Construction of Prajasoudha Shahabad Taluk Adalitha Kendra at Shahabad Taluk, Kalburgi district

Construction of Prajasoudha Shahabad Taluk Adalitha Kendra at Shahabad Taluk, Kalburgi district

CIVIL WORKS - Earth work in surface excavation by mechanical means for lowering & levelling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

FLAGGING CONCRETE - Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a ...

Supplying, fitting and placing TMT FE550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding join...

Supplying, fitting and placing TMT FE550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding join...

Supplying, fitting and placing TMT FE550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding join...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing and laying autoclaved aerated cement blocks masonry with 200 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill lev...

Providing and laying autoclaved aerated cement blocks masonry with 200 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill lev...

Providing and laying autoclaved aerated cement blocks masonry with 200 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill lev...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing Salwood frames for doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing Salwood frames for doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing Salwood frames for doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round ...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dado, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with while cement slurry over rough plaster surface (excluding cost of rough pl...

Providing skirting, dado, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with while cement slurry over rough plaster surface (excluding cost of rough pl...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing 15 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing 15 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mmx10mmx2mm braced with iron flat iron diagonals 20mmx5mm size, with top and bottom rails...

Providing & fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansi...

Weathering course to roofs using Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. First Floor

Weathering course to roofs using Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. Second floor

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per specificati...

Providing and fixing plaster mesh 200mm wide manufactured out of hot dipped galvanized iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for se...

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 150mm.

Providing and fixing chromium plated brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with ex...

WATER SUPPLY - Earth work excavation for pipelines/cables by mechanical means upto 600mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricadi...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing GM (copper alloy) wheel valves/ check valve confirming to IS 778/1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle scr...

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with stan...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete.

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comple...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

UGD - Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded met...

SUMP TANK - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS ...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) fnished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smoo...

Providing and fxing MS ladder between landings, 45 cms wide using angle iron of specifed sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, i...

Providing and fxing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includin...

COMPOUND WALL - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifcations, including setting out, shoring, strutting, barricad...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifcations, including setting out, shoring, strutting, barricading, caution lig...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS ...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS Codes machine mixed...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Providing Thermo-Mechanically Treated bars of grade Fe-500 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster of mix :1:4 (1 cement: 4 fne sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Finishing walls with water proofng cement paint of required shade:Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 litrs/10 m² complete including cost of Primi...

BOREWELL - Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopti...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore, plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, ...

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

Providing, supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confrming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifcations,as per nec...

Providing and fxing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensio...

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

Supply and delivery at site wrought middle steel (galvanized) GI union confrming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Union.

Providing and construction of platform in CC 1:2:4 proportion using hard granite or basalt or trap jelly of 20mm and down size for India MarkII hand pump as per approved drawing enclosed to the S.R (U...

Supplying of Thermosetting Plastic i.e., Fiber Glass reinforced polyster sheet moulding compound(SMC) pump house with SMC door & canopy etc..., component as directed by the departmental offers.

Supply and delivery at site of brand new best make pressure gauge bourdon type of size 63mm as per IS 778/1984 with ISI Mark and as per its latest amendments.

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x10 ...

Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. 32Amps

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrifcation and commissioning of the same at th...

BOREWELL TO SUMP - Earth work excavation for pipelines/cables by mechanical means upto 600mm trench width, as per drawing and technical specifcations, including setting out, shoring, strutting, barric...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Providing and fxing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore.

BOREWELL ELECTRICAL - Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confrming to ISI standards and its latest amendments. 5 HP, size 80x65 Head 23.50M,...

Supplying of LT UG cable having aluminum conductor PVC insulated, sheathed,galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class. I Class 'A' PVC Cable. 4 core 10 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 10 sqmm

Supplying and fixing of heavy duty cable glands suitable or UG cable 1.1KV class (metal only) 25mm dia

Supplying……amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ERP/DMC insulator which...

Supplying and fixing Moulded Case Circuit breakers (MCCB) over the existing wood/panel board using necessary screws,bolts,nuts and wiring complete. Protection of Overload and short circuit with therma...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 40-A TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 6-32Amps DP

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying push button operated direct online starter with an anti weld silver cadmium oxide conductor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorro...

Supplying, fixing and wiring 3 phase Digital Ammmeter/Voltmeter

Supplying, fixing and wiring electronic 10 to 40Amps three phase 4 wire class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230v A.C.50Hz 12/24v D.C.

Supplying & fixing of Caution / Danger name board as per drawing

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 15mm alround the cable.

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.

Gun metal non return valve 50mm nominal bore vertical type

Gun metal non return valve 65mm nominal bore vertical type

FIRE & CCTV - Supply and installation of 2kg Fire Extinguisher Mono Ammonium Phosphate Powder50, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6Kg, empty weight 1.6Kg, Can Height 344MM, Diamet...

Supplying of four bucket stand along with buckets. Complete

Supplying of FIRST AID CHART with lamination. Complete

Supplying and installation of RUBBERMAT 1mtrx1mtr-1Omm thick.complete including cost of materials,labour,usage charges of machinery complete as per specifications.

Smart Surveillance System (CCTV): using PTZ & Fixed cameras, OFC monitoring system, HMI etc., as per specification CODE 8525 34.

FURNITURE - Providing and fabricating cabin table with 19mm ply finished with 4mm thk approved veneer melamine finished. table top: 40mm thick table top to be formed out 2 Layers of 19mm thk ply and t...

CABIN TABLES - TYPE-1:Table Dimension: (1800x 900 x 750mm) + (1350mm x 800mm x 750mm) L shaped : Providing and Fabricating Cabin Table with 19mm ply Finished with 4mm thk Approved Veneer Melamine fin...

Conference table : providing and fixing of conference table with 8 seater of size ( 1200mm x 3000mm x 750mm). Consisting of 25mm thick PLPB table top edge bounded, 18mm thick PLPB with edge bounded mo...

Executive chair: supplying and placing in position high back chair with following specification. Seat: seat to be formed out of bent ply/pvc backing with deformable pre moulded foam upholstered with a...

Supplying and placing in position high back chair with following specification. Seat: deat to be formed out of bent ply/pvc backing with deformable pre moulded foam upholstered with approved fabric. B...

MEDIUM BACK CHAIR-FABRIC WITH CASTORS, supply and placing in posistion medium back chairs with following specifications. Seat: seat to be formed out bent ply/pvc backing with deofrmable pre moluded fo...

MEDIUM BACK CHAIR-FABRIC WITH CASTORS, supply and placing in posistion medium back chairs with following specifications. Seat: seat to be formed out bent ply/pvc backing with deofrmable pre moluded fo...

Manufacturing, supplying and fixing wooden wardrobe of 0.6m deep using 19mm thick vinyl bonded water proof black board, shutters all round ward robe, lockable drawers with sliding channels, cupboard d...

Tahashildar chamber back storage ( 6600mmx600mmx1000mm) same as wooden wardrobe material specification ( MR- rate excluding GST)

Side table: supply, installation and fixing of cabinets made up of waterproof ply, 600mm deep with 1mm thick internal laminate and shutters finished with 1mm thick external laminate as per the designe...

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferabl...

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in char...

Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge...

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in cha...

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...

DRAINS & CULVERTS - Earthwork excavation for foundation of buildings, 1.5m and above in width, in Hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, s...

Earthwork excavation for foundation (in deposited soil) and filling sides of foundation upto plinth in layers not exceeding 20 cms in depth, compacting each deposited layers by ramming after watering ...

Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.84cum and fine aggregates @ 0.56cum mac...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Supplying, fitting and placing TMT FE550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding join...

RAINWATER HARVESTING - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

STP - Waste Water Treatment by Prefabricated anaerobic Bio Septic tank : (For 100 Souls/10KLD)

Providing, installation and commissioning of an anaerobic Bio Septic tank with all necessary accessories ...

NON-SR ITEMS - Providing supplying and fixing Hydraulic door closures with mounting heavy duty shuitable for flush door shutters including cost of materials,labour etc., complete as per specifications...

Supplying, installing, testing and commissioning approved make15 mm CP health faucet of approved make with necessary CP flexible hose 1.0m long nozzle, CP crutch,nozzle anguler stop cock with wall fla...

MOULDING : Providing 200 mm height architectural moulding with three stepswith 50mm on top and bottom and 100 mm middle champhered steps in standard architectural methods of execution running on thr...

Providing Teak wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing and fixing in position fully panelled Teak wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing ...

Providing and fixing MS door of Godrej make for strong room door class 1 with BIS labelled +CG with vemtilator ( TRTL 15X6, FR30) (Excluding frame; 1060mmx2045mm, including frame 1200mmx2100mm

PARKING STAND - Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal o...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work.

Providing and fixing ion wall face unplasticised Rigid PVC rain water pipes confirming to IS :13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for thermal expansio...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

Gutter (600 mm over all girth)

Ridges plain (500 - 600mm)

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

LIFT - 6 PASSANGER - Design,supplying,erecting testing and commissioning of-Passenger /Bed -cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

INTERNAL ELECTRIFICATION - PVC CONDUITS AND ACCESSORIES - SUB MAIN CIRCUIT / CIRCUIT MAINS

Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low co...

b) 3/0.036 (3/20) mm (2.5 Sqmm Copper wire)

c) 7/0.036 (7/20) (4 Sqmm copper wire)

d)7/0.048 (7/18) mm (6 Sqmm Copper wire)

Open Conduit System

Supplying heavy gauge PVC conduit pipe …….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case ...

b)25 mm dia 2mm thick.

c) 32 mm dia 2.5 mm thick.

Concealed Conduit System

Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before...

b)25 mm dia 2 mm thick

c)32 mm dia 2.5 mm thick

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete ( 3/1.7)

(a)up to 50mm conduit in bri...

Supplying and fixing PVC/Metal conduit accessories.(3/5)

(a) 19/20mm deep junction box

Supplying and fixing PVC/Metal conduit accessories.(3/5)

(b) 25mm deep junction box

Supplying and fixing PVC/Metal conduit accessories.(3/5)

(b) 32mm deep junction box

Supplyind and Fixing Metal Fan Box with Round Hook.(11/32)

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire withou...

b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box

c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box

d) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches

e) Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches box

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.. Is 3854 and IS 1293. (16/3.7)

(a) 6 Amp one way

b) 6 Amp two way

c) 6 Amps 3 way socket.

d) Stepped fan regulators

e) 6 Amp bell push

f) 6/16 A universal switch & socket

g) Telephone Socket

h) RJ45 / I.O.outlet

i) 16 Amp one way

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (7/16)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

e) 10-12 Moudule

Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall b mounted in a themoplastic/powder coate...

Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB ). The entire plug and socket shall b mounted in a themoplastic/powder coate...

A. L.T.SWITCHGEAR AND DISTRUBUTION BOARDS - L.T.PANEL, SMSB-1, 2, EX LTG PANEL AND DISTRIBUTION BOARDS. - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting...

Supplying of on load change over over switches 4 poles, AC 23Amps duty 415V, 50HZ, AC Supply. 400Amps 4P COS

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...

125-Amps 25kA.TP

160Amps 25kA.TP

100Amps 25kA TP

Supplying and fixing of Shunt trip suitable for MCCB.CBCT.(P-36/10)

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest micro controller based,digital readout of percentage leakage curre...

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.(P-48/6.27)

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network wi...

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer.class 0.5 accurecy with Tape Wound.(P-40/30)

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.Group 'A' (P-40/34)

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

100Amps 4x30x6mm Alluminium Strips

250Amps 4x30x10mm Alluminium Strips

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 75...

ACCP PANEL (50 KVAR) - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hing...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...

Supplying and fixing of Shunt trip suitable for MCCB.CBCT.(P-36/10)

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.(P-48/6.27)

Supplying, fixingandwiring50/5 to400/5A5VAburdenCurrent Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.Group 'A' (P-40/34)

Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor

a) up to 5 KVAR

b) 6 to 10 KVAR

b) 11 to 20 KVAR

Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and ...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

MCB Distribution Board

Supplying and fixing regular MCB Distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts with provision for fixing suitable type capacity MC...

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board.(Residual current circuit board))(RCCB)

a) 16-25 Amps 2 pole...

b) 32-40 Amps 2 pole (2 Module type)

c) 25-40 Amps 4 pole

Supplying and fixing of MINIATURE CIRCUIT BREAKERS in existing distribution boards using necessary fixng materials and "C" type Curve, Indicator ON/OFF, energy cross-3 with short circuit breaking cap...

Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strip (except 2Cx 10Sq.mm wire armoured ) Confirming to IS-3975:1990 ( N...

3 1/2 C - 50 Sq.mm A2XFY

3 1/2 C - 35 Sq.mm A2XFY

3 1/2 C - 25 Sq.mm A2XFY

4 C - 16 Sq.mm A2XFY

4 C - 10 Sq.mm A2XFY

END TERMINATION

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (69/7.14)

Supplying tinned copper lugs and crimping and wiring to terminal point fo...

LAYING CHARGES FOR CABLES

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench/duct. (68/7.8)

25 sqmm to 75 sqmm

PERFORATED TYPE CABLE TRAY

Suplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.( ...

SUPPLY OF LIGHT FIXTURES.

Supplying CFL mirror light fitting with 2x11W CFL lamp, choke, Perspex cover and completely wired for use on 230V 50Hz AC (25/4.25)

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ ...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ ...

Supplying of recessed/surface mount aesthetic Square / rectangular modular luminary made out of single piece powder coated CRCA sheet steel accommodating all electrical accessories like elecronic ball...

Supplying of recessed/surface mount aesthetic Square / rectangular modular luminary made out of single piece powder coated CRCA sheet steel accommodating all electrical accessories like elecronic ball...

SupplyingandfixingofLEDBulkheadof10WwithIP65protection and IK08 impact resistance suitable for surfaceandwallmounting applications.

Supply of LED Streetlight luminaire with pressure diecast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising ofanti glare clear diffuser with Injectio nmoulded polycarb...

Fabricating, supplying and errecting swaged tubular pole of height …Mtr having three sections, and providing two coats of redoxide paint and finished with two coats of enamelled paint of approved qu...

Supplying and fixing of solar lux level street light control switch single phase including suitable capacity contactor. 3kv

Supplying of Ceiling Fan with Capacitor ratingAsper guidelineof BEE5star ratingandIS:374/19andalsocomplywithIS:1709/1984 withlatestamend ment,Ratedvoltage220V/50Hz,Ratedpowerupto 35W+/-10%,Ratedcurren...

SUPPLY OF EXHAUST FAN

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50HZ, AC Supply complete.(84/9.2)

(a) 12" sweep (300mm)

FIXING OF EXHAUST FAN

Fixing on e exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. Ceiling rose wisth sufficient length of 23/0.0076 inch PVC insulated twincore wire....

FIXING OF CEILING FAN

Extra length of GI pipe of class B 19mm dia for down rod. (109 / 17.10)

SUPPLY OF WALL FAN

Supplying wall mounting fan suitable to operate at single-phase 230 V A.C. supply,(84/9.4)

NETWORKING AND TELECOMMUNICATION

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable..

Two Pair (Tag block to outlet).

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable..

Supply and fixing 20 pair telephone tag block "Krone make".

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-oxial TV cable. RG-6.

Supplying and drawing UTP-CAT 6E LAN cable.

Supplying & Fixing of switch mounting rack with power manager & Cable manager . .

18U with 650mm depth

Supplying & Fixing of switch mounting rack with power manager & Cable manager . .(85 / 11.4)

Supplying & Fixing of Power strip

Supplying & Fixing of switch mounting rack with power manager & Cable manager . .

Supplying of shelf

Supplying & Fixing of switch mounting rack with power manager & Cable manager . .

Supplying & fixing of Castor wheels to the Shelf. (set of 4)

Supplying & Fixing of switch mounting rack with power manager & Cable manager . .

Supplying fixing of Network Switches.

24 port 10/100/1000 Switch

Supplying & fixing of I/O socket eith back box

Supplying & fixing of I/O socket eith back box

Supplying & Fixing of …mtrs Cat6 Patch Cable

Supplying & Fixing of Patch panel for Lan cabling

24 Port 10/100 patch panel

UPS & ACCESSORIES

Supplying, erection, testing and commissioning of Off-Line UPS system suitable for operation on 230 V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wir...

Supplying, installation, testing & commissioning of 12 Volts DC, AH Batteries in poly propylene container for U.P.S. Low maintenance Tubular batteries

a) 6 x 12 V, 150 AH capacity Acid Ba...

EXTERNAL ELECTRIFICATION - Providing 2 pole structure at the tapping point. (2 nos) - Material cost - RCC D.P structure using 9 mtrs RCC Pole with WL 145 kg

45 kN Disc Insulators

Guy Set Complete

Spiral Earth Electrodes

Concrete for Guy set (without cement)

Caution / Danger Board

Anti - Climbing Device (12mtrs / 1 kg G.I. Barbed Wire) Lumpsum

11 kV 400 A D/B GOS

H-Frame for mounting GOS

Concreting of 9Mts RCC Poles - Base Concreting in CC 1:4:8 500x650x150mm

Pole Concreting in CC 1:2:4 650x500x1700mm

Coping in CC 1:2:4 and as per actuals

Earthing of DP set with GI Pipe

Lighting arestors metal oxide 9 Kv, 5Kv

Painting of 9Mts RCC Poles

Labour cost - RCC D.P structure using 9 mtrs RCC Pole with WL 145 kg

Guy Set Complete

Spiral Earth Electrodes

Caution / Danger Board

Anti - Climbing Device (12mtrs / 1 kg G.I. Barbed Wire) Lumpsum

11 kV 400 A D/B GOS

H-Frame for mounting GOS

Earthing of DP set with GI Pipe

Lighting arestors metal oxide 9 Kv, 5Kv

Extension of 11 KV line from the existing sub station / Feeder (1 KM) - Material cost - 9.0M Long, RCC Pole 145 kg WL (for Deadend, Anchor points.

11kv Horizontal cross arms with HT st supports bolt, nut and washers

45 Kn Disc Insulators

11 KV Pin Insulators with GI Pins

Rabbit ACSR Conductor

PG Clamp for rabbit to rabbit conductor

Concreting Materials for guy sets

Spiral earth electrode

Concereting of 9Mts RCC Poles - Base Concreting in CC 1:4:8 500x650x150mm

Pole Concerecting in CC 1:2:4 500x650x1700mm

Coping in CC 1:2:4 and asper actuals

Caution / Danger Board

Anti - Climbing Device (10mtrs / 1 kg G.I. Barbed Wire) Lumpsum

Transportation of robit ACSCR Conductor and all other materials at 2% on material cost

Labour Cost - 9.0M Long, RCC Pole 145 kg WL (for Deadend, Anchor points.

11kv Horizontal cross arms with HT st supports bolt, nut and washers

Rabbit ACSR Conductor

Spiral earth electrode

Caution / Danger Board

Anti - Climbing Device (10mtrs / 1 kg G.I. Barbed Wire) Lumpsum

Loading & unloading of poles

Erection of HT Metering Cubical - Material cost - 11KV HT Metering Panel 3CTS, 3PTS for 3poles 4 wires metering with transparent cover TTB with 3x8 mm Copper busbar (HT metering box fabricated out of ...

Load break switch for HT metering cubicle

0.2 S class ETV meter with ABT teature and DLMS protocall with TOD foar above

Earthing HT Metering cubicle with GI pipe

Construction of plot form exevation of 1.5x1.5x 1 mtr pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 1cm thick layers well compacted curing etc., complete providi...

Labour cost - 11KV HT Metering Panel 3CTS, 3PTS for 3poles 4 wires metering with transparent cover TTB with 3x8 mm Copper busbar (HT metering box fabricated out of 3mm MS sheet dule epoxy powder coate...

Load break switch for HT metering cubicle

0.2 S class ETV meter with ABT teature and DLMS protocall with TOD foar above

Earthing HT Metering cubicle with GI pipe

TRANSFORMER - 9 mts RCC DP transformer structure using 9 mts RCC poles

11 KV, 5 KN polymetric Pinindulators (24 mm dia FRP rod)

11KV -45 KN polymetric insulators

Guyset complete with 15 strain insulator and concreting materials.

11 KV/433V , 100 KVA,3 phase ,50cycles Distrubtion transformer BEE-5 star rated with oil

Earthing materials pipe type for grounding

caution/Danger boards

Anticlimbing devices with barbed wire

Concreting materials for guyset without cement.

Guy wire 7/10 SWG

11 KV Lightning arrestors metal oxide 9kv , 5KA

LT Distribution Box for 100KVA with MCCB

LT matering Box with CTS an necessary wiring for housing ETV meter

LT electronic tri-victor meter 5A class-0.5 (1.0 accuracy)

11 KV soli core type HG tuse unit (set/3 Nos)

11 KV 200 Amps single Break GOS

concreting materials for mts RCC poles of DP set a) Base concreting 1:4:8 500x650 x150 mm

Pole concreting 1:2:4,650 x 500 x1700 mm

Coping in CC 1:2:4 and as per actuals 150mm alround the pole for an height of 300mm

Painting of 9 Mts RCC DP structure poles

Erection of 9mts RCC DP transformer Structure

Fixing of guyset

Erection of 100 KVA Distribution transformer

Fixing earthings

Fixing of cauton/danger board

Providing Anticlimbing devices

Providing of lightning arrestors

Fixing of LT Distribution Box

Fixing of LT Wiring kit

Fixing of LT matering Box

Fixing of LT electronic tri-vector meter

Fixing of 11 KV Soli core type HG fuse unit

Fixing of 200 amps/S/B GOS

HT CABLE 11 KV 3 core 95 sq.mm XLPE UG Cable - Material Cost

11 kV Class 3X 95 Sq.mm XLPE UG Cable

Cable termination kit Out door HS Type Suitable for 95 Sq.mm

Cable termination kit In door HS Type Suitable for 95 Sq.mm

Cable covering tiles 250X125X40 mm or 125x125x40 mm

RCC Hume pipe, 2000 mm long, 150 mm dia

Collars for RCC Hume pipe

GI Pipe, 150 mm dia for drain crossing, cable raising etc.,

Route and joint indicating stones

Labour charges - Cable trench excavation, 1025x0.6x1=600, Ordinary soil

b) Laying of cable in trench

c) Refilling and consolidation

d) Making of cable terminations

f) Covering the cable with tiles

g) Spreading Sand and forming with Sand round the cable

h) Laying of RCC Hume pipes

i) Laying of GI Pipe

j) Laying of Route and Joint indicating stones

Regular Labour Charges

Chain link fencing - Providing chain link fencing 50mm size o f 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and...

DIESEL GENERATOR SET

Supplying, erection, testing and commissioning of… KVA Diesel Generating Set on existing CC platform Comprising of Diesel Engine Developing ….BHP @ 1500RPM confirming to BS 55...

AMF PanelSupply, Erection, testing, and commissioning of AMF panel suitabe for…KVA DG set. The panel is of cubical type base/floor mounting control panel wisth hinged door, undrilled bottom gland p...