Cable installation work for street lights on the divider between Raichur-Baachi State Highway-20, within the jurisdiction of Hunagunda Municipality. (Continuous work)

Cable installation work for street lights on the divider between Raichur-Baachi State Highway-20, within the jurisdiction of Hunagunda Municipality. (Continuous work)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975, 16 Sqm...

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part -II suitab...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches. Digging of Asphalt Road, (SR 2023...

Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches. Digging of CC Road, (SR 2023-24, ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 ...

Supplying andfixing of Modular MCB Devices(Tripper)With Breaking capacity of 6kA. 40 A SP (PWD SR 2023-24, Vol-6, It No-5.46.2, P.No-21)

Supplyin gand fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (PWD SR 2023-24, Vol-6, It No-5.48, P.No-21)