REPAIR REPLACEMENT AND MAINT OF STREET LIGHTS SECURITY LIGHT GATE LIGHTS FOOT PATH LIGHTS AND MAINT OF DG SETS AMF PANELS AND LIGHTENING CONDUCTORS EARTHING AND MAINT OF LT DISTRIBUTION ELECTRIC SUPPLY UG CABLES LT PANEL BOARDS MCCBS AND EART

Amount

Taking down carefully copper/aluminium point wiring( light ,fan, socket or power) complete, fitting such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and as directed by Engineer-in-Charge.

M&L for point wiring using and including 2 runs of 1.5sq mm PVC insulated single core unsheathed 1100 V grade IS -694 stranded copper conductor FRLS cable drawn through and including surface rigid PVC conduit not less than 20 mm dia on wall / surfaces including one run of single core 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FRLS cable for continuous earth wire connected to main earth dolly for one light point controlled by one switch complete all as specified and as directed by Engineer in Charge.

All as per srl item 2 above but for one Ceiling fan/ Exhaust fan point controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

All as per item No 2 above but for one 3 pin 5 amps socket outlet on independent board complete all as specified and as directed by Engineer-in-Charge.

All as per item No 2 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as specified and as directed by Engineer-in-Charge.

All as per item No 2 above but with 2.5 Sqmm PVC insulated stranded copper conductor cable for one 3 pin 15 Amps socket outlet drawn through and including rigid PVC conduit concealed in ceiling / floor / wall or on surface including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FLRS cable for continuous earth wire complete all as specified and as directed by Engineer-in-Charge.

M&L for point wiring using and including 2 runs of 1.5 Sqmm PVC insulated copper conductor single core cable drawn through and including PVC Casing/capping with using one run of 1.5 Sqmm PVC insulated copper conductor cable for continuous earth wire connected to main earth dolly complete for one light point controlled by one switch complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 7 above but for one fan point controlled by one switch through regulator complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 7 above but for one 5 pin 5 amps socket outlet on the independent board complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 7 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 7 above but with and using 2 runs of 2.5 Sqmm PVC insulated stranded copper conductor cable for one 3 pin 15 Amps socket outlet. In and including one run of single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FR cable for continuous earth wire complete all as specified and directed by Engineer-in-Charge.

S&F in replacement switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site. Make : Anchor penta PC

S&F in replacement switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed at site. Make : Anchor penta PC / Kinjal / SSK

S&F in replacement socket outlet 3 pin 5 Amps all as specified and directed at site.

S&F in replacement socket 16 Amps, 2 in 1, flush type all as specified and directed at site.

Supply and fixing in replacement ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body all as specified and directed at site.

Supply only in replacement bell push, flush type, 5 Amps, 240 volts all as specified and directed at site.

Supply only in replacement Electric calling Bell Ding Ding Type suitable for 230 volts. Make: Anchor / Kinja l /SSK

Supply only Fan Regulator electronic step type 120 watt, 240 volt complete. Make : Havells / Anchor / SSK.

M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm complete for One light / fan point controlled by one switch one way all as specified and as directed by Engr-in-Charge.

All as per item No. 20 above but for one 3 pin 5 amps socket outlet on indipendent board with other switches complete all as specified and as directed by Engr-in-Charge.

All as per item No. 20 above but for one 3 pin 5 amps socket outlet on the same board with other switches complete all as specified and as directed by Engr-in-Charge.

All as per item No. 20 above but for one light point controlled by 2 Nos two way switches complete all as specified and as directed by Engr-in-Charge..

All as per item No. 20 above but for Call bell controled by one push button in indipendent board complete all as specified and as directed by Engr-in-Charge.

All as per item No. 20 above but using and including 2.5 Sq mm cable for one 3 pin 15 Amps socket outlet including single core 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps with screw and necessary arrangement complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 26 above but for one 5 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 26 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

M & L for submain wiring with 2 Run of 4.0 Sqmm cable and one run of 4.0 sqmm drawn through and including rigid non-metalic PVC conduit medium grade, ISI marked (not less than 20mm dia) FRLS cable single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade IS:694 marked complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface conduit on wall/ceiling complete all as specified and as directed by Engineer-in-charge. Note : 2 Run of main cable, one run of earth continuity condctor & one run of PVC pipe shall be measured as one Run. Complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 29 above but with 2 single core 06 Sqmm as main wire and one single core 4 Sqmm PVC insulated single core copper conductor cable as continuous earth wire complete all as specified and as directed by Engineer-in-charge.

All as per Item No. 29 but with 2 single core 10 Sqmm as main wire and one single core 6 Sqmm PVC insulated single core copper conductor cable for continuous earth wire complete all as specified and as directed by Engineer-in-charge. .

M & L for rigid non metalic PVC medium grade conduit in repairs including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

M&L for cutting/chasis in brick wall/floor n.exc 10 cm girth for connecting conduit wiring and making good distributed surfaces in CM 1 : 3 finished even and smooth to match the adjoining surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole 230 volt MCB 20 amps complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repairs wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply and fixing in repairs decorative LED wall light Nickel fitting premium opal glass for reduced glare designed for use with energy saving light bulbs suitable for 9/11 watt LED with 100 lumen/watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block, and testing complete all as specified and directed by the Engineer-In- Charge.

Supply and fixing in repairs ultra slim surface decorative 12 watt with 90 lumen/watt, 6000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make : Havells / Philips / Crompton Greaves

Supply and fixing in repairs wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and as directed by the Engineer-In- Charge.

S&F in repairs ultra modern design architectural design 34 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 250 Amps for incomer and MCBs for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable forTP/FP 'A' frame MCCB of 125 Amps for incomer and MCBs for outgoing comlete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type Cat Part No - DHDPSHODRW08 complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent to Standard / Asian Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type regal gray horizontal type Cat Part No - DHDPSHODRW08 complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent to Standard / Asian Note :- MCB shall be measured and paid seperately.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 16 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells / L&T / Legrand.

Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 40 amps C Curve capacity. Make: Havells / C&S / Standard

Supply and fixing in replacement MCBs 10 KA breaking capacity, single pole, and neutral, 240 volts, 40 amps C Curve capacity. Make: Havells / C&S / Standard

S&F in replacement MCB TPN 63 Amps 10 KA, 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells / C&S / Standard

S&F in replacement MCB TP 100 Amps 10 KA 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells / C&S / Standard

S&F in replacement of domestic use electronic ballast suitable for FTL 1X36/40 watt Make - Havells / Bajaj / philips.

S&F in replacement of domestic use electronic ballast suitable for FTL 1X28 watt Make - Havells / Bajaj / philips.

S&F in replacement electronic ballast 1 x 14 watt. Make : Philips / Havells / CG

S&F in replacement of Starter universal for 240 volt 18/20/36/40 watt FTL. Make- Havells / Bajaj / philips.

S&F in replacement tube rod 14 watt, T5, 6500 K cool white. Make: Philips / Havells / CG.

S&F in replacement LED Tube rod 18 watt complete all as specified. Make : Philips / CG / Havells

S&F in replacement LED Tube rod 20 watt complete all as specified. Make : Philips / CG / Havells

S&F in replacement of LED Bulb retrofit type 9 watt complete all as specified. Make - Havells Osram / Philips / Bajaj.

S & F in replacement of 10 watt LED focus light decorative type light fitting fixed on wall with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed by engineer-in- charge.

Supply and fix in replacement of ceiling light with 21 watt LED Recess mounted LED downlighter elegantly designed pressure die -cast aluminium heat dessipation and separate replaceable electronic driver including cutting ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make : Havells Cat No LHEBJNP7QZ1W021 or its equivalent in Philips / CG.

Supply and fix in replacement of ceiling light with 15 watt LED Recess mounted pressure die -cast aluminium luminare in powder coated white finish in round profile with optimized heat sink for efficient heat dessipation and separate replaceable electronic driver including cutting ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make : Havells Cat No LHEBJNP7QN1W015 or its equivalent in Philips / CG.

S&F in replacement of fan capacitor with copper wire plastic body 2.5 mfd.

S&F in replacement of fan capacitor with copper wire plastic body 3.15/4.0 mfd.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanised iron earht strip 25x4mm thick fixed by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia upto 3m height above ground level and water pipe 20mm dia GI medium grade with socket and plug 30 cm above ground level including earthwork, PCC chamber in PCC (1:3:6) type C-2 using 40mm stone aggregate, cast iron cover, wire meah etc all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete and all as specified and direcrted by Engr-in-charge Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI strip connecting upto pump,Gen set,LT panel and DBs earth connection is included in this item. (iii) GI pipe 40 mm dia protection pipe shall be provided upto Ground level.

Taking down the old white hylium sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 8" x 10" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 63 above but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 63 above but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No. 63 above but of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Non Retrofit CFL 9 watt two pin 2700K (Yellow colour) complete all as specified. Make : Bajaj / Havells / Philips.

S&F in replacement Non Retrofit CFL 11 watt two pin 2700K (Yellow colour) complete all as specified. Make : Bajaj / Havells / Philips.

Excavation in trenches , n exc 1.5m wide and n exc 1.5m in depth , for foundation , etc or for shaft, well, cesspits , manholes , pier hole etc n exc 1.5 m in depth and getting out complete.

Returning , filling in including, spreading , levelling , watering and well reamming in layers not exc. 25 cm complete

Removing excavated material n exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

Sand filling under flooors or in foundation for cable protection including and consolidation as as specified and directed at site.

M & L brick sub class 'B' locally available best quality laid in trenches above sand consolidted for cable protection complete all as specified and directed.

M&L for boring hole across the road/plinth/hard standing by trench less technology method suitable for up to 100 mm bore pipe for 0.4 mpa working pressure for cable passing without damiging Road/plinth/floor complete all as specified and directed.

Supplying, laying, jointing and testing in repairs / replacement XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 50 sqmm 4 core conforming to IS- 1554 laid in trenches/ducts/along poles/ through pipes complete all as specified & directed by Engineer-in- charge. Note: Excavation & earth work sand cushioning and brick protection shall be measured & paid separately under appropriate item of this Schedule.

Supplying, laying, jointing and testing in repairs / replacement XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 25 sqmm 4 core conforming to IS- 1554 laid in trenches/ ducts/ along poles/ through pipes complete all as specified & directed by Engineer-in- charge. Note: Excavation & earth work sand cushioning and brick protection shall be measured & paid separately under appropriate item of this Schedule.

Supplying, laying, jointing and testing in repairs / replacement XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 6 sqmm 2 core conforming to IS- 1554 laid in trenches/ ducts/ along poles/ through pipes complete all as specified & directed by Engineer-in- charge. Note: Excavation & earth work sand cushioning and brick protection shall be measured & paid separately under appropriate item of this Schedule.

Supplying, laying, jointing and testing in repairs / replacement XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 120 sqmm 3.5 core conforming to IS- 1554 laid in trenches/ ducts/ along poles/ through pipes complete all as specified & directed by Engineer-in- charge. Note: Excavation & earth work sand cushioning and brick protection shall be measured & paid separately under appropriate item of this Schedule.

Supplying, laying, jointing and testing in repairs / replacement XLPE insulated,screened,PVC beded,galvanised steel strip or wire armoured,clectric power cables (heavy duty)with aluminium conductor HT cable 1100 volts grade with cross sectional area 240 sqmm 3.5 core laid in trenches/ ducts/ along poles/ through pipes complete all as specified & directed by Engineer-in- charge. Note: Excavation & earth work sand cushioning and brick protection shall be measured & paid separately under appropriate item of this Schedule.

Supply and install in repairs change over switch ON LOAD type 415 Volt, 3 phase,4 pole of capacity 400 Amps in sheet metal enclosure complete all as specified and as directed.

Supply and fix in repair hot moulded FRP looping /Junction box size 280 mmx200 mm for street light poles with locking arrangement and suitable connection for three phase incomming cable 3 phase out going cable and single phase connection for light fitting incl controlled MCB SP-10 Amps -01 Nos enclosed in thermo plastic in closed shock froof safe IP-65, weather,vermin proof,dust and water proof complete with two nos cables entry incl gland of standard size with suitable size mild steel clamps to fixed on pole complete all as specified. Make : Neptune / Hensel / Sintex

S & F in repairs / replacement MCCB 4 pole 415 V, microprocessor based release adjustable type 250 amps with breaking capacity of 36 KA all as specified and directed.

S & F in repairs / replacement MCCB 4 pole 415 V, microprocessor based release adjustable type 200 amps with breaking capacity of 36 KA all as specified and directed.

M&L for jointing of LT cable of size 300/240 sq mm 3.5 core with cable jointing kit with all acessories and suitable compound filling after cutting the damage/faulty LT cable carefully including necessary earth work and making good the disturbed saurface and testing after coplition complete all as specified and as directed.

M&L for jointing of LT cable of size upto 185 sq mm 3.5 core with cable jointing kit with all acessories and suitable compound filling after cutting the damage/faulty LT cable carefully including necessary earth work and making good the disturbed saurface and testing after coplition complete all as specified and as directed.

S&F in replacement of LED Bulb small thread type 12 watt complete all as specified. Make : Havells Osram / Philips / Bajaj.

S & F in repairs / replacement MCCB 4 pole 415 V, microprocessor based release adjustable type 400 amps with breaking capacity of 36 KA all as specified and directed.

Supply and install in repairs / replacement change over switch ON LOAD type 415 Volt, 3 phase,4 pole of capacity 630 Amps in sheet metal enclosure complete all as specified and as directed.

S & F GI tube light grade galvanised of size 80 mm with all fitting and fixed to wall and celling or laid in floors/under road etc complete all as specdied and directed by Engineer-in- Charge.

Supply and fix in repairs street light timer box 3 phase,40 Amps complete with all accessories i.e MCB 40 Amps TPN, digital time switch 24 Hrs, contactor,fuse unit,indicatot lamp,rotary switch and in coming and out going connector etc including prewired complete all as specified. Make : Havells ,Cat No: IHXTS03060 or Equivalent in L&T / CG

M& L for Fabricate, supply and install cubicle type, CPRI approved LT panel board,indoor type, totally enclosed,dust & vermin proof (protection class IP 65) front opening with self locking arrangment made out of MS angle iron frame work, MS flat iron and CRCA sheet of 3.15 mm thick as per IS 5039 duly painted with powder coated paint of approved shade. The panel shall be suitable for 415 volts,50 Hz, 3 phase 4 wire system and shall be complete with 800 amp capacity copper bus bar, wiring the panel board with suitable size of PVC insulated, multi stranded copper cables and all connected acessories required for functioning of panel board such as thimbles,glands, bolts, nuts,washers etc including supply and fixing following acessories:-

Incoming:- (a) MCCB, 4 pole, 400 amp current carrying capacity, 50 Hz, 415 volt with rupturing capacity 36 KA - 01 No ( Incoming). (b) Digital type volt meter - set 01 (c) Digital type ammeter with suitable rating CTs conforms to relevent IS specification,- set 01 (d) LED type indicator lamp set of red , yellow and blue - set 01 Outgoings:- (a) MCCB, 4 pole, 250 Amp current carrying capacity, 50 Hz, 415 volt with rupturing capacity 16 KA -2 Nos. (b) MCCB, 4 pole, 160 Amp current carrying capacity, 50 Hz, 415 volt with rupturing capacity 16 KA - 02 Nos. (c) MCCB, 4 pole, 125 Amp current carrying capacity, 50 Hz, 415 volt with rupturing capacity 16 KA - 02 Nos

Maintenance and general servicing of following capacities DG set of any make by replacing oil filter, fuel filter, air cleaner, hose for air cleaner and topping up of coolant etc. complete including general cleaning including cleaning of accoustic enclosures of DG set with the help of air blowers complete all as specified and as directed by the Engineer-In- Charge..

400 KVA DG set located at DIT

160 KVA DG set located at AFRO

140 KVA DG set located at AFCAO

125 KVA DG set located at CSDO Note: (i) Necessary tools and Cleaning materials required for the above work shall be provided by the contractor . (ii) Cost of spares will be measured and paid seperately under respective items here-in-after.

Disconnecting all electrical cable connections from the dynamo assembly and taking down the dynamo assembly for carrying out repairs and complete overhauling the system including replacing the unserviceable parts like Carbon brushes, Bearings, Armature. Burnt out coils etc. reassembling and re-fixing the dynamo assembly to its original position and reconnect all disconnected the cable connections including testing complete of the following capacities of DGs all as specified and directed by engineer - in - charge.

160 KVA DG set located at AFRO

140 KVA DG set located at AFCAO

125 KVA DG set located at CSDO

Supply & Fix of 24 Volts 30 Amps Battery Charger panel mounting type including removing of the unserviceable from the existing position complete all specified and directed by engineer- in- charge.

Supply and fix in replacement of lead acid Maintenance free batteries 180 AH, 12 V, 25 plates complete all as specified and directed. Make : Exide / Amarraja / Sukam

Supply and connect maintenance free lead acid battery 12 Volt, 135 AH. complete all as specified and directed. Make : Exide / Amarraja / Sukam

Draining out the fuel from the fuel tank of DG Set of various capacity and keeping it in separate container, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, cleaning the fuel tank both internally and externally by removing all the accumulated dust / sediments, leak testing the tank and welding / brazing, including one coat of black synthetic enamel paint over a coat of red oxide and re-fixing the tank to its original position, replacing the drain plug and PVC pipe protected with steel flexible pipe, calibrating the fuel tank, refilling the drain out fuel back into the tank and provision of locking arrangements complete all specified and directed by engineer- in- charge.

Disconnecting and taking down the defective / unserviceable DC wiring and rewiring with same size of cable including supply and replacing of complete wire with flexible pipe, control cable including testing complete for following capacities of DG Set complete all specified and directed by engineer- in- charge :-

160 KVA DG set located at AFRO

140 KVA DG set located at AFCAO

125 KVA DG set located at CSDO

Supply and replacement of following spares for ‘B’ check of following capacities of DG sets:-

400 KVA DG Set located at DIT Lubricating oil filter with ‘O’ ring

Lubrication by pass filter with rubber washer

Inobirated Corrosion

Element fuel filter

Element air cleaner outer

Element air cleaner inner

CR Plates

Diesel Filter

Air filter – Inner

Air Filter-Outer

fule pipe

Ignition switch

Nozzle

160 KVA DG Set located at AFRO Lubricating oil filter with ‘O’ ring

Lubrication by pass filter with rubber washer

Inobirated Corrosion

Element fuel filter

Element air cleaner outer

Element air cleaner inner

Diesel Filter

Air filter – Inner

Air Filter-Outer

fuel pipe

Ignition switch

Batery terminal leads with copper lugs

140 KVA DG Set located at AFCAO Lubricating oil filter with ‘O’ ring

Lubrication by pass filter with rubber washer

Inobirated Corrosion

Element fuel filter

Element air cleaner outer

Element air cleaner inner

Diesel Filter

Air filter – Inner

Air Filter-Outer

Fuel pipe

Ignition switch

Batery terminal leads with copper lugs

125 KVA DG Set located at CSDO Lubricating oil filter with ‘O’ ring

Lubrication by pass filter with rubber washer

Inobirated Corrosion

Element fuel filter

Element air cleaner outer

Element air cleaner inner

Diesel Filter

Air filter – Inner

Air Filter-Outer

fuel pipe

Ignition switch

Batery terminal leads with copper lugs

Supply & Fix in replacement of Auto voltage regulator relay 415V AC complete all specified and directed by engineer- in- charge

Supply & Fix in replacement of under voltage relay 300-400V complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of Electronic timer 240V AC, adjustment time 6-60Sec complete all specified and directed by engineer- in- charge

Supply & Fix in replacement of Engine start relay, 12V DC complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of reverse power relay, 415V AC complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of Earth leakage relay, 240V AC complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of digital multi function meter to read voltage current and power factor including set of CT-1 each complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of push button switch red with element complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of push button switch green with element complete complete all specified and directed by engineer- in- charge

Supply & Fix in replacement of 3 pole power contactor ML-6, 125 A complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of 3 pole power contactor ML-10, 250 A complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement power contractors in built 1 No + INC No auxiliary 3 pole AC 220 Volts type MNX – 12, 30 A complete all specified and directed by engineer- in- charge.

All as per item No. 111 but type MNX 18, 30 A complete all specified and directed by engineer- in- charge.

Supply & Fix in replacement of solenoid switch suitable including all necessary arrangement complete all specified and directed by engineer- in- charge

Supply and fix in replacement of garden light fitting with LED fitting 18 watts complete with difuser,reflector etc including connecting up to base with 1.5 sqmm 3 core wire complete all as specified an d as directed by Engineer-in-Charge.

Supply and fix in replacement of energy saving and enviornmental friendly long life versatile pressure die cast aluminium IP 65 roadway luminaire with high power 70 watt LED , 6000K , with electronic driver, general spread, all accessories pre-wired and electric connection using PVC insulated and sheathed 1100 volts grade cable with copper conductor of size 2.5 sqmm complete with provn of nuts and bolts fixing on walls/poles etc. complete all as specified. Make : Philips / Havells / HPL / CG

Supply and fix in replacement of energy saving and enviornmental friendly long life versatile pressure die cast aluminium IP 65 roadway luminaire with high power 100 watt LED , 6000K , with electronic driver, general spread, all accessories pre-wired and electric connection using PVC insulated and sheathed 1100 volts grade cable with copper conductor of size 2.5 sqmm complete with provn of nuts and bolts fixing on walls/poles etc. complete all as specified.

S&F in replacement of 200 watt LED 6000K energy saving, enviromental friendly, long life, exclusive innovative die- cast aluminium IP 65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces complete all as specified and directed by engineer-in-charge.

M&L for in replacement of servo motor 10 KG torgue suitable for 250 KVA servo voltage stablizer of existng shape and size complete all as specified and as directed by Engineer-in-Charge.

M&L for in replacement of electronic cards including replacement of all worn out parts like IC's, Regulators, Condensors,Triac, Transistors etc suitable for 250 KVA servo voltage stablizer of existng shape and size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of engine oil 20W40 for various DG sets after complete drainig of existing oil of DG set comlete all as specified and directed by Engineer-in-Charge.

Supply and fix ultra modern design smart LED light fitting architectural design 34 watt 2 x 2 recess LED, 6000K luminaire having glare free symmetrical illumination comlete all as specified and directed by Engineer-in-Charge. Make : Cat Part No. SSK-PAB-6060B-3 IN1-36W of Syska or equivalent in Philips / Havells / Crompton

Ashish Sehgal and Co.

blue max associates

J.P. Enterprises

M/S MG GROUP

Amson electronics

Ridhi engineers and builders