Rajbhawan colony me type-6 evam type-5 ke awaso me civil anurakshan ka karya.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18,

Treatment of Soil 'under Existing Floors Using chemical emulsion @ One Litres Per hole, 300 mm apart including drilling 12 mm holes and plugging with cement mortar 1 : 2 (1 cement 2 Coarse sand ) to match the exiting floor: with chlorpyriphos/Lindane E.C. 20% with 1% Concentration. (DAR-2.35.3.1,

Providing wood work in frame of doors, window, clerestory window and other frames, wrought framed and fixed in posotion with hold fast lugs or with dash fasteneres of reqiured dia & lenght (hold fast lugs or dash fastener shall be paid of separately (Second class teak wood, DAR-9.1.1,

Providing And Fixing Float Glass Panes 5.0 mm thick glass panes (Weight not less than 12.50 kg/Sqm), (DAR-9.7.7.2)

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading DSR 9.7.8

Providing and fixing Glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick DAR-9.9.1.1,

Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DAR N0-9.21.2,

Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm DSR 9.55.1

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 300x16 mm DSR- 9.62.1

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 250x10 mm DSR 9.63.1

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 125 mm DSR 9.66.1

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm DSR 9.74.1

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. DAR-9.83,

Providing and fixing brass Curtain Rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter. metre DAR-14.28.2,

Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous china Wash basin Size-630x450 mm with a pair of 15 mm C.P. brass pillar taps. (17.7.1)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. DSR 17.8

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A

Providing and fixing Stainless Steel A lSl-304(18/8) Kitchen Sink as per IS: 13983 with C.l. brackets, and stanless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever require. Kitchen sink without drain board Size-610x510 mm bowl depth 200 mm. (17.10.2.1)

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32mm dia(17.28.2.1).

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31).

Providing and fixing 600x120x5 mm glass Self with edge round off, supported on anodiesd aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete. (17.33).

Providing and fixing TOILET PAPER HOLDER C.P. Brass (17.34.1).

Providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3

Providing and fixing G.I. Union in G.I. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, New work, ( 15 mm nominal bore ) 18.46.1

Providing and fixing G.I. Union in G.I. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, New work, ( 20 mm nominal bore ) 18.46.2

Providing and fixing G.I. Union in G.I. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, New work, ( 25 mm nominal bore ) 18.46.3

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 20 mm nominal bore ) 18.47.2

Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1)

Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS Standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1)

Providing and fixing C.P. Brass Angle Valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore ( 18.53.1)

Providing and fixing C.P. Brass extentsion nipple (Size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53A)

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR NO-17.81

Providing and fixing 40 mm dia chlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.5)

Providing and fixing 20mm dia chlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.2)

Providing and fixing 25 mm dia chlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.3)

Providing and placing on terrace (at all floor levels )polyethlene water storage tank . IS:12701 marked , with cover and suitable locking arrangement and making necessary holes or inlet , outlet and overflow pipes but without fitings and the base support for tank (Dar-18.48)

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any Gl fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra A)will be paid on this account) (DSR14.75A)

Please Enable Macros to View BoQ information