2 2.25(A) Excavating, supplying and filling of local earth (including royalty butexcluding cairriage cost) by mechanical transport upto a lead of 3kmalso including ramming and watering of the earth in layers notexceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. Cum 61.10 411.70 Rupees Four Hundred Eleven and Seventy Paise Only 25155.28

3 2.25 Pumping out water caused by springs, tidal or river seepage, brokenwater mains or drains and the like. KI 107.20 Rupees One Hundred Seven and Twenty Paise Only

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm in depth:consolidating each deposited layer by ramming and watering lead Cum 28241.36 123.90 Rupees One Hundred Twenty Three and Ninety Paise Only 3499104.53

5 2.28 Supplying and Filling in plinth with local sand and under floors including,watering, ramming consolidating and dressing complete. Cum 131.13 287.30 Rupees Two Hundred Eighty Seven and Thirty Paise Only 37672.36

2.37 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONALanti-termites' treatrnent(including the cost of chemical emulsion)

2.37.1 Along external wall where the apron is not provided usingchemical imulsion @ 7.5 liters / sqm of the vertical surfaceof the substructure to a depth of 300 mm includingexcavation channel along the wall & rodding etc. complete:

6 2.37.1.1 With chlorpyriphos/Lindone E.C. 20% with 1% concentration Meter 1146.80 39.90 Rupees Thirty Nine and Ninety Paise Only 45757.32

2.37.2 Along the external wall below concrete or masonry apronusing chemical emulsion @ 2.55 litres per linear metreincluding drilling and plugging holes etc.

7 2.37.2.1 With chlorpyriphos E.C. 20% with 1% concentration Meter 1146.80 49.10 Rupees Forty Nine and Ten Paise Only 56307.88

2.37.3 Treatment of soil under existing floors using chemicalemulsion @ one litre per hole, 300 mm apart includingdrilling and plugging 12 mm diameter holes with cementmortar 1:2 (1 cement: 2 coarse sand) to match the existingfloor.

8 2.37.3.1 With Chlorpyriphos EC 20% with 1% concentration Sqm 67.89 241.20 Rupees Two Hundred Forty One and Twenty Paise Only 16375.07

20.20 Boring, providing and installing bored cast-in-situ reinforcedcement concrete piles of grade M-25 of specified diameter andlength below the pile cap, to carry a safe working load not lessthan specified, excluding the cost of steel reinforcement butincluding the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).

9 20.2.2 400 mm dia piles Meter 1163.30 Rupees One Thousand One Hundred Sixty Three and Thirty Paise Only

4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.5 1.3.6 (1 Cement :4 coarse sand :8 graded stone agregate 40 mmnominal size) Cum 1420.39 3434.00 Rupees Three Thousand Four Hundred Thirty Four Only 4877602.16

10 4.1.8 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mmnominal size) Cum 20.56 2975.20 Rupees Two Thousand Nine Hundred Seventy Five and Twenty Paise Only 61180.08

11 4.1.2 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cum 4420.80 Rupees Four Thousand Four Hundred Twenty and Eighty Paise Only

5.1 Providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centring,shuttering,finishing andreinforcement-All work puto plinth level

12 5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cum 7.74 4688.30 Rupees Four Thousand Six Hundred Eighty Eight and Thirty Paise Only 36287.44

5.33 B Add or deduct for providing richer or leaner mixes respectively at all floorlevels.

13 5.33 B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cum 164.50 Rupees One Hundred Sixty Four and Fifty Paise Only

5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

5.33.1. All works up to plinth level

14 5.33.1.1 Concrete of M-25 grade with minimum cement content of 350kg/cum Cum 729.25 5063.40 Rupees Five Thousand Sixty Three and Forty Paise Only 3692504.50

5.33.1.2 Concrete of M-30 grade with minimum cement content of 350kg/cum Cum 5189.10 Rupees Five Thousand One Hundred Eighty Nine and Ten Paise Only

5.33.2 All work above Plinth level upto floor V Level.

15 5.33.2.1 Concrete of M-25 grade with minimum cement content of 350kg/cum Cum 251.26 5863.20 Rupees Five Thousand Eight Hundred Sixty Three and Twenty Paise Only 1473179.89

5.33.2.2 Concrete of M-30 grade with minimum cement content of 350kg/cum Cum 5989.00 Rupees Five Thousand Nine Hundred Eighty Nine Only

16 5.50 Reinforced cement concrete work in arhes, archribs, domes, vaults, shells, folded plate and roofs having slope more than 150 upto floor fivelevel excluding the cost of centring. Shuttering. Finishing and reinforement with 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size) Cum 5677.10 Rupees Five Thousand Six Hundred Seventy Seven and Ten Paise Only

5.9 Centring and shuttering including strutting,propping etc. and removal ofform for.

17 5.9.1 Foundations, footings, bases of columns etc. for massconcrete. Sqm 1366.77 211.60 Rupees Two Hundred Eleven and Sixty Paise Only 289208.53

18 5.9.2 Walls (any thickness) including attached pilasters.Butteresses, plinth and string courses etc. Sqm 375.10 Rupees Three Hundred Seventy Five and Ten Paise Only

19 5.9.3 Suspended floors, roots, landings, balcnies and accessplatform. Sqm 142.19 437.50 Rupees Four Hundred Thirty Seven and Fifty Paise Only 62207.03

20 5.9.5 Lintels, beams, plinth bams, griders, bressumers andcontilevers. Sqm 1667.68 404.70 Rupees Four Hundred Four and Seventy Paise Only 674910.10

21 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts Sqm 1645.06 494.40 Rupees Four Hundred Ninety Four and Forty Paise Only 813315.69

22 5.9.7 Stairs,(excluding landings) except spiral-staircaces. Sqm 439.90 Rupees Four Hundred Thirty Nine and Ninety Paise Only

23 5.9.9 Arches,domes,vaults upto 6m span Sqm 1128.60 Rupees One Thousand One Hundred Twenty Eight and Sixty Paise Only

24 5.9.19 Weather shade,Chajjas, corbels etc. including edges Sqm 114.72 550.90 Rupees Five Hundred Fifty and Ninety Paise Only 63199.25

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete.

25 5.22.7.A Thermo-Mechanically Treated bars TMTC-500-8mm dia. Kg 19862.07 94.50 Rupees Ninety Four and Fifty Paise Only 1876965.65

26 5.22.7.B Thermo-Mechanically Treated bars TMTC-500-10mm dia. Kg 25893.04 92.60 Rupees Ninety Two and Sixty Paise Only 2397695.73

27 5.22.7.C Thermo-Mechanically Treated bars TMTC-500-12mm dia. Kg 18965.74 90.80 Rupees Ninety and Eighty Paise Only 1722088.97

28 5.22.7.D Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. Kg 25131.71 91.70 Rupees Ninety One and Seventy Paise Only 2304577.77

29 5.22.7.E Thermo-Mechanically Treated bars TMT Fe-500-20mrn dia. Kg 6008.60 91.70 Rupees Ninety One and Seventy Paise Only 550988.58

30 5.22.7.f Thermo-Mechanically Treated bars TMT Fe-500-25mrn dia. Kg 6008.60 91.70 Rupees Ninety One and Seventy Paise Only 550988.58

6.1A Brick work with bricks of class designation 100A in foundations and plinth in

31 6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) Cum 453.14 4819.90 Rupees Four Thousand Eight Hundred Nineteen and Ninety Paise Only 2184087.08

32 6.3A Extra tor Brick work in superstructure above plinth level upto floor V cum Cum 294.11 842.20 Rupees Eight Hundred Forty Two and Twenty Paise Only 247696.49

33 6.15 A Brick work in plain arches in superstructure including centring andshuttering complete for span upto 6 metres with bricks of classdesignation 100A in cement mortar 1:3(1 cement:3 coarse sand ) Cum 8355.10 Rupees Eight Thousand Three Hundred Fifty Five and Ten Paise Only

34 6.41A Brick work with selected bricks of class designation 100A in exposedbrick work including making horizontal and vertical irooves 10mm wide12mm deep complete from ground level up to plinth level in cementmortars 1:6(1 cement: 6 corse sand) Cum 39.79 4925.20 Rupees Four Thousand Nine Hundred Twenty Five and Twenty Paise Only 195961.40

35 6.41A Extra for exprosed brick work in superstructure above plinth level andupto floor level. 0.75 x 1.5 = 1.13 Cum 39.79 1068.00 Rupees One Thousand Sixty Eight Only 42493.05

7.40.1 Providing and fixing dry cladding upto 10 metre heights with 30 mm thickgang saw cut stone with (machine cut edges) of uniform colour and sizeupto 1mx1m, fixed to structural steel frame work and / or with the help ofcramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid forseparately.) Red sand stone Sqm 2951.00 Rupees Two Thousand Nine Hundred Fifty One Only

7.41 Providing and fixing structural steel frame (for dry cladding with 30 mmthick gang saw cut with machine cut edges sand stone) on walls at allheights using M.S. square / rectangular tube in the required pattern as perarchitectural drawing, including cost of cutting, bending, welding etc. Theframe work shall be fixed to the wall with the help of MS brackets / lugs ofangle iron / flats etc. which shall be welded to the frame and embedded inbrick wall with cement concrete block 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) of size 300x230x300 mm,including cost of necessary centring and shuttering and with approvedexpansion hold fasteners on CC/RCC surface, including drilling necessaryholes. Approved cramps / pins etc. shall be welded to the frame work tosupport stone cladding, the steel work will be given a priming coat of Zincprimer as approved by Engineer-in-Charge and painted with two or morecoats of epoxy paint (Shop drawings shall be submitted by the contractor tothe Engineer-in-Charge for approval before execution). The frame workshall be fixed in true horizontal & vertical lines/planes. (Only structural steelframe work shall be measured for the purpose of payment, stainless steelcramps shall be paid for separately and nothing extra shall be paid.) Per Kg 160.70 Rupees One Hundred Sixty and Seventy Paise Only

7.42 Providing and fixing adjustable stainless steel cramps of approved quality,required shape and size,adjustable with stainless steel nuts, bolts andwasher (total weight not less than 260 gms), for dry stone cladding fixed onframe work at suitable location, including making necessary recesses instone slab, drilling required holes etc complete as per direction of theEngineer-in-charge Nos 265.00 Rupees Two Hundred Sixty Five Only

36 8.2.2 Providingand fixing18mmthickgangsawcut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of requiredsize,approvedshade, colourandtexture laidover20mm thick base cementmortar 1:4 (1 cement : 4coarse sand), joints treatedwithwhite cement, mixedwithmatching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm Sqm 5.42 4401.20 Rupees Four Thousand Four Hundred One and Twenty Paise Only 23872.11

8.3.2 Providingedgemoulding to18mmthickmarblestonecounters, vanitiesetc., includingmachinepolishingtoedgetogivehighgloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Meter 260.10 Rupees Two Hundred Sixty and Ten Paise Only

8.11.1 Providing and fixing machine cut, mirror / eggshell polished , Marblestone work for wall lining (veneer work) including dado, skirting,risers of steps etc., in required design and pattern whereverrequired,stones of different finished surface texture, on 12 mm(average) thick cement mortar 1:3 (1 cement :3 coarse sand) laidand jointed with white cement slurry @ 3.3 kg/sqm including pointingwith white cement slurry admixed with pigment of matching shade,including rubbing, curing, polishing etc. all complete as perArchitectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. Sqm 7305.90 Rupees Seven Thousand Three Hundred Five and Ninety Paise Only

9.10 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs orwith dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

37 9.1.1 Second class teak wood Cum 120526.60 Rupees One Lakh Twenty Thousand Five Hundred Twenty Six and Sixty Paise Only

38 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 639.40 Rupees Six Hundred Thirty Nine and Forty Paise Only

9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

39 9.20.1 35 mm thick including stainless steel butt hinges withnecessary screwssqm Sqm 2845.60 Rupees Two Thousand Eight Hundred Forty Five and Sixty Paise Only

9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

40 9.48.1 Fixed to steel windows by welding Kg 144.50 Rupees One Hundred Forty Four and Fifty Paise Only

9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc Kg 161.10 Rupees One Hundred Sixty One and Ten Paise Only

9.73 Providing and fixing bright finished brass parliamentary hinges withnecessary screws etc. complete:

41 9.73.1 250x10mm Each 381.60 Rupees Three Hundred Eighty One and Sixty Paise Only

9.74 Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete:

42 9.74.1 250x10mm Each 369.40 Rupees Three Hundred Sixty Nine and Forty Paise Only

43 9.81.1 Providing and fixing bright finished brass handles with screws etc.complete: 125 mm Each 202.10 Rupees Two Hundred Two and Ten Paise Only

44 9.82 Providing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. Each 108.10 Rupees One Hundred Eight and Ten Paise Only

45 9.83 Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Each 979.50 Rupees Nine Hundred Seventy Nine and Fifty Paise Only

10.6 Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside lockingwith push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. topcover of required thickness for rolling shutters.

45 10.6.1 80x1.25mmM.S. Laths with 1.25mm thick top cover. Sqm 2673.70 Rupees Two Thousand Six Hundred Seventy Three and Seventy Paise Only

46 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes,channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing withnecessary accessories & stainless steel dash fasteners , stainless steelbolts etc., of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, ( forpayment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 1277.07 546.80 Rupees Five Hundred Forty Six and Eighty Paise Only 698301.88

47 10.43 Providing and fixing concertina coil fencing with punched tape concertinan coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbedtape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Meter 272.60 Rupees Two Hundred Seventy Two and Sixty Paise Only

11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand)

48 11.26.1 20 to 25 mm thick - Sqm 68.71 1252.70 Rupees One Thousand Two Hundred Fifty Two and Seventy Paise Only 86066.75

11.41A.2 Glazed vitrified floor tiles polished finish of size

11.41A.2.3 Size of Tile 800 x 800 mm Sqm 1287.40 Rupees One Thousand Two Hundred Eighty Seven and Forty Paise Only

11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement& matching pigments etc. complete.

49 11.46.2 Size of Tile 600 x 600 mm. Sqm 1191.80 Rupees One Thousand One Hundred Ninety One and Eighty Paise Only

11.46.3 Size of Tile 800 x 800 mm. Sqm 1658.00 Rupees One Thousand Six Hundred Fifty Eight Only

50 11.52 Providing and laying machine cut, mirror polished Marble stoneflooring, in required design (Simple geometrical, abstract etc.) and inpatterns in combination with Italian marble stones of different colours,shades and finished surface texture etc., in linear portions of thebuilding, all complete as per the shades and finished surface textureetc., in linear portions of the building, all complete as per thearchitectural drawings, with 18 mm thick stone slab laid over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)laid and jointed with white cement slurry @ 4.4 kg/sqm includingpointing with white cement slurry admixed with pigment to match themarble shade including rubbing , curing and polishing etc. all completeas specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, FireRed or Dark Emperadore etc. Sqm 5908.40 Rupees Five Thousand Nine Hundred Eight and Forty Paise Only

51 8.14.2.4 Stone work (machine cut edges) for wall lining etc. (veneer work)upto 10 metre height, backing filled with a grout of average 12 mmthick cement mortar 1:3 (1 cement : 3 coarse sand) includingpointing in white cement mortar 1:2 (1 white cement : 2 stone dust)with an admixture of pigment matching the stone shade : (To besecured to the backing and the sides by means of cramps and pinswhich shall be paid for separately) : Red sand stone - Exposed face machine cut and tablerubbed with rough backing 40 mm thick Sqm 3488.20 Rupees Three Thousand Four Hundred Eighty Eight and Twenty Paise Only

52 11.30.1 40 mm thick fine dressed stone flooring over 20 mm (average) thickbase with joint finished fiush:base 1:5 (1 cement: 5 coarse sand )withjoints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2stone dust) admixed with pigment to match the shade of stone andpointing with same mortar. Red Sand Stone Sqm 13728.62 849.20 Rupees Eight Hundred Forty Nine and Twenty Paise Only 11658344.27

53 10.32.2 Steel work welded in built up sections/framed worK including cuttinghoisting, rixing in position and applying a priming coat of approved steelprimer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. gates &similar works. Kg 855.00 114.60 Rupees One Hundred Fourteen and Sixty Paise Only 97983.00

54 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillarslaid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarsesand ) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slab including rubbing and polishing complete. Detailsof cost for 10 sqm Sqm 5.94 1334.90 Rupees One Thousand Three Hundred Thirty Four and Ninety Paise Only 7929.31

55 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (Thickness to be specified by the manufacture) of approvedmake in all colours, shades except burgundy , bottle green , black ofany size as approved by Engineer-in-charge in skirting , risers of stepsand dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqmincluding pointing in white cement mixed with pigment of matchingshade complete. Sqm 795.00 Rupees Seven Hundred Ninety Five Only

56 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of E/l, Sqm 14250.02 283.30 Rupees Two Hundred Eighty Three and Thirty Paise Only 4037031.01

57 11.79.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’sspecifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern. Sqm

58 11.55.1 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 2147.70 Rupees Two Thousand One Hundred Forty Seven and Seventy Paise Only

59 12.33A Providing and laying pressed clay tiles (as per approved pattern20 mm nominal thickness and of approved size) on roofs jointedwith cement mortar 1:4(1 cement :4 coarse sand )mixed with 2%integral water proofing compound laid over a bed of 20 mm thickcement mortar 1:4(1 cement::4 coarse sand )and finished neatcomplete Sqm 57.36 490.30 Rupees Four Hundred Ninety and Thirty Paise Only 28123.61

13.11 Cement plaster in course sand

12 mm cement plaster of mix:

60 13.11.2 1:4(1 cement :4 coarse sand)Interior Plaster Sqm 229.82 152.90 Rupees One Hundred Fifty Two and Ninety Paise Only 35138.71

61 13.20 18 mm cement plaster in two coats under layer 12 mm thick cementplaster 1:5 (1 cement :5 coarse sand) and top layer 6 mm thick,cement plaster 1:3 (1 cement: 3 coarse sand) finished rough withsponge. Sqm 1650.90 227.40 Rupees Two Hundred Twenty Seven and Forty Paise Only 375414.66

13.24 6 mm cement plaster to ceiling of mix : 67.89 0.00

62 13.24.2 1:4(1 cement: 4 coarse sand) Sqm 67.89 125.60 Rupees One Hundred Twenty Five and Sixty Paise Only 8526.98

63 13.39.1 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat Sqm 287.40 Rupees Two Hundred Eighty Seven and Forty Paise Only

64 13.80 A.2 Providing and applying white cement based putty of averagethickness 2 mm, of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smoothcomplete. Sqm 147.30 105.40 Rupees One Hundred Five and Forty Paise Only 15525.42

65 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Sqm 204.66 86.40 Rupees Eighty Six and Forty Paise Only 17682.62

13.48 Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of requiredshade (Company Depot Tinted) with silicon additives.

66 13.48A.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sqm 112.00 Rupees One Hundred Twelve Only

13.45.1 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm Sqm 215.20 Rupees Two Hundred Fifteen and Twenty Paise Only

67 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade concrete in position etc all complete job. Cum 12.98 7998.80 Rupees Seven Thousand Nine Hundred Ninety Eight and Eighty Paise Only 103815.63

68 16.87.2 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineerin-Charge. With granite stone of all colour except black, cherry/ruby red of area more than 0.50 sqm. Sqm 3686.50 Rupees Three Thousand Six Hundred Eighty Six and Fifty Paise Only

69 16.94 Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge Cum 3007.70 Rupees Three Thousand Seven and Seventy Paise Only

16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

70 16.78.1 With material conforming to Grade-I (size range 75mm to 0.075 mm) having CBR Value-30 Cum 476.59 1310.40 Rupees One Thousand Three Hundred Ten and Forty Paise Only 624527.99

71 16.78.2 With material conforming to Grade-II (size range 53mm to 0.075 mm ) having CBR Value-25 Cum 238.30 1239.40 Rupees One Thousand Two Hundred Thirty Nine and Forty Paise Only 295344.93

20.60 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loadingplatform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.

72 20.6.1.1 Initial test Per Test 51510.60 Rupees Fifty One Thousand Five Hundred Ten and Sixty Paise Only

73 20.6.1.2 Routine test Per Test 18463.50 Rupees Eighteen Thousand Four Hundred Sixty Three and Fifty Paise Only

74 22.8.1 Providing and laying integral cement based water proofing treatmentincluding prepatation of surface as required for treatment of roofs,balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary theadjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge With average thickness of 120 mm and minimum thickness atkhurras point to be 65 .. Sqm 850.70 Rupees Eight Hundred Fifty and Seventy Paise Only

17.28.1 Semi rigid pipe

75 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment).. Cum 26437.66 143.50 Rupees One Hundred Forty Three and Fifty Paise Only 3793804.50

A Stone Chips Cum 1945.55 2731.18 Rupees Two Thousand Seven Hundred Thirty One and Eighteen Paise Only 5313639.07

B Coarse Sand Cum 1024.78 1765.61 Rupees One Thousand Seven Hundred Sixty Five and Sixty Paise Only 1809358.09

D Local Sand Cum 131.13 322.81 Rupees Three Hundred Twenty Two and Eighty One Paise Only 42328.99

D' Earth Cum 26437.66 322.81 Rupees Three Hundred Twenty Two and Eighty One Paise Only 8534415.86

E Bricks 1000 Nos 811.68 952.00 Rupees Nine Hundred Fifty One and Ninety Nine Paise Only 772711.02

77 Difference of cost

F Cement Tonn 955.91 111.27 Rupees One Hundred Eleven and Twenty Seven Paise Only 106368.07

G Bricks 1000 Nos 811.68 365.61 Rupees Three Hundred Sixty Five and Sixty One Paise Only 296760.36

Total Amount SOR (A) After Applying GST Impact factor 1.0536 70764869.36

PHE SOR ITEMS (B)

A SANITARY INSTALLATION

17.10 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

78 17.1.1 White Vitreous china Orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests. Each 4.00 4470.90 Rupees Four Thousand Four Hundred Seventy and Ninety Paise Only 17883.60

17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

79 17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 4.00 5504.30 Rupees Five Thousand Five Hundred Four and Thirty Paise Only 22017.20

80 17.40 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions G.I. clamps, complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 2.00 5733.30 Rupees Five Thousand Seven Hundred Thirty Three and Thirty Paise Only 11466.60

81 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:

83 17.10.1. Kitchen sink with drain board

84 17.10.1.4 510x1040mm bowl depth 178mm Each 5231.50 Rupees Five Thousand Two Hundred Thirty One and Fifty Paise Only

8.10 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.

82 8.10.1 White Agaria Marble Stone Sqm 1.50 3061.20 Rupees Three Thousand Sixty One and Twenty Paise Only 4591.80

85 17.28 Provding and fixing PVC waste pipe for sink & wash basin including PVC waste fittings complete

17.28.2 Semi rigid pipe

86 17.28.2.2 40 mm dia Each 4.00 104.40 Rupees One Hundred Four and Forty Paise Only 417.60

87 17.34 Provding and fixing Toilet Paper.holder

17.34.2 Vitreous china Each 4.00 332.90 Rupees Three Hundred Thirty Two and Ninety Paise Only 1331.60

88 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Each 12.00 146.30 Rupees One Hundred Forty Six and Thirty Paise Only 1755.60

89 17.72 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 4.00 204.70 Rupees Two Hundred Four and Seventy Paise Only 818.80

90 17.31 Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete. Each 12.00 1068.50 Rupees One Thousand Sixty Eight and Fifty Paise Only 12822.00

91 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20 mm Nominal outer dia pipes Metre 20.00 233.90 Rupees Two Hundred Thirty Three and Ninety Paise Only 4678.00

18.7.3 25 mm Nominal outer dia pipes Metre 52.00 317.30 Rupees Three Hundred Seventeen and Thirty Paise Only 16499.60

18.7.4 32 mm Nominal outer dia pipes Metre 36.00 395.20 Rupees Three Hundred Ninety Five and Twenty Paise Only 14227.20

18.7.5 40 mm Nominal outer dia pipes Metre 76.00 538.40 Rupees Five Hundred Thirty Eight and Forty Paise Only 40918.40

18.7.6 50 mm Nominal outer dia pipes Metre 791.00 Rupees Seven Hundred Ninety One Only

92 18.80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

18.8.1 15 mm Nominal outer dia pipes Metre 16.00 278.20 Rupees Two Hundred Seventy Eight and Twenty Paise Only 4451.20

18.8.2 20 mm Nominal outer dia pipes Metre 68.00 350.80 Rupees Three Hundred Fifty and Eighty Paise Only 23854.40

18.8.3 25 mm Nominal outer dia pipes Metre 30.00 463.10 Rupees Four Hundred Sixty Three and Ten Paise Only 13893.00

18.8.4 32 mm Nominal outer dia pipes Metre 549.80 Rupees Five Hundred Forty Nine and Eighty Paise Only

93 18.90 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.3 25 mm nominal outer dia pipes Metre 294.70 Rupees Two Hundred Ninety Four and Seventy Paise Only

18.9.4 32 mm nominal outer dia pipes Metre 24.00 359.10 Rupees Three Hundred Fifty Nine and Ten Paise Only 8618.40

18.9.5 40 mm nominal outer dia pipes Metre 12.00 477.60 Rupees Four Hundred Seventy Seven and Sixty Paise Only 5731.20

18.9.6 50 mm nominal outer dia pipes Metre 730.30 Rupees Seven Hundred Thirty and Thirty Paise Only

94 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions.

18.21.2 45 cm length

18.21.2.1 15 mm Nominal bore Each. 22.00 85.20 Rupees Eighty Five and Twenty Paise Only 1874.40

95 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality.

18.17.1A 20 mm Nominal bore Each. 2.00 465.40 Rupees Four Hundred Sixty Five and Forty Paise Only 930.80

18.17.1 25 mm Nominal bore Each. 8.00 532.30 Rupees Five Hundred Thirty Two and Thirty Paise Only 4258.40

18.17.2 32 mm Nominal bore Each. 2.00 589.90 Rupees Five Hundred Eighty Nine and Ninety Paise Only 1179.80

18.17.3 40 mm Nominal bore Each. 6.00 707.30 Rupees Seven Hundred Seven and Thirty Paise Only 4243.80

18.17.4 50 mm Nominal bore Each. 878.20 Rupees Eight Hundred Seventy Eight and Twenty Paise Only

96 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end).

18.19.2 32mm nominal bore

18.19.2.2 Vertical Each. 777.90 Rupees Seven Hundred Seventy Seven and Ninety Paise Only

18.19.3 40 mm Nominoal Bore

18.19.3.2 Vertical Each 2.00 1049.20 Rupees One Thousand Forty Nine and Twenty Paise Only 2098.40

C.P. BRASS FITTINGS

97 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931.

18.49.1 15 mm Nominal bore Each 8.00 434.20 Rupees Four Hundred Thirty Four and Twenty Paise Only 3473.60

98 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

18.50.1 15 mm Nominal bore Each 2.00 715.10 Rupees Seven Hundred Fifteen and Ten Paise Only 1430.20

99 18.53 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

18.53.1 15 mm Nominal bore Each 10.00 500.40 Rupees Five Hundred and Forty Paise Only 5004.00

100 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating Each 12.00 169.70 Rupees One Hundred Sixty Nine and Seventy Paise Only 2036.40

101 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

18.22.1 100 mm diameter Each 2.00 166.30 Rupees One Hundred Sixty Six and Thirty Paise Only 332.60

102 18.52 Providing and fixing C.P. brass stop cock ( concealed ) of standard design & of approved make conforming to IS 8931.

18.52.1 15 mm Nominal bore Each 2.00 594.80 Rupees Five Hundred Ninety Four and Eighty Paise Only 1189.60

103 18.33 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 100 A Each 2.00 7210.60 Rupees Seven Thousand Two Hundred Ten and Sixty Paise Only 14421.20

104 18.48 Providing and placing on terrace polythethylene water storage tank ISI. :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (2000x2=4000) per litre 4000.00 9.70 Rupees Nine and Seventy Paise Only 38800.00

105 Derived (Drains) Supplying materials, labour for constructing Rcc drains of following sizes & as per sections given in the Drawings & Designs, all complete as per specifications and direction of Engineer-in-charge.

Drain type-D1 Rectangular Section, Width 350 mm x 500 mm Avg Deep (varying from 400 to 600 mm) Meter 350.00 5089.97 Rupees Five Thousand Eighty Nine and Ninety Seven Paise Only 1781489.50

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 97.20 391.70 Rupees Three Hundred Ninety One and Seventy Paise Only 38073.24

106 19.01 Providing, laying and jointing glazed stoneware pipes class SP-1 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

19.1.2 150mm diameter Meter 7.20 464.30 Rupees Four Hundred Sixty Four and Thirty Paise Only 3342.96

19.02 Providing and laying cement concrete 1:5:10( 1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

19.2.2 150mm diameter S.W pipe Meter 7.20 494.40 Rupees Four Hundred Ninety Four and Forty Paise Only 3559.68

107 19.40 Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size(inside) the wt. of cover to be not less than4.50kg. And frame to not less than 2.70 kg. as/standard design

19.4.3 180x150mmsize p type

19.4.3.1 With F.P.S. bricks designation 7.5 Each 6.00 1994.10 Rupees One Thousand Nine Hundred Ninety Four and Ten Paise Only 11964.60

108 19.60 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc.

19.6.2 150 mm dia R.C.C. pipe Metr. 84.00 410.70 Rupees Four Hundred Ten and Seventy Paise Only 34498.80

19.6.3 250 mm dia R.C.C. pipe Metr. 677.40 Rupees Six Hundred Seventy Seven and Forty Paise Only

109 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:

19.7.1 Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 2.00 7914.70 Rupees Seven Thousand Nine Hundred Fourteen and Seventy Paise Only 15829.40

110 19.8 Extra for depth for manholes

19.8.1 Size 90x80cm

19.8.1.1 With F.P.S bricks class designation 75 Metre 0.20 5660.00 Rupees Five Thousand Six Hundred Sixty Only 1132.00

111 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line:

19.30.1.1 With F.P.S bricks Each 12.00 4266.80 Rupees Four Thousand Two Hundred Sixty Six and Eighty Paise Only 51201.60

112 19.31 Extra for depth beyond 45cm of brick masonry chamber:

19.31.1 For 455x610mm size

19.31.1.1 With F.P.S bricks Metre 1.20 3946.20 Rupees Three Thousand Nine Hundred Forty Six and Twenty Paise Only 4735.44

113 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With F.P.S. bricks Each 4.00 33603.40 Rupees Thirty Three Thousand Six Hundred Three and Forty Paise Only 134413.60

Derived (Septic Tanks ) Supplying materials, labour for constructing Septic Tanks of following sizes & as per sections given in the Drawings & Designs, all complete as per specifications and direction of Engineer-in-charge.

D.1 Septic tank [5.0 mtr (long) x 1.5 mtr (wide) x 2.25 mtr (deep) {of inside finished size as per design & drawings}] Each 2.00 172672.00 Rupees One Lakh Seventy Two Thousand Six Hundred Seventy Two Only 345344.00

S3 Septic tank [6.0 mtr (long) x 2.0 mtr (wide) x 2.25 mtr (deep) {of inside finished size as per design & drawings}] Each 222162.00 Rupees Two Lakh Twenty Two Thousand One Hundred Sixty Two Only

D TUBE WELL X 1 NOS.

114 24.10 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

24.1.1 All types of soil

24.1.1.1 300 mm dia Mtrs. 180.00 486.80 Rupees Four Hundred Eighty Six and Eighty Paise Only 87624.00

115 24.20 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

24.2.1 All types of soil

24.2.1.1 300 mm dia Mtrs. 60.00 567.90 Rupees Five Hundred Sixty Seven and Ninety Paise Only 34074.00

116 24.30 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.1 100 mm nominal size dia Mtrs. 90.00 546.10 Rupees Five Hundred Forty Six and Ten Paise Only 49149.00

24.3.2 150 mm nominal size dia Mtrs. 60.00 660.10 Rupees Six Hundred Sixty and Ten Paise Only 39606.00

117 24.40 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia Metre 60.00 573.10 Rupees Five Hundred Seventy Three and Ten Paise Only 34386.00

24.4.2 150 mm nominal size dia Metre 673.50 Rupees Six Hundred Seventy Three and Fifty Paise Only

118 24.6 Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge Cum 1195.60 Rupees One Thousand One Hundred Ninety Five and Sixty Paise Only

119 24.80 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cu_m 14.16 1343.20 Rupees One Thousand Three Hundred Forty Three and Twenty Paise Only 19019.71

120 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 72.00 916.80 Rupees Nine Hundred Sixteen and Eighty Paise Only 66009.60

121 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of,

24.13.2 150 mm dia each 2.00 210.70 Rupees Two Hundred Ten and Seventy Paise Only 421.40

122 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete

24.14.2 150 mm dia each 2.00 1531.40 Rupees One Thousand Five Hundred Thirty One and Forty Paise Only 3062.80

123 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I),

24.15.1 100mm dia each 2.00 228.30 Rupees Two Hundred Twenty Eight and Thirty Paise Only 456.60

24.15.2 150 mm dia each 281.80 Rupees Two Hundred Eighty One and Eighty Paise Only

E RAIN WATER PIPE

124 12.78 Providing and fixing on wall face PVC (working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.78.2 110 mm diameter Metre 16.00 257.50 Rupees Two Hundred Fifty Seven and Fifty Paise Only 4120.00

125 12.79 Providing and fixing on wall face PVC moulded fitting / accessories for rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.79.1 Coupler

12.79.1.2 110 mm Each 4.00 120.00 Rupees One Hundred Twenty Only 480.00

12.79.2 Single pushfit Coupler:

126 12.79.2.2 110 mm Each 4.00 374.60 Rupees Three Hundred Seventy Four and Sixty Paise Only 1498.40

127 12.79.5.2 110 mm bend Each 8.00 132.00 Rupees One Hundred Thirty Two Only 1056.00

128 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

12.80.2 110 mm Each 16.00 182.72 Rupees One Hundred Eighty Two and Seventy Two Paise Only 2923.52

129 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 4.00 47.90 Rupees Forty Seven and Ninety Paise Only 191.60

Total Amount SOR (B) After Applying GST Impact factor 1.0536 3220763.38

S.O.R 1.3.3 (C) Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable Cl box and earthing the point with 1.5 sq. min. FR PVC insulated copper conductor single core cable etc as required. Group C Point 80.00 1146.00 Rupees One Thousand One Hundred Forty Six Only 91680.00

1.24.1 1.24.4 Supplying and fixing 5 pin, 5/6 amps socket outlet and 5/6 amps Modular type switch connection etc up-on switch board, as required.all complete as per instructions of Elec.Er / Architect. Set 8.00 194.00 Rupees One Hundred Ninety Four Only 1552.00

1.31 Supplying and fixing 1nos Modular type 6Amp 5pin socket with 6Amps switch, Modular Plate, suitable size PVC/G.I. box as required. all complete as per instructions of Elec.Er. / Architect. Each 23.00 414.00 Rupees Four Hundred Fourteen Only 9522.00

1.56 Supplying and fixing suitable size GI box with rnodular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. Set 0.00 778.00 Rupees Seven Hundred Seventy Eight Only 0.00

S0R 1.32 Supplying and fixing 1nos Modular type 15Amp 6 pin socket with 15Amps switch, Modular Plate, suitable size PVC/G.I. box as required. all complete as per instructions of Elec.Er. / Architect. Each 20.00 531.00 Rupees Five Hundred Thirty One Only 10620.00

2.19 Supplying and fixing 20Amp 240 volts SPN MCB industrial type, power socket with 25Amp SPN MCB and 25 Amps Top in proper size steel box and plate as required. all complete as per instructions of Elec.Er. / Architect. Each 4.00 1513.00 Rupees One Thousand Five Hundred Thirteen Only 6052.00

2.32 Supplying and fixing Cable end box (Loose wire box, lP43) suitable for following pole and neutral, sheet steel, MCB distribution board, 2401415 V, on surface /recess complete with testing and commissioning etc. as required. 0.00 0.00

2.32.1 For 6 way, Double door SPN MCBDB Each 0.00 111.00 Rupees One Hundred Eleven Only 0.00

2.32.2 For 8/10 way, Double door SPN I\4CBDB Each 5.00 798.00 Rupees Seven Hundred Ninety Eight Only 3990.00

2.32.3 For 14 way, Double door SPN MCBDB Each 0.00 872.00 Rupees Eight Hundred Seventy Two Only 0.00

2.32.4 For 4 way, Double door TPN MCBDB Each 1.00 1064.00 Rupees One Thousand Sixty Four Only 1064.00

2.32.5 For 6 way, Double door TPN MCBDB Each 0.00 1111.00 Rupees One Thousand One Hundred Eleven Only 0.00

2.32.6 For 8 way, Doubte door TPN MCBDB Each 0.00 1342.00 Rupees One Thousand Three Hundred Forty Two Only 0.00

2.32.7 For Vertical, Double door TPN MCBDB Each 0.00 1161.00 Rupees One Thousand One Hundred Sixty One Only 0.00

2.33 Supplying and fixing , following ways, surface/recess mounting, Vertical type three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as lncomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCB) 0.00 0.00

2.33.1 4 way, Double door, l/C 1604, MCCB Each 0.00 72701.00 Rupees Seventy Two Thousand Seven Hundred One Only 0.00

2.33.2 6 way, Double door, l/C 1604, MCCB Each 0.00 13710.00 Rupees Thirteen Thousand Seven Hundred Ten Only 0.00

2.33.3 B way, Double door, l1C 1604, MCCB Each 0.00 15057.00 Rupees Fifteen Thousand Fifty Seven Only 0.00

2.33.4 12 way, Double door, l/C 1604, MCCB Each 0.00 24449.00 Rupees Twenty Four Thousand Four Hundred Forty Nine Only 0.00

2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCBilsolator) 0 0.00

2.8.L 2+2 way, Single door Each 0.00 1441.00 Rupees One Thousand Four Hundred Forty One Only 0.00

2.8.2 2+4 way, Single door Each 0.00 1399.00 Rupees One Thousand Three Hundred Ninety Nine Only 0.00

2.8.3 2+6 way, Single door Each 0.00 1713.00 Rupees One Thousand Seven Hundred Thirteen Only 0.00

2.8.4 2+10 way, Single door Each 0.00 1972.00 Rupees One Thousand Nine Hundred Seventy Two Only 0.00

2.8.s 5 way, Double door Each 0.00 2997.00 Rupees Two Thousand Nine Hundred Ninety Seven Only 0.00

2.8.6 8 way, Double door Each 5.00 2591.00 Rupees Two Thousand Five Hundred Ninety One Only 12955.00

2.8.7 12 way, Double door Each 0.00 2374.00 Rupees Two Thousand Three Hundred Seventy Four Only 0.00

2.8.8 14 way, Double door Each 0.00 3201.00 Rupees Three Thousand Two Hundred One Only 0.00

2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator) 0.00 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type Each 1.00 4184.00 Rupees Four Thousand One Hundred Eighty Four Only 4184.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type Each 0.00 5132.00 Rupees Five Thousand One Hundred Thirty Two Only 0.00

2.9.3 B way ( 4 + 24 ), Double door, horizontal type Each 0.00 6199.00 Rupees Six Thousand One Hundred Ninety Nine Only 0.00

2.1 Supplying and fixing following way, Vertical type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator) 0.00 0.00

2.10.1 4+ wby ( 4 + 12 ), Double door, Vertical type Each 0.00 4784.00 Rupees Four Thousand Seven Hundred Eighty Four Only 0.00

2.10.2 8 way ( 4 + 24 ), Double door, Vertical type Each 0.00 5132.00 Rupees Five Thousand One Hundred Thirty Two Only 0.00

2.10.3 12 way ( 4 + 36 ), Double door, Verticat type Each 0.00 6199.00 Rupees Six Thousand One Hundred Ninety Nine Only 0.00

2.12 Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required 0.00 0.00

2.12.L 6 A to 32'A, Single pole Each 11.00 237.00 Rupees Two Hundred Thirty Seven Only 2607.00

2.12.2 6 A to 32 A, SP&N Each 5.00 606.00 Rupees Six Hundred Six Only 3030.00

2.L2.3 6Ato32A,TP Each 0.00 1044.00 Rupees One Thousand Forty Four Only 0.00

2.12.4 6 A to 32 A, TP&N Each 1.00 1282.00 Rupees One Thousand Two Hundred Eighty Two Only 1282.00

2.L2.5 40 A to 63 A, Single pole Each 0.00 551.00 Rupees Five Hundred Fifty One Only 0.00

2.12.6 40 A to 63 A, SPN Each 0.00 1233.00 Rupees One Thousand Two Hundred Thirty Three Only 0.00

7.12.7 40 A to 63 A,.TP Each 0.00 1859.00 Rupees One Thousand Eight Hundred Fifty Nine Only 0.00

2.12.8 40 A to 63 A, TP&N Each 0.00 2379.00 Rupees Two Thousand Three Hundred Seventy Nine Only 0.00

1.7.2 Wiring for 6mts.Pole Two arms and singale arm light point wiring along with earth wire with 2x2.5 sq. mm +1x2.5 FR PVC insulated copper conductor single core cable in face / recessed medium PVC conduit. as required, all complete as per instructions of Elec.Er./ Architect. (104 pole x 10mts=1040 mts Each 173.00 246.00 Rupees Two Hundred Forty Six Only 42558.00

2.18 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00

2.18.1 25 Amps Each 2.00 2703.00 Rupees Two Thousand Seven Hundred Three Only 5406.00

2.18.2 40 Apms Each 2.00 3348.00 Rupees Three Thousand Three Hundred Forty Eight Only 6696.00

1.33 Supplying and fixing ceilling rose 2 pin 6amps on exisiting junction box/ wooden block including connection etc. as required. Each 10.00 64.00 Rupees Sixty Four Only 640.00

1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 11.00 80.00 Rupees Eighty Only 880.00

1.23.9 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Each 9.00 311.00 Rupees Three Hundred Eleven Only 2799.00

1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00 0.00

1.7.1 2x1.5 sq. Mm +1x1,5 sq. Mm earth wire Metre 135.00 201.00 Rupees Two Hundred One Only 27135.00

1.7.2 2x2.5 sq. Mm +1x2.5 sq. Mm earth wire Metre 340.00 246.00 Rupees Two Hundred Forty Six Only 83640.00

1.7.3 2x4sq. Mm +1x4 sq. Mm earth wire Metre 357.00 309.00 Rupees Three Hundred Nine Only 110313.00

1.7.4 2x6sq. Mm +1x6 sq. Mm earth wire Metre 117.00 422.00 Rupees Four Hundred Twenty Two Only 49374.00

1.7.8 4X4sq.mm+ 1X4sq.mm earth wire Metre 0.00 677.00 Rupees Six Hundred Seventy Seven Only 0.00

1.7.9 4X6sq.mm+ 1X4sq.mm earth wire Metre 0.00 924.00 Rupees Nine Hundred Twenty Four Only 0.00

1.7.10 4X10sq.mm+ 1X4sq.mm earth wire Metre 0.00 1166.00 Rupees One Thousand One Hundred Sixty Six Only 0.00

L.T LINE CANTROL PANEL-125A TPN 0.00 0.00

2.4.5 Providing and fixing 250A, rating and 36 ka.breaking capacity MCCB (TPN) in made of existing1.6mm thick sheet steel enclosure duly painted with powder coating, wall straps cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required Each 0.00 18646.00 Rupees Eighteen Thousand Six Hundred Forty Six Only 0.00

2.12.2 Supptying and fixing 32A rating, 220 volts, SPN "C"curve, miniature circuit breaker suitable for inductive loads of two poles in the existing panel complete with connections, testing and commissioning etc. as required' Each 7.00 606.00 Rupees Six Hundred Six Only 4242.00

2.12.4 Supptying and fixing 32A rating, 415 volts, TPN "C"curve, miniature circuit breaker suitable for inductive loads of two poles in the existing panel complete with connections, testing and commissioning etc. as required' Each 1.00 1282.00 Rupees One Thousand Two Hundred Eighty Two Only 1282.00

8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc asrequired. Each 0.00 6536.00 Rupees Six Thousand Five Hundred Thirty Six Only 0.00

2319 Providing and fixing slector switch for analog ammmeter as per require load in amps on front side in excluding cubical panel as required. Each 0.00 298.00 Rupees Two Hundred Ninety Eight Only 0.00

2313 Providing and fixing Pilot lamp for indicator on front side in excluding cubical panel as required. Each 1.00 148.00 Rupees One Hundred Forty Eight Only 148.00

2.2 Providing and fixing M.V danger notice plate of 200mmx150mm made of mild steel at least 2mm thick, vitreius enameled white on both side and with inscription in singale red colour on front side in excluding cubical panel as required. Each 0.00 214.00 Rupees Two Hundred Fourteen Only 0.00

8.12 Supply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.) SQ. FT 4.00 2261.00 Rupees Two Thousand Two Hundred Sixty One Only 9044.00

SUPPLY & MAKING OF EARTHPITS 0.00 0.00

3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for eafth electrode to fill up the excavated earth and earth inspection pit etc. as required. Each 1.00 16675.00 Rupees Sixteen Thousand Six Hundred Seventy Five Only 16675.00

3.17 Supplying and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40.00 144.00 Rupees One Hundred Forty Four Only 5760.00

SUPPLY OF FIXTURES & FANS 0.00 0.00

2. 5.4 Supplying and fixing replaceable compact commercial batten suitable for Singal TB LED tube complete with 20 watt LED polycarbonate TB tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. asrequired. Each 0.00 834.00 Rupees Eight Hundred Thirty Four Only 0.00

5.8 Supplying and fixing reces mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00 0.00

5.8.3 18 watt Each 54.00 1694.00 Rupees One Thousand Six Hundred Ninety Four Only 91476.00

8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street Iight pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm, small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) 0.00 0.00

8.22.1 Single arm, 1000 mm Each 1 24982.00 Rupees Twenty Four Thousand Nine Hundred Eighty Two Only 24982.00

8.22.2 Double arm, 1000 mm Each 17.00 26191.00 Rupees Twenty Six Thousand One Hundred Ninety One Only 445247.00

6.3.5 Supplying and fixing of For 120 watt LED street light types LED Electronic driver in the existing LED street Iight etc as required. Each 34 3101.00 Rupees Three Thousand One Hundred One Only 105434.00

8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 9.00 2482.00 Rupees Two Thousand Four Hundred Eighty Two Only 22338.00

8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00 0.00

8.17.1 300 mm sweep Each 1.00 2572.00 Rupees Two Thousand Five Hundred Seventy Two Only 2572.00

8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required Each 11.00 3670.00 Rupees Three Thousand Six Hundred Seventy Only 40370.00

SUPPLY &LAYING MAIN & SUBMAIN OF CABLE ) 0.00 0.00

7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00 0.00

7.7.11 95 sq. mm, 3.5 core Metre 17.00 950.00 Rupees Nine Hundred Fifty Only 16150.00

7.7.1 6 sq. mm, 2 core Metre 36.00 159.00 Rupees One Hundred Fifty Nine Only 5724.00

7.7.4 10 sq. mm, 2 core Metre 14.00 249.00 Rupees Two Hundred Forty Nine Only 3486.00

7.1 Laying of one number PVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00 0.00

7.1.1 Upto 35 sq. mm Metre 0.00 315.00 Rupees Three Hundred Fifteen Only 0.00

7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 15.00 326.00 Rupees Three Hundred Twenty Six Only 4890.00

7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 0.00 336.00 Rupees Three Hundred Thirty Six Only 0.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm Metre 0.00 368.00 Rupees Three Hundred Sixty Eight Only 0.00

BOQ NSR For Development Of Lord Shiva Statue Park At Tarapur, Near Teldiha Temple.

S.No Sor Code Description of Items Unit Total Quantity Amount to be Quoted by Bidder

CIVIL NSR ITEMS (A')

1 NSR-1 Providing and fixing A1 Fencing 358 anti climb nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Sqm 2693.00

2 NSR-2 Providing and laying Cobble stone 50 mm thick of 125 mm x 125 mm size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge Sqm 5812.00

3 NSR-4 Providing and fixing lockable openable system Aluminum works for openable doors applications of Tostem or Equivalent make . The extruded aluminium sections should be made from T6 & Powder Coating with Texguard coating , silicon coated to suit marine atmosphere . All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame . The outer frame Depth will be 45 mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment.. The system should allow the application of glazing or panels with thickness up to 8mm. System should have a 25-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts only applies to normal and realistically foreseeable use. Sqm 24.00

4 NSR-5 Providing and fixing lockable openable system Aluminum works for openable doors applications of Tostem or Equivalent make . The extruded aluminium sections should be made from T6 & Powder Coating with Texguard coating , silicon coated to suit marine atmosphere . All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame . The outer frame Depth will be 45 mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment.. The system should allow the application of glazing or panels with thickness up to 8mm. System should have a 25-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts only applies to normal and realistically foreseeable use. Sqm 4.00

Total Amount Civil NSR Item (A')

PHE NSR ITEMS (B')

5 MR Providing & fixing wall wall hung w.c with UF soft close set over hinges assecerries set size 360x500x380 mm,Jaquar ,cat.no -LYS - WHT -38953BIUFSM. or equivalent & Concealed Single piece slim concealed cistern cat.no -JCS - WHT -2400WS.with Flusing Control plate cat.no -JCP -CHR -372415.all complete. specification and direction of Engineer-in-charge. Each

6 MR Providing and fixing counter basin size- (mm) 190x550x430 (Jaquar,CAT NO- FLS-wht-5701) including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each 12.00

7 MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

110 mm dia metre 132.00

40 mm dia metre 44.00

8 MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 8.00

110 mm plain bend Each 24.00

110 mm door bend Each 16.00

110 mm dia X 45 Bend Each 4.00

110 X 110 mm dia plain - y Each 4.00

110 mm pipe clip Each 32.00

110 X110 mm dia p-trap Each 12.00

40 mm elbow Each 48.00

40 mm plain tee Each 12.00

9 MR Providing Paper holder (jaguar AKP-35753PS) or Equivalent Each

10 MR Providing Towel Ring (Jaquar product No. AKP-35751P ) or equivalent Each

11 MR Soap dispenser (jaguar AKP-35735P) or equivalent Each

12 MR CP brass 2-way bib cock with wall flange(Kubix-F) 15mm(jaguar -KUP-35041PM) or equivalent Each

13 MR 110 mm dia cp jali Each

D TUBE WELL X 1 NOS.

MR Establishment of -2HP of submersible pump set of approved brand and make, all complete Each 2.00

MR Provding and fixing white vitreous urinal (Jaquar URS-WHT-132530) or equivalent with Aquisense Sensor concealed type flushing valve for Urinal complete set with installation box with control cock ,(jaquar CAT NO- SNR-STL-51087) etc. all complete. Each

MR Providing and fixing Curved shaped urinal partition with frosted glass finish: Chrome, size-900 H X 450 W (jaguar-JSE-CHR-110UC450X) or equivalent Glass: 10mm as per direction of Engineer-in-charge and finished smooth. Each

MR Providing and fixing Table top wash basin size- (mm) 500x425x130 (Jaquar,CAT NO- FLS-WHT-5935) or equivalent including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each

MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

40 mm dia metre

MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 X 110 mm dia door tee Each

110 mm dia X 45 Bend Each

110 mm pipe clip Each

160 mm dia ( B- TYPE) metre

160 mm plain bend Each

160 mm door bend Each

160 X 110 mm Reducing-y Each

160 mm pipe clip Each

C.P. BRASS FITTINGS

MR CP brass 2-way bib cock with wall flange(Kubix-F) 15mm(jaguar -KUP-35041PM) or equivalent Each

MR 110 mm dia cp jali Each

MR Providing & Fixing angle stop cock ,15 mm dia nominal bore (Jaquar -KUP-35053PM) or equivalent Each

MR Providing & Fixing Soap Dish Holder (Jaquar product No. AKP-CHR-35731P) Each

MR Providing and Fixing Wall Mixer 3-in-1 System (Jaquar product No KUP-35125PM) Each

MR Providing and Fixing Overhead Shower with Arm (Jaquar product No OHS-35495 ) Each

MR Providing and Fixing Hand Shower with Shower Tube (jaquar Product No HSH-1717 ) Each

MR Providing Towel Rail (Jaquar product No. AKP-CHR-35701PS ) Each

Total PHE NSR (B')

ELECTRIC NSR ITEMS (C')

14 NSR-E1 Providing and fixing 3000 mm decorative pole light, made in mild aluminium diecast, laser cut, 60Watt Led and finished to colour of choice and Twinke Brand Lazer Model as per direction of engineer incharge or Architect Each 76.00

15 NSR-E2 Providing and fixing 1200 mm decorative pole light, made in mild aluminium diecast, laser cut, 20 Watt Led and finished to colour of choice and Twinke Brand Lazer Model as per direction of engineer incharge or Architect Each 30.00

16 NSR-E3 Providing and fixing 6wx2 Up down wall washer IP 66 Grade Ankur Brand as per direction of engineer incharge or Architect Each 24.00

17 NSR-E4 Providing and fixing 6watt Spike light IP68 Grade Ankur as per direction of engineer incharge or Architect Each 24.00

18 NSR-E5 Providing and fixing Ground Burial Light recessed Ankur as per direction of engineer incharge or Architect Each 76.00

19 NSR-E6 Providing and fixing Ground Burial linear Light recessed as per direction of engineer incharge or Architect Each 2.00

20 NSR-E7 Providing and fixing 6watt Base Mount light IP68 Grade as per direction of engineer incharge or Architect Each 18.00

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LTD.

(A GOVERNMENT OF BIHAR UNDERTAKING)

DEVELOPMENT OF LORD SHIVA TEMPLE PREMISES AT TARAPUR NEAR TELDIHA TEMPLE UNDER MUNGER DISTRICT

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Mobile Number

NIT - 56/E-TENDER/ BSTDC/SBD/2025-26

Sl No. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 75,805,132.00

2 Total Non-Schedule Amount (Rs.) To be Quoted !

TOTAL AMOUNT Rs. 101,292,530.00

BOQ SOR For Development Of Lord Shiva Statue Park At Tarapur, Near Teldiha Temple.

S.No Sor Code Description of Items Unit Total Quantity Rate Total Amount

In Digit In Words

CIVIL SOR ITEMS (A)

1 2.6 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed.

2.6.1 All Kinds of soil Cum 1855.54 314.90 Rupees Three Hundred Fourteen and Ninety Paise Only 584308.99

2 2.25(A) Excavating, supplying and filling of local earth (including royalty butexcluding cairriage cost) by mechanical transport upto a lead of 3kmalso including ramming and watering of the earth in layers notexceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. Cum 61.10 411.70 Rupees Four Hundred Eleven and Seventy Paise Only 25155.28

3 2.25 Pumping out water caused by springs, tidal or river seepage, brokenwater mains or drains and the like. KI 107.20 Rupees One Hundred Seven and Twenty Paise Only

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm in depth:consolidating each deposited layer by ramming and watering lead Cum 28241.36 123.90 Rupees One Hundred Twenty Three and Ninety Paise Only 3499104.53

5 2.28 Supplying and Filling in plinth with local sand and under floors including,watering, ramming consolidating and dressing complete. Cum 131.13 287.30 Rupees Two Hundred Eighty Seven and Thirty Paise Only 37672.36

2.37 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONALanti-termites' treatrnent(including the cost of chemical emulsion)

2.37.1 Along external wall where the apron is not provided usingchemical imulsion @ 7.5 liters / sqm of the vertical surfaceof the substructure to a depth of 300 mm includingexcavation channel along the wall & rodding etc. complete:

6 2.37.1.1 With chlorpyriphos/Lindone E.C. 20% with 1% concentration Meter 1146.80 39.90 Rupees Thirty Nine and Ninety Paise Only 45757.32

2.37.2 Along the external wall below concrete or masonry apronusing chemical emulsion @ 2.55 litres per linear metreincluding drilling and plugging holes etc.

7 2.37.2.1 With chlorpyriphos E.C. 20% with 1% concentration Meter 1146.80 49.10 Rupees Forty Nine and Ten Paise Only 56307.88

2.37.3 Treatment of soil under existing floors using chemicalemulsion @ one litre per hole, 300 mm apart includingdrilling and plugging 12 mm diameter holes with cementmortar 1:2 (1 cement: 2 coarse sand) to match the existingfloor.

8 2.37.3.1 With Chlorpyriphos EC 20% with 1% concentration Sqm 67.89 241.20 Rupees Two Hundred Forty One and Twenty Paise Only 16375.07

20.20 Boring, providing and installing bored cast-in-situ reinforcedcement concrete piles of grade M-25 of specified diameter andlength below the pile cap, to carry a safe working load not lessthan specified, excluding the cost of steel reinforcement butincluding the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap).

9 20.2.2 400 mm dia piles Meter 1163.30 Rupees One Thousand One Hundred Sixty Three and Thirty Paise Only

4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.5 1.3.6 (1 Cement :4 coarse sand :8 graded stone agregate 40 mmnominal size) Cum 1420.39 3434.00 Rupees Three Thousand Four Hundred Thirty Four Only 4877602.16

10 4.1.8 1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mmnominal size) Cum 20.56 2975.20 Rupees Two Thousand Nine Hundred Seventy Five and Twenty Paise Only 61180.08

11 4.1.2 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cum 4420.80 Rupees Four Thousand Four Hundred Twenty and Eighty Paise Only

5.1 Providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centring,shuttering,finishing andreinforcement-All work puto plinth level

12 5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Cum 7.74 4688.30 Rupees Four Thousand Six Hundred Eighty Eight and Thirty Paise Only 36287.44

5.33 B Add or deduct for providing richer or leaner mixes respectively at all floorlevels.

13 5.33 B.1 Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cum 164.50 Rupees One Hundred Sixty Four and Fifty Paise Only

5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.

5.33.1. All works up to plinth level

14 5.33.1.1 Concrete of M-25 grade with minimum cement content of 350kg/cum Cum 729.25 5063.40 Rupees Five Thousand Sixty Three and Forty Paise Only 3692504.50

5.33.1.2 Concrete of M-30 grade with minimum cement content of 350kg/cum Cum 5189.10 Rupees Five Thousand One Hundred Eighty Nine and Ten Paise Only

5.33.2 All work above Plinth level upto floor V Level.

15 5.33.2.1 Concrete of M-25 grade with minimum cement content of 350kg/cum Cum 251.26 5863.20 Rupees Five Thousand Eight Hundred Sixty Three and Twenty Paise Only 1473179.89

5.33.2.2 Concrete of M-30 grade with minimum cement content of 350kg/cum Cum 5989.00 Rupees Five Thousand Nine Hundred Eighty Nine Only

16 5.50 Reinforced cement concrete work in arhes, archribs, domes, vaults, shells, folded plate and roofs having slope more than 150 upto floor fivelevel excluding the cost of centring. Shuttering. Finishing and reinforement with 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size) Cum 5677.10 Rupees Five Thousand Six Hundred Seventy Seven and Ten Paise Only

5.9 Centring and shuttering including strutting,propping etc. and removal ofform for.

17 5.9.1 Foundations, footings, bases of columns etc. for massconcrete. Sqm 1366.77 211.60 Rupees Two Hundred Eleven and Sixty Paise Only 289208.53

18 5.9.2 Walls (any thickness) including attached pilasters.Butteresses, plinth and string courses etc. Sqm 375.10 Rupees Three Hundred Seventy Five and Ten Paise Only

19 5.9.3 Suspended floors, roots, landings, balcnies and accessplatform. Sqm 142.19 437.50 Rupees Four Hundred Thirty Seven and Fifty Paise Only 62207.03

20 5.9.5 Lintels, beams, plinth bams, griders, bressumers andcontilevers. Sqm 1667.68 404.70 Rupees Four Hundred Four and Seventy Paise Only 674910.10

21 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts Sqm 1645.06 494.40 Rupees Four Hundred Ninety Four and Forty Paise Only 813315.69

22 5.9.7 Stairs,(excluding landings) except spiral-staircaces. Sqm 439.90 Rupees Four Hundred Thirty Nine and Ninety Paise Only

23 5.9.9 Arches,domes,vaults upto 6m span Sqm 1128.60 Rupees One Thousand One Hundred Twenty Eight and Sixty Paise Only

24 5.9.19 Weather shade,Chajjas, corbels etc. including edges Sqm 114.72 550.90 Rupees Five Hundred Fifty and Ninety Paise Only 63199.25

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete.

25 5.22.7.A Thermo-Mechanically Treated bars TMTC-500-8mm dia. Kg 19862.07 94.50 Rupees Ninety Four and Fifty Paise Only 1876965.65

26 5.22.7.B Thermo-Mechanically Treated bars TMTC-500-10mm dia. Kg 25893.04 92.60 Rupees Ninety Two and Sixty Paise Only 2397695.73

27 5.22.7.C Thermo-Mechanically Treated bars TMTC-500-12mm dia. Kg 18965.74 90.80 Rupees Ninety and Eighty Paise Only 1722088.97

28 5.22.7.D Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. Kg 25131.71 91.70 Rupees Ninety One and Seventy Paise Only 2304577.77

29 5.22.7.E Thermo-Mechanically Treated bars TMT Fe-500-20mrn dia. Kg 6008.60 91.70 Rupees Ninety One and Seventy Paise Only 550988.58

30 5.22.7.f Thermo-Mechanically Treated bars TMT Fe-500-25mrn dia. Kg 6008.60 91.70 Rupees Ninety One and Seventy Paise Only 550988.58

6.1A Brick work with bricks of class designation 100A in foundations and plinth in

31 6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) Cum 453.14 4819.90 Rupees Four Thousand Eight Hundred Nineteen and Ninety Paise Only 2184087.08

32 6.3A Extra tor Brick work in superstructure above plinth level upto floor V cum Cum 294.11 842.20 Rupees Eight Hundred Forty Two and Twenty Paise Only 247696.49

33 6.15 A Brick work in plain arches in superstructure including centring andshuttering complete for span upto 6 metres with bricks of classdesignation 100A in cement mortar 1:3(1 cement:3 coarse sand ) Cum 8355.10 Rupees Eight Thousand Three Hundred Fifty Five and Ten Paise Only

34 6.41A Brick work with selected bricks of class designation 100A in exposedbrick work including making horizontal and vertical irooves 10mm wide12mm deep complete from ground level up to plinth level in cementmortars 1:6(1 cement: 6 corse sand) Cum 39.79 4925.20 Rupees Four Thousand Nine Hundred Twenty Five and Twenty Paise Only 195961.40

35 6.41A Extra for exprosed brick work in superstructure above plinth level andupto floor level. 0.75 x 1.5 = 1.13 Cum 39.79 1068.00 Rupees One Thousand Sixty Eight Only 42493.05

7.40.1 Providing and fixing dry cladding upto 10 metre heights with 30 mm thickgang saw cut stone with (machine cut edges) of uniform colour and sizeupto 1mx1m, fixed to structural steel frame work and / or with the help ofcramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid forseparately.) Red sand stone Sqm 2951.00 Rupees Two Thousand Nine Hundred Fifty One Only

7.41 Providing and fixing structural steel frame (for dry cladding with 30 mmthick gang saw cut with machine cut edges sand stone) on walls at allheights using M.S. square / rectangular tube in the required pattern as perarchitectural drawing, including cost of cutting, bending, welding etc. Theframe work shall be fixed to the wall with the help of MS brackets / lugs ofangle iron / flats etc. which shall be welded to the frame and embedded inbrick wall with cement concrete block 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) of size 300x230x300 mm,including cost of necessary centring and shuttering and with approvedexpansion hold fasteners on CC/RCC surface, including drilling necessaryholes. Approved cramps / pins etc. shall be welded to the frame work tosupport stone cladding, the steel work will be given a priming coat of Zincprimer as approved by Engineer-in-Charge and painted with two or morecoats of epoxy paint (Shop drawings shall be submitted by the contractor tothe Engineer-in-Charge for approval before execution). The frame workshall be fixed in true horizontal & vertical lines/planes. (Only structural steelframe work shall be measured for the purpose of payment, stainless steelcramps shall be paid for separately and nothing extra shall be paid.) Per Kg 160.70 Rupees One Hundred Sixty and Seventy Paise Only

7.42 Providing and fixing adjustable stainless steel cramps of approved quality,required shape and size,adjustable with stainless steel nuts, bolts andwasher (total weight not less than 260 gms), for dry stone cladding fixed onframe work at suitable location, including making necessary recesses instone slab, drilling required holes etc complete as per direction of theEngineer-in-charge Nos 265.00 Rupees Two Hundred Sixty Five Only

36 8.2.2 Providingand fixing18mmthickgangsawcut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of requiredsize,approvedshade, colourandtexture laidover20mm thick base cementmortar 1:4 (1 cement : 4coarse sand), joints treatedwithwhite cement, mixedwithmatching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm Sqm 5.42 4401.20 Rupees Four Thousand Four Hundred One and Twenty Paise Only 23872.11

8.3.2 Providingedgemoulding to18mmthickmarblestonecounters, vanitiesetc., includingmachinepolishingtoedgetogivehighgloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Meter 260.10 Rupees Two Hundred Sixty and Ten Paise Only

8.11.1 Providing and fixing machine cut, mirror / eggshell polished , Marblestone work for wall lining (veneer work) including dado, skirting,risers of steps etc., in required design and pattern whereverrequired,stones of different finished surface texture, on 12 mm(average) thick cement mortar 1:3 (1 cement :3 coarse sand) laidand jointed with white cement slurry @ 3.3 kg/sqm including pointingwith white cement slurry admixed with pigment of matching shade,including rubbing, curing, polishing etc. all complete as perArchitectural drawings, and as directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. Sqm 7305.90 Rupees Seven Thousand Three Hundred Five and Ninety Paise Only

9.10 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs orwith dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

37 9.1.1 Second class teak wood Cum 120526.60 Rupees One Lakh Twenty Thousand Five Hundred Twenty Six and Sixty Paise Only

38 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 639.40 Rupees Six Hundred Thirty Nine and Forty Paise Only

9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

39 9.20.1 35 mm thick including stainless steel butt hinges withnecessary screwssqm Sqm 2845.60 Rupees Two Thousand Eight Hundred Forty Five and Sixty Paise Only

9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

40 9.48.1 Fixed to steel windows by welding Kg 144.50 Rupees One Hundred Forty Four and Fifty Paise Only

9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc Kg 161.10 Rupees One Hundred Sixty One and Ten Paise Only

9.73 Providing and fixing bright finished brass parliamentary hinges withnecessary screws etc. complete:

41 9.73.1 250x10mm Each 381.60 Rupees Three Hundred Eighty One and Sixty Paise Only

9.74 Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete:

42 9.74.1 250x10mm Each 369.40 Rupees Three Hundred Sixty Nine and Forty Paise Only

43 9.81.1 Providing and fixing bright finished brass handles with screws etc.complete: 125 mm Each 202.10 Rupees Two Hundred Two and Ten Paise Only

44 9.82 Providing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. Each 108.10 Rupees One Hundred Eight and Ten Paise Only

45 9.83 Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Each 979.50 Rupees Nine Hundred Seventy Nine and Fifty Paise Only

10.6 Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside lockingwith push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. topcover of required thickness for rolling shutters.

45 10.6.1 80x1.25mmM.S. Laths with 1.25mm thick top cover. Sqm 2673.70 Rupees Two Thousand Six Hundred Seventy Three and Seventy Paise Only

46 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes,channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing withnecessary accessories & stainless steel dash fasteners , stainless steelbolts etc., of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, ( forpayment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts,fasteners etc.). Kg 1277.07 546.80 Rupees Five Hundred Forty Six and Eighty Paise Only 698301.88

47 10.43 Providing and fixing concertina coil fencing with punched tape concertinan coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T.reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbedtape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Meter 272.60 Rupees Two Hundred Seventy Two and Sixty Paise Only

11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand)

48 11.26.1 20 to 25 mm thick - Sqm 68.71 1252.70 Rupees One Thousand Two Hundred Fifty Two and Seventy Paise Only 86066.75

11.41A.2 Glazed vitrified floor tiles polished finish of size

11.41A.2.3 Size of Tile 800 x 800 mm Sqm 1287.40 Rupees One Thousand Two Hundred Eighty Seven and Forty Paise Only

11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement& matching pigments etc. complete.

49 11.46.2 Size of Tile 600 x 600 mm. Sqm 1191.80 Rupees One Thousand One Hundred Ninety One and Eighty Paise Only

11.46.3 Size of Tile 800 x 800 mm. Sqm 1658.00 Rupees One Thousand Six Hundred Fifty Eight Only

50 11.52 Providing and laying machine cut, mirror polished Marble stoneflooring, in required design (Simple geometrical, abstract etc.) and inpatterns in combination with Italian marble stones of different colours,shades and finished surface texture etc., in linear portions of thebuilding, all complete as per the shades and finished surface textureetc., in linear portions of the building, all complete as per thearchitectural drawings, with 18 mm thick stone slab laid over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)laid and jointed with white cement slurry @ 4.4 kg/sqm includingpointing with white cement slurry admixed with pigment to match themarble shade including rubbing , curing and polishing etc. all completeas specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, FireRed or Dark Emperadore etc. Sqm 5908.40 Rupees Five Thousand Nine Hundred Eight and Forty Paise Only

51 8.14.2.4 Stone work (machine cut edges) for wall lining etc. (veneer work)upto 10 metre height, backing filled with a grout of average 12 mmthick cement mortar 1:3 (1 cement : 3 coarse sand) includingpointing in white cement mortar 1:2 (1 white cement : 2 stone dust)with an admixture of pigment matching the stone shade : (To besecured to the backing and the sides by means of cramps and pinswhich shall be paid for separately) : Red sand stone - Exposed face machine cut and tablerubbed with rough backing 40 mm thick Sqm 3488.20 Rupees Three Thousand Four Hundred Eighty Eight and Twenty Paise Only

52 11.30.1 40 mm thick fine dressed stone flooring over 20 mm (average) thickbase with joint finished fiush:base 1:5 (1 cement: 5 coarse sand )withjoints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2stone dust) admixed with pigment to match the shade of stone andpointing with same mortar. Red Sand Stone Sqm 13728.62 849.20 Rupees Eight Hundred Forty Nine and Twenty Paise Only 11658344.27

53 10.32.2 Steel work welded in built up sections/framed worK including cuttinghoisting, rixing in position and applying a priming coat of approved steelprimer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. gates &similar works. Kg 855.00 114.60 Rupees One Hundred Fourteen and Sixty Paise Only 97983.00

54 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillarslaid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarsesand ) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slab including rubbing and polishing complete. Detailsof cost for 10 sqm Sqm 5.94 1334.90 Rupees One Thousand Three Hundred Thirty Four and Ninety Paise Only 7929.31

55 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (Thickness to be specified by the manufacture) of approvedmake in all colours, shades except burgundy , bottle green , black ofany size as approved by Engineer-in-charge in skirting , risers of stepsand dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqmincluding pointing in white cement mixed with pigment of matchingshade complete. Sqm 795.00 Rupees Seven Hundred Ninety Five Only

56 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of E/l, Sqm 14250.02 283.30 Rupees Two Hundred Eighty Three and Thirty Paise Only 4037031.01

57 11.79.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’sspecifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern. Sqm

58 11.55.1 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sqm 2147.70 Rupees Two Thousand One Hundred Forty Seven and Seventy Paise Only

59 12.33A Providing and laying pressed clay tiles (as per approved pattern20 mm nominal thickness and of approved size) on roofs jointedwith cement mortar 1:4(1 cement :4 coarse sand )mixed with 2%integral water proofing compound laid over a bed of 20 mm thickcement mortar 1:4(1 cement::4 coarse sand )and finished neatcomplete Sqm 57.36 490.30 Rupees Four Hundred Ninety and Thirty Paise Only 28123.61

13.11 Cement plaster in course sand

12 mm cement plaster of mix:

60 13.11.2 1:4(1 cement :4 coarse sand)Interior Plaster Sqm 229.82 152.90 Rupees One Hundred Fifty Two and Ninety Paise Only 35138.71

61 13.20 18 mm cement plaster in two coats under layer 12 mm thick cementplaster 1:5 (1 cement :5 coarse sand) and top layer 6 mm thick,cement plaster 1:3 (1 cement: 3 coarse sand) finished rough withsponge. Sqm 1650.90 227.40 Rupees Two Hundred Twenty Seven and Forty Paise Only 375414.66

13.24 6 mm cement plaster to ceiling of mix : 67.89 0.00

62 13.24.2 1:4(1 cement: 4 coarse sand) Sqm 67.89 125.60 Rupees One Hundred Twenty Five and Sixty Paise Only 8526.98

63 13.39.1 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In one coat Sqm 287.40 Rupees Two Hundred Eighty Seven and Forty Paise Only

64 13.80 A.2 Providing and applying white cement based putty of averagethickness 2 mm, of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smoothcomplete. Sqm 147.30 105.40 Rupees One Hundred Five and Forty Paise Only 15525.42

65 13.92.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Sqm 204.66 86.40 Rupees Eighty Six and Forty Paise Only 17682.62

13.48 Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of requiredshade (Company Depot Tinted) with silicon additives.

66 13.48A.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sqm 112.00 Rupees One Hundred Twelve Only

13.45.1 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm Sqm 215.20 Rupees Two Hundred Fifteen and Twenty Paise Only

67 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade concrete in position etc all complete job. Cum 12.98 7998.80 Rupees Seven Thousand Nine Hundred Ninety Eight and Eighty Paise Only 103815.63

68 16.87.2 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineerin-Charge. With granite stone of all colour except black, cherry/ruby red of area more than 0.50 sqm. Sqm 3686.50 Rupees Three Thousand Six Hundred Eighty Six and Fifty Paise Only

69 16.94 Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge Cum 3007.70 Rupees Three Thousand Seven and Seventy Paise Only

16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

70 16.78.1 With material conforming to Grade-I (size range 75mm to 0.075 mm) having CBR Value-30 Cum 476.59 1310.40 Rupees One Thousand Three Hundred Ten and Forty Paise Only 624527.99

71 16.78.2 With material conforming to Grade-II (size range 53mm to 0.075 mm ) having CBR Value-25 Cum 238.30 1239.40 Rupees One Thousand Two Hundred Thirty Nine and Forty Paise Only 295344.93

20.60 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loadingplatform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.

72 20.6.1.1 Initial test Per Test 51510.60 Rupees Fifty One Thousand Five Hundred Ten and Sixty Paise Only

73 20.6.1.2 Routine test Per Test 18463.50 Rupees Eighteen Thousand Four Hundred Sixty Three and Fifty Paise Only

74 22.8.1 Providing and laying integral cement based water proofing treatmentincluding prepatation of surface as required for treatment of roofs,balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary theadjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge With average thickness of 120 mm and minimum thickness atkhurras point to be 65 .. Sqm 850.70 Rupees Eight Hundred Fifty and Seventy Paise Only

17.28.1 Semi rigid pipe

75 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment).. Cum 26437.66 143.50 Rupees One Hundred Forty Three and Fifty Paise Only 3793804.50

A Stone Chips Cum 1945.55 2731.18 Rupees Two Thousand Seven Hundred Thirty One and Eighteen Paise Only 5313639.07

B Coarse Sand Cum 1024.78 1765.61 Rupees One Thousand Seven Hundred Sixty Five and Sixty Paise Only 1809358.09

D Local Sand Cum 131.13 322.81 Rupees Three Hundred Twenty Two and Eighty One Paise Only 42328.99

D' Earth Cum 26437.66 322.81 Rupees Three Hundred Twenty Two and Eighty One Paise Only 8534415.86

E Bricks 1000 Nos 811.68 952.00 Rupees Nine Hundred Fifty One and Ninety Nine Paise Only 772711.02

77 Difference of cost

F Cement Tonn 955.91 111.27 Rupees One Hundred Eleven and Twenty Seven Paise Only 106368.07

G Bricks 1000 Nos 811.68 365.61 Rupees Three Hundred Sixty Five and Sixty One Paise Only 296760.36

Total Amount SOR (A) After Applying GST Impact factor 1.0536 70764869.36

PHE SOR ITEMS (B)

A SANITARY INSTALLATION

17.10 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

78 17.1.1 White Vitreous china Orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests. Each 4.00 4470.90 Rupees Four Thousand Four Hundred Seventy and Ninety Paise Only 17883.60

17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

79 17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 4.00 5504.30 Rupees Five Thousand Five Hundred Four and Thirty Paise Only 22017.20

80 17.40 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions G.I. clamps, complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern Each 2.00 5733.30 Rupees Five Thousand Seven Hundred Thirty Three and Thirty Paise Only 11466.60

81 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:

83 17.10.1. Kitchen sink with drain board

84 17.10.1.4 510x1040mm bowl depth 178mm Each 5231.50 Rupees Five Thousand Two Hundred Thirty One and Fifty Paise Only

8.10 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.

82 8.10.1 White Agaria Marble Stone Sqm 1.50 3061.20 Rupees Three Thousand Sixty One and Twenty Paise Only 4591.80

85 17.28 Provding and fixing PVC waste pipe for sink & wash basin including PVC waste fittings complete

17.28.2 Semi rigid pipe

86 17.28.2.2 40 mm dia Each 4.00 104.40 Rupees One Hundred Four and Forty Paise Only 417.60

87 17.34 Provding and fixing Toilet Paper.holder

17.34.2 Vitreous china Each 4.00 332.90 Rupees Three Hundred Thirty Two and Ninety Paise Only 1331.60

88 17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. Each 12.00 146.30 Rupees One Hundred Forty Six and Thirty Paise Only 1755.60

89 17.72 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 4.00 204.70 Rupees Two Hundred Four and Seventy Paise Only 818.80

90 17.31 Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete. Each 12.00 1068.50 Rupees One Thousand Sixty Eight and Fifty Paise Only 12822.00

91 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20 mm Nominal outer dia pipes Metre 20.00 233.90 Rupees Two Hundred Thirty Three and Ninety Paise Only 4678.00

18.7.3 25 mm Nominal outer dia pipes Metre 52.00 317.30 Rupees Three Hundred Seventeen and Thirty Paise Only 16499.60

18.7.4 32 mm Nominal outer dia pipes Metre 36.00 395.20 Rupees Three Hundred Ninety Five and Twenty Paise Only 14227.20

18.7.5 40 mm Nominal outer dia pipes Metre 76.00 538.40 Rupees Five Hundred Thirty Eight and Forty Paise Only 40918.40

18.7.6 50 mm Nominal outer dia pipes Metre 791.00 Rupees Seven Hundred Ninety One Only

92 18.80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

18.8.1 15 mm Nominal outer dia pipes Metre 16.00 278.20 Rupees Two Hundred Seventy Eight and Twenty Paise Only 4451.20

18.8.2 20 mm Nominal outer dia pipes Metre 68.00 350.80 Rupees Three Hundred Fifty and Eighty Paise Only 23854.40

18.8.3 25 mm Nominal outer dia pipes Metre 30.00 463.10 Rupees Four Hundred Sixty Three and Ten Paise Only 13893.00

18.8.4 32 mm Nominal outer dia pipes Metre 549.80 Rupees Five Hundred Forty Nine and Eighty Paise Only

93 18.90 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.3 25 mm nominal outer dia pipes Metre 294.70 Rupees Two Hundred Ninety Four and Seventy Paise Only

18.9.4 32 mm nominal outer dia pipes Metre 24.00 359.10 Rupees Three Hundred Fifty Nine and Ten Paise Only 8618.40

18.9.5 40 mm nominal outer dia pipes Metre 12.00 477.60 Rupees Four Hundred Seventy Seven and Sixty Paise Only 5731.20

18.9.6 50 mm nominal outer dia pipes Metre 730.30 Rupees Seven Hundred Thirty and Thirty Paise Only

94 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions.

18.21.2 45 cm length

18.21.2.1 15 mm Nominal bore Each. 22.00 85.20 Rupees Eighty Five and Twenty Paise Only 1874.40

95 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality.

18.17.1A 20 mm Nominal bore Each. 2.00 465.40 Rupees Four Hundred Sixty Five and Forty Paise Only 930.80

18.17.1 25 mm Nominal bore Each. 8.00 532.30 Rupees Five Hundred Thirty Two and Thirty Paise Only 4258.40

18.17.2 32 mm Nominal bore Each. 2.00 589.90 Rupees Five Hundred Eighty Nine and Ninety Paise Only 1179.80

18.17.3 40 mm Nominal bore Each. 6.00 707.30 Rupees Seven Hundred Seven and Thirty Paise Only 4243.80

18.17.4 50 mm Nominal bore Each. 878.20 Rupees Eight Hundred Seventy Eight and Twenty Paise Only

96 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end).

18.19.2 32mm nominal bore

18.19.2.2 Vertical Each. 777.90 Rupees Seven Hundred Seventy Seven and Ninety Paise Only

18.19.3 40 mm Nominoal Bore

18.19.3.2 Vertical Each 2.00 1049.20 Rupees One Thousand Forty Nine and Twenty Paise Only 2098.40

C.P. BRASS FITTINGS

97 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931.

18.49.1 15 mm Nominal bore Each 8.00 434.20 Rupees Four Hundred Thirty Four and Twenty Paise Only 3473.60

98 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

18.50.1 15 mm Nominal bore Each 2.00 715.10 Rupees Seven Hundred Fifteen and Ten Paise Only 1430.20

99 18.53 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

18.53.1 15 mm Nominal bore Each 10.00 500.40 Rupees Five Hundred and Forty Paise Only 5004.00

100 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating Each 12.00 169.70 Rupees One Hundred Sixty Nine and Seventy Paise Only 2036.40

101 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

18.22.1 100 mm diameter Each 2.00 166.30 Rupees One Hundred Sixty Six and Thirty Paise Only 332.60

102 18.52 Providing and fixing C.P. brass stop cock ( concealed ) of standard design & of approved make conforming to IS 8931.

18.52.1 15 mm Nominal bore Each 2.00 594.80 Rupees Five Hundred Ninety Four and Eighty Paise Only 1189.60

103 18.33 Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:

18.33.1 With common burnt clay F.P.S (non modular) bricks of class designation 100 A Each 2.00 7210.60 Rupees Seven Thousand Two Hundred Ten and Sixty Paise Only 14421.20

104 18.48 Providing and placing on terrace polythethylene water storage tank ISI. :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (2000x2=4000) per litre 4000.00 9.70 Rupees Nine and Seventy Paise Only 38800.00

105 Derived (Drains) Supplying materials, labour for constructing Rcc drains of following sizes & as per sections given in the Drawings & Designs, all complete as per specifications and direction of Engineer-in-charge.

Drain type-D1 Rectangular Section, Width 350 mm x 500 mm Avg Deep (varying from 400 to 600 mm) Meter 350.00 5089.97 Rupees Five Thousand Eighty Nine and Ninety Seven Paise Only 1781489.50

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia Metre 97.20 391.70 Rupees Three Hundred Ninety One and Seventy Paise Only 38073.24

106 19.01 Providing, laying and jointing glazed stoneware pipes class SP-1 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

19.1.2 150mm diameter Meter 7.20 464.30 Rupees Four Hundred Sixty Four and Thirty Paise Only 3342.96

19.02 Providing and laying cement concrete 1:5:10( 1 cement: 5 coarse sand:10 graded stone aggregate 40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

19.2.2 150mm diameter S.W pipe Meter 7.20 494.40 Rupees Four Hundred Ninety Four and Forty Paise Only 3559.68

107 19.40 Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight CI cover with frame of 300X300mm size(inside) the wt. of cover to be not less than4.50kg. And frame to not less than 2.70 kg. as/standard design

19.4.3 180x150mmsize p type

19.4.3.1 With F.P.S. bricks designation 7.5 Each 6.00 1994.10 Rupees One Thousand Nine Hundred Ninety Four and Ten Paise Only 11964.60

108 19.60 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc.

19.6.2 150 mm dia R.C.C. pipe Metr. 84.00 410.70 Rupees Four Hundred Ten and Seventy Paise Only 34498.80

19.6.3 250 mm dia R.C.C. pipe Metr. 677.40 Rupees Six Hundred Seventy Seven and Forty Paise Only

109 19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:

19.7.1 Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 2.00 7914.70 Rupees Seven Thousand Nine Hundred Fourteen and Seventy Paise Only 15829.40

110 19.8 Extra for depth for manholes

19.8.1 Size 90x80cm

19.8.1.1 With F.P.S bricks class designation 75 Metre 0.20 5660.00 Rupees Five Thousand Six Hundred Sixty Only 1132.00

111 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line:

19.30.1.1 With F.P.S bricks Each 12.00 4266.80 Rupees Four Thousand Two Hundred Sixty Six and Eighty Paise Only 51201.60

112 19.31 Extra for depth beyond 45cm of brick masonry chamber:

19.31.1 For 455x610mm size

19.31.1.1 With F.P.S bricks Metre 1.20 3946.20 Rupees Three Thousand Nine Hundred Forty Six and Twenty Paise Only 4735.44

113 19.32 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with brick of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With F.P.S. bricks Each 4.00 33603.40 Rupees Thirty Three Thousand Six Hundred Three and Forty Paise Only 134413.60

Derived (Septic Tanks ) Supplying materials, labour for constructing Septic Tanks of following sizes & as per sections given in the Drawings & Designs, all complete as per specifications and direction of Engineer-in-charge.

D.1 Septic tank [5.0 mtr (long) x 1.5 mtr (wide) x 2.25 mtr (deep) {of inside finished size as per design & drawings}] Each 2.00 172672.00 Rupees One Lakh Seventy Two Thousand Six Hundred Seventy Two Only 345344.00

S3 Septic tank [6.0 mtr (long) x 2.0 mtr (wide) x 2.25 mtr (deep) {of inside finished size as per design & drawings}] Each 222162.00 Rupees Two Lakh Twenty Two Thousand One Hundred Sixty Two Only

D TUBE WELL X 1 NOS.

114 24.10 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.

24.1.1 All types of soil

24.1.1.1 300 mm dia Mtrs. 180.00 486.80 Rupees Four Hundred Eighty Six and Eighty Paise Only 87624.00

115 24.20 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

24.2.1 All types of soil

24.2.1.1 300 mm dia Mtrs. 60.00 567.90 Rupees Five Hundred Sixty Seven and Ninety Paise Only 34074.00

116 24.30 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.

24.3.1 100 mm nominal size dia Mtrs. 90.00 546.10 Rupees Five Hundred Forty Six and Ten Paise Only 49149.00

24.3.2 150 mm nominal size dia Mtrs. 60.00 660.10 Rupees Six Hundred Sixty and Ten Paise Only 39606.00

117 24.40 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia Metre 60.00 573.10 Rupees Five Hundred Seventy Three and Ten Paise Only 34386.00

24.4.2 150 mm nominal size dia Metre 673.50 Rupees Six Hundred Seventy Three and Fifty Paise Only

118 24.6 Supplying , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the Recharge Pit,over the existing layer boulders in the required thickness ,for all leads & lifts, . all complete as per direction of Engineer-in-charge Cum 1195.60 Rupees One Thousand One Hundred Ninety Five and Sixty Paise Only

119 24.80 Gravels packing in tubewell construction in accordance with IS 4097 including providing graval fine/medium/coarse,in required grading & sizes as per actual requirement,all complete as per direction of Engineer-in charge. cu_m 14.16 1343.20 Rupees One Thousand Three Hundred Forty Three and Twenty Paise Only 19019.71

120 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hrs 72.00 916.80 Rupees Nine Hundred Sixteen and Eighty Paise Only 66009.60

121 24.13 Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/ casing pipe ,removable as per requirement,all complete for borewell of,

24.13.2 150 mm dia each 2.00 210.70 Rupees Two Hundred Ten and Seventy Paise Only 421.40

122 24.14 Providing & fixing MS clamp of required dia to the top of housing/casing pipe of,removable as pe tubewell as per IS;2800(part-I), including necessary bolts & nuts of required size complete

24.14.2 150 mm dia each 2.00 1531.40 Rupees One Thousand Five Hundred Thirty One and Forty Paise Only 3062.80

123 24.15 Providing & fixing Bail plug/ bottom plug of required dia to the bottom of pipe assembly as per IS;2800(part-I),

24.15.1 100mm dia each 2.00 228.30 Rupees Two Hundred Twenty Eight and Thirty Paise Only 456.60

24.15.2 150 mm dia each 281.80 Rupees Two Hundred Eighty One and Eighty Paise Only

E RAIN WATER PIPE

124 12.78 Providing and fixing on wall face PVC (working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.78.2 110 mm diameter Metre 16.00 257.50 Rupees Two Hundred Fifty Seven and Fifty Paise Only 4120.00

125 12.79 Providing and fixing on wall face PVC moulded fitting / accessories for rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.79.1 Coupler

12.79.1.2 110 mm Each 4.00 120.00 Rupees One Hundred Twenty Only 480.00

12.79.2 Single pushfit Coupler:

126 12.79.2.2 110 mm Each 4.00 374.60 Rupees Three Hundred Seventy Four and Sixty Paise Only 1498.40

127 12.79.5.2 110 mm bend Each 8.00 132.00 Rupees One Hundred Thirty Two Only 1056.00

128 12.80 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

12.80.2 110 mm Each 16.00 182.72 Rupees One Hundred Eighty Two and Seventy Two Paise Only 2923.52

129 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Each 4.00 47.90 Rupees Forty Seven and Ninety Paise Only 191.60

Total Amount SOR (B) After Applying GST Impact factor 1.0536 3220763.38

S.O.R 1.3.3 (C) Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable Cl box and earthing the point with 1.5 sq. min. FR PVC insulated copper conductor single core cable etc as required. Group C Point 80.00 1146.00 Rupees One Thousand One Hundred Forty Six Only 91680.00

1.24.1 1.24.4 Supplying and fixing 5 pin, 5/6 amps socket outlet and 5/6 amps Modular type switch connection etc up-on switch board, as required.all complete as per instructions of Elec.Er / Architect. Set 8.00 194.00 Rupees One Hundred Ninety Four Only 1552.00

1.31 Supplying and fixing 1nos Modular type 6Amp 5pin socket with 6Amps switch, Modular Plate, suitable size PVC/G.I. box as required. all complete as per instructions of Elec.Er. / Architect. Each 23.00 414.00 Rupees Four Hundred Fourteen Only 9522.00

1.56 Supplying and fixing suitable size GI box with rnodular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. Set 0.00 778.00 Rupees Seven Hundred Seventy Eight Only 0.00

S0R 1.32 Supplying and fixing 1nos Modular type 15Amp 6 pin socket with 15Amps switch, Modular Plate, suitable size PVC/G.I. box as required. all complete as per instructions of Elec.Er. / Architect. Each 20.00 531.00 Rupees Five Hundred Thirty One Only 10620.00

2.19 Supplying and fixing 20Amp 240 volts SPN MCB industrial type, power socket with 25Amp SPN MCB and 25 Amps Top in proper size steel box and plate as required. all complete as per instructions of Elec.Er. / Architect. Each 4.00 1513.00 Rupees One Thousand Five Hundred Thirteen Only 6052.00

2.32 Supplying and fixing Cable end box (Loose wire box, lP43) suitable for following pole and neutral, sheet steel, MCB distribution board, 2401415 V, on surface /recess complete with testing and commissioning etc. as required. 0.00 0.00

2.32.1 For 6 way, Double door SPN MCBDB Each 0.00 111.00 Rupees One Hundred Eleven Only 0.00

2.32.2 For 8/10 way, Double door SPN I\4CBDB Each 5.00 798.00 Rupees Seven Hundred Ninety Eight Only 3990.00

2.32.3 For 14 way, Double door SPN MCBDB Each 0.00 872.00 Rupees Eight Hundred Seventy Two Only 0.00

2.32.4 For 4 way, Double door TPN MCBDB Each 1.00 1064.00 Rupees One Thousand Sixty Four Only 1064.00

2.32.5 For 6 way, Double door TPN MCBDB Each 0.00 1111.00 Rupees One Thousand One Hundred Eleven Only 0.00

2.32.6 For 8 way, Doubte door TPN MCBDB Each 0.00 1342.00 Rupees One Thousand Three Hundred Forty Two Only 0.00

2.32.7 For Vertical, Double door TPN MCBDB Each 0.00 1161.00 Rupees One Thousand One Hundred Sixty One Only 0.00

2.33 Supplying and fixing , following ways, surface/recess mounting, Vertical type three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as lncomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCB) 0.00 0.00

2.33.1 4 way, Double door, l/C 1604, MCCB Each 0.00 72701.00 Rupees Seventy Two Thousand Seven Hundred One Only 0.00

2.33.2 6 way, Double door, l/C 1604, MCCB Each 0.00 13710.00 Rupees Thirteen Thousand Seven Hundred Ten Only 0.00

2.33.3 B way, Double door, l1C 1604, MCCB Each 0.00 15057.00 Rupees Fifteen Thousand Fifty Seven Only 0.00

2.33.4 12 way, Double door, l/C 1604, MCCB Each 0.00 24449.00 Rupees Twenty Four Thousand Four Hundred Forty Nine Only 0.00

2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCBilsolator) 0 0.00

2.8.L 2+2 way, Single door Each 0.00 1441.00 Rupees One Thousand Four Hundred Forty One Only 0.00

2.8.2 2+4 way, Single door Each 0.00 1399.00 Rupees One Thousand Three Hundred Ninety Nine Only 0.00

2.8.3 2+6 way, Single door Each 0.00 1713.00 Rupees One Thousand Seven Hundred Thirteen Only 0.00

2.8.4 2+10 way, Single door Each 0.00 1972.00 Rupees One Thousand Nine Hundred Seventy Two Only 0.00

2.8.s 5 way, Double door Each 0.00 2997.00 Rupees Two Thousand Nine Hundred Ninety Seven Only 0.00

2.8.6 8 way, Double door Each 5.00 2591.00 Rupees Two Thousand Five Hundred Ninety One Only 12955.00

2.8.7 12 way, Double door Each 0.00 2374.00 Rupees Two Thousand Three Hundred Seventy Four Only 0.00

2.8.8 14 way, Double door Each 0.00 3201.00 Rupees Three Thousand Two Hundred One Only 0.00

2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator) 0.00 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type Each 1.00 4184.00 Rupees Four Thousand One Hundred Eighty Four Only 4184.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type Each 0.00 5132.00 Rupees Five Thousand One Hundred Thirty Two Only 0.00

2.9.3 B way ( 4 + 24 ), Double door, horizontal type Each 0.00 6199.00 Rupees Six Thousand One Hundred Ninety Nine Only 0.00

2.1 Supplying and fixing following way, Vertical type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/lsolator) 0.00 0.00

2.10.1 4+ wby ( 4 + 12 ), Double door, Vertical type Each 0.00 4784.00 Rupees Four Thousand Seven Hundred Eighty Four Only 0.00

2.10.2 8 way ( 4 + 24 ), Double door, Vertical type Each 0.00 5132.00 Rupees Five Thousand One Hundred Thirty Two Only 0.00

2.10.3 12 way ( 4 + 36 ), Double door, Verticat type Each 0.00 6199.00 Rupees Six Thousand One Hundred Ninety Nine Only 0.00

2.12 Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required 0.00 0.00

2.12.L 6 A to 32'A, Single pole Each 11.00 237.00 Rupees Two Hundred Thirty Seven Only 2607.00

2.12.2 6 A to 32 A, SP&N Each 5.00 606.00 Rupees Six Hundred Six Only 3030.00

2.L2.3 6Ato32A,TP Each 0.00 1044.00 Rupees One Thousand Forty Four Only 0.00

2.12.4 6 A to 32 A, TP&N Each 1.00 1282.00 Rupees One Thousand Two Hundred Eighty Two Only 1282.00

2.L2.5 40 A to 63 A, Single pole Each 0.00 551.00 Rupees Five Hundred Fifty One Only 0.00

2.12.6 40 A to 63 A, SPN Each 0.00 1233.00 Rupees One Thousand Two Hundred Thirty Three Only 0.00

7.12.7 40 A to 63 A,.TP Each 0.00 1859.00 Rupees One Thousand Eight Hundred Fifty Nine Only 0.00

2.12.8 40 A to 63 A, TP&N Each 0.00 2379.00 Rupees Two Thousand Three Hundred Seventy Nine Only 0.00

1.7.2 Wiring for 6mts.Pole Two arms and singale arm light point wiring along with earth wire with 2x2.5 sq. mm +1x2.5 FR PVC insulated copper conductor single core cable in face / recessed medium PVC conduit. as required, all complete as per instructions of Elec.Er./ Architect. (104 pole x 10mts=1040 mts Each 173.00 246.00 Rupees Two Hundred Forty Six Only 42558.00

2.18 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00

2.18.1 25 Amps Each 2.00 2703.00 Rupees Two Thousand Seven Hundred Three Only 5406.00

2.18.2 40 Apms Each 2.00 3348.00 Rupees Three Thousand Three Hundred Forty Eight Only 6696.00

1.33 Supplying and fixing ceilling rose 2 pin 6amps on exisiting junction box/ wooden block including connection etc. as required. Each 10.00 64.00 Rupees Sixty Four Only 640.00

1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 11.00 80.00 Rupees Eighty Only 880.00

1.23.9 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. Each 9.00 311.00 Rupees Three Hundred Eleven Only 2799.00

1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00 0.00

1.7.1 2x1.5 sq. Mm +1x1,5 sq. Mm earth wire Metre 135.00 201.00 Rupees Two Hundred One Only 27135.00

1.7.2 2x2.5 sq. Mm +1x2.5 sq. Mm earth wire Metre 340.00 246.00 Rupees Two Hundred Forty Six Only 83640.00

1.7.3 2x4sq. Mm +1x4 sq. Mm earth wire Metre 357.00 309.00 Rupees Three Hundred Nine Only 110313.00

1.7.4 2x6sq. Mm +1x6 sq. Mm earth wire Metre 117.00 422.00 Rupees Four Hundred Twenty Two Only 49374.00

1.7.8 4X4sq.mm+ 1X4sq.mm earth wire Metre 0.00 677.00 Rupees Six Hundred Seventy Seven Only 0.00

1.7.9 4X6sq.mm+ 1X4sq.mm earth wire Metre 0.00 924.00 Rupees Nine Hundred Twenty Four Only 0.00

1.7.10 4X10sq.mm+ 1X4sq.mm earth wire Metre 0.00 1166.00 Rupees One Thousand One Hundred Sixty Six Only 0.00

L.T LINE CANTROL PANEL-125A TPN 0.00 0.00

2.4.5 Providing and fixing 250A, rating and 36 ka.breaking capacity MCCB (TPN) in made of existing1.6mm thick sheet steel enclosure duly painted with powder coating, wall straps cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required Each 0.00 18646.00 Rupees Eighteen Thousand Six Hundred Forty Six Only 0.00

2.12.2 Supptying and fixing 32A rating, 220 volts, SPN "C"curve, miniature circuit breaker suitable for inductive loads of two poles in the existing panel complete with connections, testing and commissioning etc. as required' Each 7.00 606.00 Rupees Six Hundred Six Only 4242.00

2.12.4 Supptying and fixing 32A rating, 415 volts, TPN "C"curve, miniature circuit breaker suitable for inductive loads of two poles in the existing panel complete with connections, testing and commissioning etc. as required' Each 1.00 1282.00 Rupees One Thousand Two Hundred Eighty Two Only 1282.00

8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc asrequired. Each 0.00 6536.00 Rupees Six Thousand Five Hundred Thirty Six Only 0.00

2319 Providing and fixing slector switch for analog ammmeter as per require load in amps on front side in excluding cubical panel as required. Each 0.00 298.00 Rupees Two Hundred Ninety Eight Only 0.00

2313 Providing and fixing Pilot lamp for indicator on front side in excluding cubical panel as required. Each 1.00 148.00 Rupees One Hundred Forty Eight Only 148.00

2.2 Providing and fixing M.V danger notice plate of 200mmx150mm made of mild steel at least 2mm thick, vitreius enameled white on both side and with inscription in singale red colour on front side in excluding cubical panel as required. Each 0.00 214.00 Rupees Two Hundred Fourteen Only 0.00

8.12 Supply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.) SQ. FT 4.00 2261.00 Rupees Two Thousand Two Hundred Sixty One Only 9044.00

SUPPLY & MAKING OF EARTHPITS 0.00 0.00

3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for eafth electrode to fill up the excavated earth and earth inspection pit etc. as required. Each 1.00 16675.00 Rupees Sixteen Thousand Six Hundred Seventy Five Only 16675.00

3.17 Supplying and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40.00 144.00 Rupees One Hundred Forty Four Only 5760.00

SUPPLY OF FIXTURES & FANS 0.00 0.00

2. 5.4 Supplying and fixing replaceable compact commercial batten suitable for Singal TB LED tube complete with 20 watt LED polycarbonate TB tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. asrequired. Each 0.00 834.00 Rupees Eight Hundred Thirty Four Only 0.00

5.8 Supplying and fixing reces mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00 0.00

5.8.3 18 watt Each 54.00 1694.00 Rupees One Thousand Six Hundred Ninety Four Only 91476.00

8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street Iight pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm, small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) 0.00 0.00

8.22.1 Single arm, 1000 mm Each 1 24982.00 Rupees Twenty Four Thousand Nine Hundred Eighty Two Only 24982.00

8.22.2 Double arm, 1000 mm Each 17.00 26191.00 Rupees Twenty Six Thousand One Hundred Ninety One Only 445247.00

6.3.5 Supplying and fixing of For 120 watt LED street light types LED Electronic driver in the existing LED street Iight etc as required. Each 34 3101.00 Rupees Three Thousand One Hundred One Only 105434.00

8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 9.00 2482.00 Rupees Two Thousand Four Hundred Eighty Two Only 22338.00

8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00 0.00

8.17.1 300 mm sweep Each 1.00 2572.00 Rupees Two Thousand Five Hundred Seventy Two Only 2572.00

8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required Each 11.00 3670.00 Rupees Three Thousand Six Hundred Seventy Only 40370.00

SUPPLY &LAYING MAIN & SUBMAIN OF CABLE ) 0.00 0.00

7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00 0.00

7.7.11 95 sq. mm, 3.5 core Metre 17.00 950.00 Rupees Nine Hundred Fifty Only 16150.00

7.7.1 6 sq. mm, 2 core Metre 36.00 159.00 Rupees One Hundred Fifty Nine Only 5724.00

7.7.4 10 sq. mm, 2 core Metre 14.00 249.00 Rupees Two Hundred Forty Nine Only 3486.00

7.1 Laying of one number PVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00 0.00

7.1.1 Upto 35 sq. mm Metre 0.00 315.00 Rupees Three Hundred Fifteen Only 0.00

7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 15.00 326.00 Rupees Three Hundred Twenty Six Only 4890.00

7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 0.00 336.00 Rupees Three Hundred Thirty Six Only 0.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm Metre 0.00 368.00 Rupees Three Hundred Sixty Eight Only 0.00

BOQ NSR For Development Of Lord Shiva Statue Park At Tarapur, Near Teldiha Temple.

S.No Sor Code Description of Items Unit Total Quantity Amount to be Quoted by Bidder

CIVIL NSR ITEMS (A')

1 NSR-1 Providing and fixing A1 Fencing 358 anti climb nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Sqm 2693.00

2 NSR-2 Providing and laying Cobble stone 50 mm thick of 125 mm x 125 mm size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge Sqm 5812.00

3 NSR-4 Providing and fixing lockable openable system Aluminum works for openable doors applications of Tostem or Equivalent make . The extruded aluminium sections should be made from T6 & Powder Coating with Texguard coating , silicon coated to suit marine atmosphere . All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame . The outer frame Depth will be 45 mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment.. The system should allow the application of glazing or panels with thickness up to 8mm. System should have a 25-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts only applies to normal and realistically foreseeable use. Sqm 24.00

4 NSR-5 Providing and fixing lockable openable system Aluminum works for openable doors applications of Tostem or Equivalent make . The extruded aluminium sections should be made from T6 & Powder Coating with Texguard coating , silicon coated to suit marine atmosphere . All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame . The outer frame Depth will be 45 mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment.. The system should allow the application of glazing or panels with thickness up to 8mm. System should have a 25-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts only applies to normal and realistically foreseeable use. Sqm 4.00

Total Amount Civil NSR Item (A')

PHE NSR ITEMS (B')

5 MR Providing & fixing wall wall hung w.c with UF soft close set over hinges assecerries set size 360x500x380 mm,Jaquar ,cat.no -LYS - WHT -38953BIUFSM. or equivalent & Concealed Single piece slim concealed cistern cat.no -JCS - WHT -2400WS.with Flusing Control plate cat.no -JCP -CHR -372415.all complete. specification and direction of Engineer-in-charge. Each

6 MR Providing and fixing counter basin size- (mm) 190x550x430 (Jaquar,CAT NO- FLS-wht-5701) including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each 12.00

7 MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

110 mm dia metre 132.00

40 mm dia metre 44.00

8 MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 mm vent cowel Each 8.00

110 mm plain bend Each 24.00

110 mm door bend Each 16.00

110 mm dia X 45 Bend Each 4.00

110 X 110 mm dia plain - y Each 4.00

110 mm pipe clip Each 32.00

110 X110 mm dia p-trap Each 12.00

40 mm elbow Each 48.00

40 mm plain tee Each 12.00

9 MR Providing Paper holder (jaguar AKP-35753PS) or Equivalent Each

10 MR Providing Towel Ring (Jaquar product No. AKP-35751P ) or equivalent Each

11 MR Soap dispenser (jaguar AKP-35735P) or equivalent Each

12 MR CP brass 2-way bib cock with wall flange(Kubix-F) 15mm(jaguar -KUP-35041PM) or equivalent Each

13 MR 110 mm dia cp jali Each

D TUBE WELL X 1 NOS.

MR Establishment of -2HP of submersible pump set of approved brand and make, all complete Each 2.00

MR Provding and fixing white vitreous urinal (Jaquar URS-WHT-132530) or equivalent with Aquisense Sensor concealed type flushing valve for Urinal complete set with installation box with control cock ,(jaquar CAT NO- SNR-STL-51087) etc. all complete. Each

MR Providing and fixing Curved shaped urinal partition with frosted glass finish: Chrome, size-900 H X 450 W (jaguar-JSE-CHR-110UC450X) or equivalent Glass: 10mm as per direction of Engineer-in-charge and finished smooth. Each

MR Providing and fixing Table top wash basin size- (mm) 500x425x130 (Jaquar,CAT NO- FLS-WHT-5935) or equivalent including fixing and all accessories as per manufacturers specification and direction of Engineer-in-charge. Each

MR Provding and fixing PVC Soil ,Waste & vent pipes all complete

40 mm dia metre

MR Provding and fixing PVC fittings all complete as/specification & directionof E/I

110 X 110 mm dia door tee Each

110 mm dia X 45 Bend Each

110 mm pipe clip Each

160 mm dia ( B- TYPE) metre

160 mm plain bend Each

160 mm door bend Each

160 X 110 mm Reducing-y Each

160 mm pipe clip Each

C.P. BRASS FITTINGS

MR CP brass 2-way bib cock with wall flange(Kubix-F) 15mm(jaguar -KUP-35041PM) or equivalent Each

MR 110 mm dia cp jali Each

MR Providing & Fixing angle stop cock ,15 mm dia nominal bore (Jaquar -KUP-35053PM) or equivalent Each

MR Providing & Fixing Soap Dish Holder (Jaquar product No. AKP-CHR-35731P) Each

MR Providing and Fixing Wall Mixer 3-in-1 System (Jaquar product No KUP-35125PM) Each

MR Providing and Fixing Overhead Shower with Arm (Jaquar product No OHS-35495 ) Each

MR Providing and Fixing Hand Shower with Shower Tube (jaquar Product No HSH-1717 ) Each

MR Providing Towel Rail (Jaquar product No. AKP-CHR-35701PS ) Each

Total PHE NSR (B')

ELECTRIC NSR ITEMS (C')

14 NSR-E1 Providing and fixing 3000 mm decorative pole light, made in mild aluminium diecast, laser cut, 60Watt Led and finished to colour of choice and Twinke Brand Lazer Model as per direction of engineer incharge or Architect Each 76.00

15 NSR-E2 Providing and fixing 1200 mm decorative pole light, made in mild aluminium diecast, laser cut, 20 Watt Led and finished to colour of choice and Twinke Brand Lazer Model as per direction of engineer incharge or Architect Each 30.00

16 NSR-E3 Providing and fixing 6wx2 Up down wall washer IP 66 Grade Ankur Brand as per direction of engineer incharge or Architect Each 24.00

17 NSR-E4 Providing and fixing 6watt Spike light IP68 Grade Ankur as per direction of engineer incharge or Architect Each 24.00

18 NSR-E5 Providing and fixing Ground Burial Light recessed Ankur as per direction of engineer incharge or Architect Each 76.00

19 NSR-E6 Providing and fixing Ground Burial linear Light recessed as per direction of engineer incharge or Architect Each 2.00

20 NSR-E7 Providing and fixing 6watt Base Mount light IP68 Grade as per direction of engineer incharge or Architect Each 18.00