Electrification work in the shops of Tal Bazaar inside Digvijaynath Park under Ramgarhtal.

Amount

Supply and laying of 3 core standered aluminium conductor XLPE (cross linked polyethylene) insulated PVC bedded galvanised flat steel strip armoured cable confirming to I.S. 7098 ( part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be property connected with the earth conductor by clamps etc.(i) 120 sq mm 3 core. (Heavels/CCI/Polycab/Vmarc/Finolex)

S/F of outdoor type cable end termination jointing kit suitable for XLPE cable etc all complete. (i) 120 sq mm. (Make:-M-seal/ Raychem) as per IS 13573-1992

S/F of Double pole structure of S.P.-55 S.T. pole 11.00mtr. Long complete with all accassories including grouting & making plinth above 20cm G.L. in 1:3:6 C.C. with excavation and back filling etc. complete in all respect.

S/F of 11Kv TPMO set complete with G.I. rod handle etc. complete in all respect.

S/F of 11Kv D.O. fuse set etc. complete in all respect.

S/F. of 11000/430 Volt distribution cu- wound star- delta transformer 50Hz ONAN type star delta etc. as per I.S. specification and UPPCL rules complete in all respect for following capacity. Level-2 (ii) 400 KVA. (Approved by UPPCL) (Make:-Kirloskar, MEI/Mahindra, BHEL)

Construction of Transformer plinth of size 1.7x1.66x1Mtr. With all material required for proper completion of work as per PWD specification.

Cost of ACB plinth complete as per UPPCL.

S/E of 2.00 mtr hight 3.5x3.5mtr size case fabricated with 3mm thick expended metal or equielent welight wire mesh as per E/I fixed on 50x50x6mm Angle iron frame having vertical member shall be grouted in ground and horizental member in wall to a depth of 4500mm with end folded. The case shall have 2000x1000mm size one leaf door with locking arrangement having door frame fabricated with 35x35x6mm angle iron and 3mm expended metal wire mesh as per E/I. the case shall have nut bolt arrangement for opening of side it shall be painted with red oxide and synthetic enamel paint etc. The job shall have all material, labour T&P etc. for proper completion of work.

Instalation and testing and commisning of L.T. ACB complee with CTS and metering equipments with 800/1000 Amp. Complete inluding carriage loading, undloading erection, testing, earthing etc. complete as per UPPCL specifications for completion of work.

S/L "Al conductor PVC insulated and sheathed 1100 V. grade armered cable below 750mm G.L. the armouring of cable shall be proparly connected etc complete as following size.(Heavels/CCI/ Polycab/ Vmarc/Finolex)

(ii) 240 sq mmx3½ core

(iv) (m)70 sq.mm 3½ core

S/F of power cable, Aluminum conductor, XLPE Insulated cores laid up, PVC tape Inner sheathed, Unarmoured, extruded PVC type ST2 sheathed 1100V as per IS:7098-1-1988 4cx16sqmm, type A2XY

S/F of plain/pin type copper tin plated cable socket (Lugs) to the cable lead insulating with tape and making connection etc. complete in all respect.

(m) 240 sqmm

(j) 120 sqmm

(h) 70 sqmm

S/L ""AL"" conductor PVC insulated and sheathed 1100 V. grade armered cable below 750mm G.L. Protected with bricks on side and top with cushian of fine sand 75mm thick the cable run shall be fixed by clamp on surface and the armouring of cable shall be proparly connected etc complete as following size.(i) 10mmx4 core. (Heavels/CCI/Polycab /Vmarc /Finolex)

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50mm inner Dia 25mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Golvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30cm square C.I. frame with hinged cover & masonry housing. Make: As Approved in U.P. P.W.D., & C.P.R.I Certified.

Making suitable earthing of H.T./L.T. over head line pole with 2.5mlong 20mmdia G.I. rod with 7/16 SWG G.I. wire as per UPPCL complete in all material, labour T&P required for proper completion of work.

Supply of Fixing of 6 mtr. GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double pole arm bracket (1 Mtr Length) on RCC foundation including the cost of foundation, foundation, bolts, excavation & back filling and Required T&P complete in all respect.SOR-2018/S.No-648 (Philips/valmont/ havells/Osrom /Jaguar)

Supply and fixing of LED street light fitting having die cast aluminium body and diffiuser/reflector with driver set suitable for 50 watt. Confirming to IP 66 and above protection complete in all respect. CAT-AAA (PWD/18/C 1421 (Philips/valmont/ havells/Osrom /Jaguar)

S/F of 1.5 sq. mm PVC round sheathed multi core flexbile copper cable.

Supply and fixing Following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (E-ii) 25 AMP

S/L of HDPE (DWC) pipe for road crossing etc. (exept for cable support on pole) at a depth of 750mm below G.L. for L.T. calbe carriar as per direction of E/I. make Dura Line or Rack of following size . 90/76mm OD/ID.

S/F of 100mm dia G.I. pipe "B" class with M.S. clamp fixing with pole for calbe etc complete in all respect.

L.T DISTRIBUTION PANEL BOARD Incoming :-800 Amp Four Pole MCCB 1nos. 800 amp alluminium bus-bar 1set. Digital M/F Meter with C.T Coil 1set. 100 Amp Four Pole MCCB 1nos.

200 Amp Aluminium Bus-Bar Panel.

Supplying and installing following size of perforated Hot dipped G.I cable trays with perforation not more then 17.5% in convenient section, joined with connectors, suspended from the ceilling with G.I. suspenders including bolts & nuts, painting suspenders etc as required. 300mm width x 50mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot dipped G.I cable trays bends with perforation not more then 17.5% in convenient section, joined with connectors, suspended from the ceilling with G.I. suspenders including bolts & nuts, painting suspenders etc as required. 300mm width x 50mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot dipped G.I cable trays Tee with perforation not more then 17.5% in convenient section, joined with connectors, suspended from the ceilling with G.I. suspenders including bolts & nuts, painting suspenders etc as required. 300mm width x 50mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot dipped G.I cable trays Cross with perforation not more then 17.5% in convenient section, joined with connectors, suspended from the ceilling with G.I. suspenders including bolts & nuts, painting suspenders etc as required. 300mm width x 50mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot dipped G.I cable trays Reducer with perforation not more then 17.5% in convenient section, joined with connectors, suspended from the ceilling with G.I. suspenders including bolts & nuts, painting suspenders etc as required. 300mm width x 50mm depth x 1.6 mm thickness.

M/s S.B.S. Traders