SPECIAL REPAIRS TO BLDG NO P-365, PROVN OF ARBORICULTURE AND RAIN WATER HARVESTING AT OTM ACCN FOR OFFRS GE (S) AHMEDNAGAR

Amount

Dismantling of AC sheets (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above gound level) all as specified and as directed.

Demoltion of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. all as specified and as directed.

Taking down old steel windows / ventilators of any size and type complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Excavation over areas not exc 1.5 m depth in any type of soil and getting out all as specified and as directed.

Excavation over areas exc 1.5 m but not exceeding 3.0 m depth in any type of soil and getting out all as specified and as directed.

Excavation over areas exc 3.0 m but not exceeding 4.5 m depth in any type of soil and getting out all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.50 m in depth for foundation etc and not exc 10sqm on plan in any type of soil and getting out complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc 1.50 m but not exc 3.0 m in depth for foundation etc and not exc 10sqm on plan in any type of soil and getting out complete all as specified and directed.

Returning/filling in including watering, levelling, ramming in layers not exc 25cm thick complete all as specified and as directed.

Removing surplus soil to distance not exceeding 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and as directed.

M&L for loose filling with broken stone or boulders of gauge 40 to 80 mm in rain water harvesting pits complete all as specified and as directed.

M&L for Loose filling with broken stone aggregate of gauge 20 to 30 mm in rain water harvesting pits complete all as specified and as directed.

M&L for sand filling with coarse sand/pea size gravel in rain water harvesting pit including spreading and levelling in layers n exc 25 cm thick complete all as specified and as directed.

M&L for moorum filling in floors or paving, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hard core of broken stone, gauge exc 63mm but not exc. 100mm, deposited, spread, levelled and rammed in layers not exc. 15 cm thick, including watering complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation filing and mass concrete complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 as in surface channels and drains including necessary forms amd moulds and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4, Type B-1 (using 20mm graded stone aggregate) as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings,throating etc. and setting in cement mortar 1:4 complete all as specified and as directed.

M&L for reinforced cement concrete M-25 (using 20mm graded stone aggregat) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, old size, built in cement mortar 1:4 as in wall foundation and pointed flush in cement mortar 1:4 as the work proceeds on external face of the wall below ground level complete all as specified and as directed.

Use and waste of formwork to soffits suspended slabs such as roof slabs, floor slabs, landing slabs and similar work not exc 20cm thick for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to sides suspended slabs such as roof slabs, floor slabs, landing slabs and similar work not exc 20cm thick for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for framed work such as grills, grating etc with end of bars shoulderd and/or riveted, welded or forged into spikes, framed guard bars iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F mild steel work as in bands, straps, supports or stays, clamps, hold fasts, rungs, hooks, handles, steps and similar shall articles conforming to Fe-410-0 all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed.

All as per serial item No 29 but 5mm to 10mm dia as in stirrups, spacers and binders

S&F welded steel wire fabric, weight not exc 4 kg/Sqm and fixed to steel members complete all as specified and as directed.

S&F mild steel ventilators, top hung type icluding steel handles and steel peg stay complete with glazing bars dovetailed or welded complete as specified in relevent IS all as specified and as directed.

M&L for welding in repairs, n exc 2.50cm length, thickness of metal to be welded n exc 6mm complete all as specified and as directed

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws as specified colour and design as approved by GE complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and as directed.

M&L for 150mm thick PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for stone flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and side dressed, bedded in cement mortar 1:3, joints 20mm thick, grouted in cement mortar 1:2 with an admixture of mettalic floor hardner 5% by weight of cement and struck flush complete all as pecified and as directed

M&L for edge stones flooring with stone setts of size 250 to 300mm long x 150 to 200mm wide, 450mm deep and side dressed, bedded in cement mortar 1:3, joints 20mm thick, grouted in cement mortar 1:2 with an admixture of mettalic floor hardner 5% by weight of cement and struck flush complete all as pecified and as directed

M&L for 10mm thick rendering on other than fair faces of brick work or concrete surfaces (internal surfaces of walls) in cement mortar 1:6, finished even and smooth without using extra cement all as specified and as directed.

M&L for 15mm thick rendering in two layers on fair faces of brick work or concrete surfaces (external surfaces of walls) first layer of 10mm thick in cement mortar 1:6 and second layer of 5mm in cement mortar in cement mortar 1:4 mixed, finished even and fair all as specified and as directed.

M&L for rendering 15mm thick plaster on fair faces of brick walls in cement mortar 1:4, finish even and smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces (in isolated width or in widths such as bands, skirtings, drip moulds etc not exc 15cm width of walls) in cement mortar 1:4, finished even and fair all as specified and as directed.

S&F GI wire netting 0.90mm dia and 12mm mesh, fixed to walls, ceiling and beams with nails etc including overlaps, cutting and waste including making V groove in cracked portion and filled the groove cement mortar 1:2 complete all as specified and as directed

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash on walls all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed.

M&L for preparation of old plastered surfaces or unplastered decorted surfaces of walls and applying one coat of cement base paint all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer all as specified and as directed.

S&F 3mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane and fixed complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint on over a coat of red oxide primer all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of synthetic enamel paint all as specified and as directed.

Rough dressing of the lawn area, flower beds, planter areas, shrubbery or ground cover areas, including trenching to a depth not exc 15 cms(averaging), breaking clods flooding with water, uprooting weeds from area after 10 to 15 days of its flooding including disposal of uprooted vegetation/ removal of rubbish to a distance exc 500m and not exc 1.5 Km outside the MD land complete all as specified and as directed.

Supply and stacking well decomposed cattle manure at site including royality and carriage upto including all lead & lift complete all as specified and as directed Note :- (a) Cattle manure measured in stacks shall be reduced by 8% for payment. (b) Quantity to be executed for D&MR portion shall also be considered under this item.

Supply and stacking of good earth / locally available fertile soil at site (duly seived and free from pebbles, clogs, stones etc) including royality and carriage upto all lead & lift complete all as specified and as directed Note :- (a) Good earth/sweet soil measured in stacks shall be reduced by 20 % for payment. (b) Qty to be executed for D&MR portion shall also be considered under this item.

All as per serial item No 59 above but for Duranta golden Shrubs/ Roses summmersnow Shrubs / Roses kashmira Shrubs / J Hibiscus single orange Shrubs / Jasminum sambac Shrubs / Myna Erecta Shrubs (Marigold)

All as per serial item No 62 above but for Justicia hedge

All as per serial item No 62 above but for Thuja hedge

Supply, fixing, testing and commissioning irrigation system manually operated with and including ISI marked PVC pipe 40mm bore, sprinkler ball valve including all excavation and earth work complete all as specified and as directed.

Supply only sprinklers including QRC Keys including all fittings and accessories complete all as specified and as directed.

Supply only reinforced PVC hose pipe 40mm dia all as specified and as directed.

Maintenance and supervision of trees, plants, shrubs, climbers, lawn grass etc including watering, pruning, spraying of pesticides, insecticides in the desired periodicity, weeding, watering and replacing the dead plants/ grass with new plants/grass etc and periodical maintenance & painting of trees guards from the certified date of completion of phase-I work. (Trees, plants, shrubs, climber, lawn grass etc, planted / executed under serial item No 54 to 67 shall be maintained for 4 months under this item.) Notes :- (i) The maintainance period of grass shall be 4 months and during maintenane period the rate quoted includes watering, pruning, spraying of pesticides (mythell parathiyon dust 2 % every 25 gram for pit)., fungicides, insecticides, adding fertilisers, removing of weeds and stacking of grass sapling preparation of grass basin. (ii) The contractor shall ensure that he is having tractor tanker, small tanker on rickshaw fitted with hose pipe etc for watering purposes and requisite equipments for spraying medicine on plants, ploughing the earth for weeding out unwanted growth/grass etc in running condition through out the period. (iii) The foliage & other unwanted items shall be removed from the site to a place as directed by GE/Engineer-in-charge.

Material, labour, tools and plants for trail bore holes of size 200mm dia upto 200 mtr depth below ground level in any kind of soil strata including soil/ soft rock/ hard rock etc complete with and including removing the excavated materials all as specified and as directed.

Development of trail bore holes into tube wells in aluvial strata 200 mm dia expanded to 300mm dia complete with MS casing pipes, slotted MS strainers, shouldering including development and testing etc., all as specified and as directed.

S&F MS reducer, MS bail plug, MS well cap clamp, MS plug cap at top MS pipe, centring guides etc., electric logging and simple strata box complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturbed surfaces of wall/floors etc as specified and as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neuatral single core multistranded copper conductor cable of 1100 Volts grade PVC insulated and unsheathed, FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for One light point and one fan point controlled by one, one way swtich.the following:- Make of wire - Finolex/RR cables/Havells/Standard. Notes: (a) Proper colour coding shall be adopted for wiring (for Phase-RED/ YELLOW/ BLUE, for Earth - Green and Neutral - Black) (b) Wiring shall be done as per complaints received from user only on reqired basis and it is not necessary to do whole wiring of any whole bldg. (c) All points shall be earthed up to fixtures i.e holdrs, tube lights, all lights, ceiling lights, bulkhead lights, bldg security lights etc.)

(b) All as per serial item No. 73 here in before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire.

(c) All as per serial item No. 73 here in before but on independent board.

(d) All as per serial item No. 73 here in before but with 2.5 Sqmm PVC copper stranded cable FRLS type for Phase, Neutral and Earth for one 15 Amp 6 pin socket on independent board.

S&F switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & as directed.

S&F socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination multipurpose flush type 2 in 1 type (6 pin ) 5/15 Amps, 230V, all as specified and as directed

S&F ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish all as specified and as directed.

S&F LED Light fitting 1 x 20 Watt, 220 volts AC decorative box type with driver, holder, including LED tube light connecting up with three core of flexible copper conductor cable of suitable size from ceiling rose complete with all as specified & as directed.

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables, 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade PVC insulated unsheathed multistranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals complete including taking down old submain wiring all as specified & as directed. Notes : (a) Proper colour coding shall be adopted for wiring (for Phase - Red / Yellow / Blue, for Earth - Green and Neutral- Black) . (b) Two run of 4 sqmm for one run for phase, one run for neutral with one run of 2.5 sqmm cable for earth and one run of PVC casing & caping shall be measured as one unit.

S&F MCB SP, AC 240 V, 6 to 32 Amps 10 KA capacity,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCB SPN, AC 240 V, 40 Amps 10 KA capacity ,'C' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 4 way protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting with 200 Amps rated copper busbar with neutral bar, earthbar and cable lines for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs security light of building with single piece new generation energy saving and environmental friendly long life LED 30W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP 66 protection and impact resistance of IK07 including one bracket made of light grade GI pipe 25 mm dia, 1.5 m long ad fixed to wall/ pole with two clams made out of MS FI 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminium cable all as directed and as specified.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

PRADIPKUMAR POPATRAO THUBE

ASHUTOSH BUILDERS