8661 REPAIR AND MAINTENANCE OF FANS, GEYSERS, SOLAR WATER HEATERS, AND CONNECTED ALLIED ITEMS IN AFMC, LOWER COMD HOSPITAL, NURSING CADET MESS, NURSING COLLEGE AND OTHER AREAS UNDER GE (CENTRAL) PUNE

Supply and fix as in repair capacitor/condensor 4 Mfd complete with clamp, connector as per existing type and size complete all as specified and directed.

Supply and fix as in repair cooler pad set of three of existing size and type complete all as specified and directed.

Supply and fix as in repair front show grill as per exisitng size type and make at site complete all as specified and directed.

Supply and fix as in repair PVC pipe 1/2 " with elbow plastic as per exisiting length (set of three) complete all as specified and directed.

Supply and fix as in repair wooden ply of size 6mm thick and sheet size 3’x6’ water proof for desert cooler fixing of desert cooler/window AC complete all as specified and directed.

Supply and fix as in repair blades for cooler motor fan as per existing size and make complete all as specified and directed.

Disconnecting the mains and taking out the existing unserviceable cooler fan motor and supply, fixing and testing new cooler fan motor as exiting capacity single phase 240 volts of existing make including reconneting the electric mains and testing complete all as specified and directed.

Disconnecting the mains and taking out the existing unserviceable cooler water lifting pump submersible and supply, fixing and testing new cooler water lifting pump heavy duty single phase 240 volts of existing make including reconneting the electric mains and testing complete all as specified and directed.

Removal of ceiling/Wall mounted fan after disconnecting the power supply to the fan, taking apart the fan from its mounted position and fix it to other location by adjusting or extending electrical wires ensuring wires are insulated using electrical tape or connectors, ensuring the fan blades are balanced for smooth operation, reconnecting the switch to control the fan complete all as specified and directed.

Disconnecting and taking down and opening the ceiling fan of size 1200/1400 mm sweep carefully dismantling complete for servicing by cleaning the bearing/bush by cleaning solution and replacing the split pin and unserviceable items like bearing, bushes, rubber real, condenser, flexible cable, canopy, etc., assembling ceiling fan and refixing in the original place connection and testing complete all well complete all as specified and directed. Note- Replacement of unserviceable items will be measured and paid under relevant items.

Supply and fixing of ball bearing of existing size for 1200/1400 mm sweep all as per installed shape and size complete all as specified and directed.

Supply and fixing of gun metal bushes of existing size & make for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Supply and fixing of capacitor/condenser 2.5/3 Mfd for ceiling fan/exhaust fan complete with its clamp, connector as per existing type and size complete all as specified and directed.

Supply and fixing of canopy of existing size & make for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

Supply and fix as in repair of ceiling fan clamp assembly complete with nut, bolt, washer, u clamp and rubber reel etc of existing size & suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed.

Supply and fixing of PVC 3 core Cord Flexible copper insulated cable 24/0.2mm size Black/Grey colour complete all as specified and directed.

Disconnecting and taking down the exhaust fan & wall mounted fan/air circulator of size 300/380/450 mm sweep carefully dismantling complete for servicing by cleaning the bearing/bush by cleaning solution and replacing the unserviceable items like bearing, condenser, flexible cable, etc., assembling exhaust fan and refixing in the original place connection and testing complete all as specified and directed. Note:- Replacement of unserviceable items will be measured and paid under relevant items separately.

S&F exhaust fan AC single phase 230 volts for size 300 mm sweep, including fixing arrangement including nut, bolts, washer etc with necessary eletric connection with suitable copper wire from ceiling rose inluding removing and dismantling and given as sch of credit to contractor complete all as specified and directed.

Supply and fixing ball bearing and bush of existing size for exhaust fan/wall mounted fan 300/380/450 mm sweep complete all as specified and directed.

Material and labour for collecting the burnt ceiling fans any type and size including blades from AFMC site and dismantling removing the burnt winding and rewinding of ceiling fan 1200/1400 mm sweep with super enameled copper conductor winding wire of same gauge and weight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and fixing the same and testing at site complete all as specified and directed. Note- Any transportation of unsv fans to civil workshop if required is deemed to be included in the job.

Supply and fix as in repair of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 6 Feet long complete all as specified and directed.

S&F ceiling fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose including removing and dismantling of old unsv fan any type and size and deposited to MES store yard complete all as specified and directed.

Material and labour for collecting the burnt ceiling fans any type and size including blades from AFMC site removing the burnt winding and rewinding of exhaust fan/wall mounted fan of size 280/300mm sweep complete with super enameled copper conduct winding wire of same gauge and weight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and after repairing fixing and testing of ex fan at site complete all as specified and directed. Note- Any transportation of unsv Ex fans to civil workshop if required is deemed to be included in the job.

Material and labour for preparing the faded surfaces of ceiling fan size 1200/1400 mm sweep with soap/soda, painting with DUCO paint of approved tint by one coat of spray painting complete all as specified and directed.

S&F exhaust fan AC single phase 230 volts for size 450 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose including removing and dismantling of old unsv fan any type and size and deposited to MES store yard complete all as specified and directed.

Material and labour for collecting the burnt ceiling fans any type and size including blades from AFMC site and taking out to reputed work shop dismantling removing the burnt winding and rewinding of exhaust fan/wall mounted fan/air circulator of size 450 mm sweep complete with super enameled copper conduct winding wire of same gauge and weight insulating, varnishing, baking, including wornout bearing/bush greasing assembling and transporting the same and fixing and testing at site complete all as specified and directed.

Material and labour for disconnecting from the electric mains and taking down opening and inspection of storage type water heater of size 25ltrs/50 Ltrs capacity and descaling with dilute hydrochloric acid, checking for water tightness of the inner tank, cable continuity, thermostat of setting at 70 degree C checking fusible plug, base assembly, stop cock including replacement of indicator lamp, rubber PVC gasket washers reassembling, refixing and reconnection the electric connections at old place and replacing unserviceable bolts and nuts, cementing work including hydraulic pressure testing with hard operated hydraulic pump complete after repair including spray painting of one coat with DUCO paint of approved in after preparation of surface. Note : (a) Replacement of unserviceable items like heating element, indicator lamps, thermostat, stop cock, PVC Hot and cold pipes will be measured & paid separately under relevant item. (b) Labour charges for replacing the unsv spares, disconnection and reconnection of water and electric connections shall be deemed to be included in unit rate quoted for this items.

Supply and fix as in repair heating element (round/triangular) including rubber washer/PVC gasket of the following size 1.5KW of existing type & make complete all as specified and directed.

Supply and fix as in repair thermostat for geyser of capacity upto 50 ltrs capacity of existing type & make complete all as specified and directed.

Supply & fix electric storage water heater of capacity 25 Ltr, 230 V energy efficient including fast nut, bolt, washer and removing and dismantling of old unsv electric storage water heater any type and size and given as sch of credit to contractor complete all as specified and directed.

Supply and fix as in repair rubber gasket for inner tank of capacity upto 25 Ltrs of existing type & make complete all as specified and directed.

Supply and fix as in repair air release valve for 25/50 Ltrs capacity of existing type & make complete all as specified and directed.

Removing of old leakage geyser tank and supply and fixing of 25 ltr storage water heater tank as per existing shape and type complete all as specified and directed.

Removing of old leakage geyser tank and supply and fixing of 50 ltr storage water heater tank as per existing shape and type complete all as specified and directed.

Supply and fix as in repair safety valve of existing type and complete all as specified and directed.

Supply and fix as in repair CP stop valve 15mm dia of existing type and make complete all as specified and directed.

Supply & fix electric storage water heater of capacity 50 Ltr, 230 V energy efficient including fast nut, bolt, washer and removing and dismantling of old unsv electric storage water heater any type and given as sch of credit to contractor complete all as specified and directed.

Material and labour for disconnecting from mains and dismantling the unserviceable gyeser base assembly (syphon system) and replacing the new base assembly of existing size & make with rubber gasket for 25 Ltrs capacity (6/8 hole) complete all as specified and directed.

Material and labour for disconnecting from mains and dismantling the unserviceable gyeser base assembly (syphon system) and replacing the new base assembly of existing size & make with rubber gasket for 50 Ltrs capacity (6/8 hole) complete all as specified and directed.

Supply and fix as in repair indicator lamps for geyser of capacity 25/50 Ltr existing type complete all as specified and directed.

Supply and fix as in repair PVC connections 15 mm size with PTMT nuts of up to length 600 mm length (for hot and cold water inlet and outlet) complete all as specified and directed.

Supply and and fix as in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/GI pipe 25 mm dia complete all as specified and directed

Supply and fix as in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/GI pipe 20 mm dia complete all as specified and directed

Supply and fix self adhesive printed sticker of vinyal sheet and of size 10 x 3 cm with written letter GE (C) Pune complete all as specified and directed.

Supply and fix as in repair hot water GI pipe duly insulated with glass wool and aluminium cladding 20 mm bore incl connection with solar water heater to tape point and fixing with MS clamp nut bolt etc complete all as specified and directed.

Routine repairing/servicing of solar water heating system tubelor rod collector/flate surface plate type of capacity upto 500 LPD with/without suitable electric backup including its accessories complete cindl checking for any leakage, cleaning and removal of blockages in tubes and replacement of all minor items such as nuts, bolts, washers shall be carried out and will be deemed to be included in the job complete all as specified and directed.

Supply and fix as in repair of solar water heating system tubelor rod collector of capacity 58mm x 1800 Dia evacuted class tubes used in solar water heater all as per existing type and size complete all as specified and directed

Replacement of tubelor rod collector based on direct transfering of heat for 100 to 500 LPD solar water heater (ETC) as per existing shape and size complete all as specified and directed

Supply and fix as in repair repair of washer (exterior/interior type) of solar water heating system as per existing shape and size complete all as specified and directed.

Replacement of thermostat for 100 to 500 LPD solar water heater 2000 watt, 35 to 75 deg C, 230 volt single phase complete all as specified and directed

Supply and fix as in repair of solar water heating element with thermostat 3 KW incl electric connections complete all as specified and directed

Supply and fix as in repair 200 LPD Technoz Spark solar water heater PC Zinc coated tank inner tank sheet 2.5mm, thick and high glass epoxy coating suitable for hard water and borewell water all as per existing make and type including installation, removing the old solar panel, installation, commissioning and testing complete all as specified and directed.

S&F wall fan single phase 230 volts for size 400 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose, including removing and dismantling of old unsv fan any type and size and deposited to MES store yard complete all as specified and directed.

Supply and fix as in repair heating element (round/triangular) including rubber washer/PVC gasket of the following size 2 KW of existing type & make complete all as specified and directed.

Supply and fix as in repair of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 30 cm long complete all as specified and directed.

Supply and fix as in repair of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 60 cm long complete all as specified and directed.

S&F exhaust fan AC single phase 230 volts for size 200 mm sweep plastic body along with louvers, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose, including removing and dismantling of old unsv fan any type and size and deposited to MES store yard complete all as specified and directed.

Material and labour for removing of unsv exhaust fan from any type of frame, removing out of its motors and supply and fixing of new fan motor assembly as per existing type, size and make for 150/200 mm exhaust fan, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as specified and directed.

Material and labour for removing of unsv exhaust fan from any type of frame, removing out of its motors and supply and fixing of new fan motor assembly as per existing type, size and make for 250 mm exhaust fan, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as specified and directed.

Supply and fix as in repair of ceiling fan down rod GI pipe of 15 mm bore, duly arrangement of hole and cutting of pipe etc of size 4 Feet long complete all as specified and directed.

Note for all above :- (a) The contractor shall deploy his/her own technician, assisted by a helper, along with a ladder and all necessary electrical tools, to inspect and assess faults in any of the electrical equipment mentioned above. The contractor shall rectify the faults as and when complaints are raised by the subdivision for various locations. (b) The complaint can be registered telephonic/complaint slip, WhatsApp and any other mode of communication.