Work of installation of 30 octagonal poles with 45 watt LED lights in kabristan near by bajheri road sarwat (ward-7)

Supply & fixing of 7 mtr GI Octagonal pole of approved make (top dia 70mm bottom dia 130mm and base plate 12mm thickness) having 3mm thickness With single arm (1mtr length in 1:2:3 RCC foundation include the cost of foundation foundation bolts, excavation & back filling and requied T&P complete in all respect. PWD.-2018/PS NO-647

Supply and Fixing of L.E.D Street Light Fitting Having Die cast Aluminium Body and Diffuser With Driver set Suitable for 45 to 50 Watt. Confirming to IP 66 Protection complete in all respects. PS-NO-1421/CAT-AAA

Supply and Fixing of submain with 2 Nos of 2.5 square mm FRLSH PVC insulated 1100 volt grade single core multistand copper conducter cabil in Exiting conduit complete with supply of all matirial, labour and T&P required for proper completion of the work as directed at site by engineer incharge

Supply and Lying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. The cable shell be property connected with the earth conductor by clamps etc. 16 SQM 4 CORE SOR-NO-501/PWD/2018

supply and lying of following size HDPE pipe ISI marked alomg with accessories like socket, bend, couplers, etc. confirming to IS 14930, Part second complete with fiting and cutting, jointing etc. direct in gound (At suitable depth below ground level) etc. complete as required. 63mm dia (OD-63mm and ID-51mm nominal) as per market Rs.

Supply and burring of 75mm Dia 3 mtr. Long electrode casted with Maintenance Free, Conductive Concrete, non Corrosive Mixture (Ultra Low Resistive carbon 0.001 ohm/mtr) in ratio of 3:1:1 (Marconite: cement : water) on M.S Rod with hole (16 mm dia x 3 Mtrs) will be vertically installed for Earthing with 1 Mtr. G.I Strip (25mm x 2.5mm) connected with S.S nut bolt. The Earth Electrode will be installed into the 100mm pit up to 3000mm Depth. Normal Soil with be used as backfill Material. UP.PWD. Electrical SOR-2018 SI. NO. 729 (C)

Supply and fixing following capicity of automatic street light cubicle control panal painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100series with contactors HRC Fuses isolating switch matering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN SOR NO 807(F)

Supply and erection of 6 SWG GI wire on surface or in recess for loop earthing along with exiting surface/recessed conduit/submain wiring/cable as required.

supply and fixing of plain pin type copper cable socket (lug) S.NO.504

Supply and fixing 5A to 5A SP MCB (10ka)C curve as per UP PWD Electrical SOR- 2018 IS 1001