Construction of 01 No. F Type Qtr at Badasingaria PHC in the District of Mayurbhanj.

CIVIL Work

Earth work excavation for foundations in hard soil with initial lead and lift including levelling and dressing with all labour T & P articles, safety measures, incidentals, necessary required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Filling foundation and plinth with sand well watered and rammed including cost, conveyance of materials, labour T&P, royalty etc.complete as per direction of the Engineer-in-charge.

C.C.(1:3:6) in foundation and plinth with 4 cm size hand broken hard granite metal of approved quality from approved quarry including hoisting, lowering and laying in position in layers not exceeding 15cm thick with proper compacting the concrete by means of vibrator to proper slope and level including curing, dewatering shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty and taxes of all materials required for the work as per specification and direction of the Engineer-in-charge.

R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.

column base

Grade beam/Plinth band

Column & wall beam

shelves

Lintel

Roof slab

Stair case

Chajja

Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.

HYSD(Ground FLOOR)

Flyash.brick masonary in C.M.(1:6) in Foundation and Plinth with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

In Foundation & Plinth

Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

Brick Work in Superstructure

Brickwork with fly ash bricks in cement mortar (1:4) in super structure with cost carriage of all materials etc.wall (5")

16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

16mm thick C.P(Ground floor)

12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

12mm thick C.P(Ground floor)

6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

6mm thick C.P(Ground floor)

Supplying fitting and fixing vetrified tile in floors of size 600mmx600mm of approved make with appliction of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, labour T&P etc.required for the work.

Vetrified tiles(Ground floor)

Fixing vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster(1:3) jointed with neat cement slury mixed with pigments to match the shade of tiles/marbles including rubbing and polishing etc. comp.

vertified tiles in dados(Ground floor)

Supplying, fitting and fixing Anti-Skid industrials tile in floors, treads of steps and landing on 25 mm thick cement mortar(1:1 (1 cement : 1 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required

Industrial tiles in floors(Ground floor)

Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc complete as per direction of the Engineer-in-charge.

Granaite tile(Ground floor)

Supplying, fitting and fixing MS Door & window shutter including cost of all materials etc.complete as per direction of the Engineer-in-charge.

Painting one coats of primer on the iron work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

Painting two coats on the steel work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

Finishing wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials, labour and T&P etc.complete as per direction of the Engineer-in-charge.

Acrylic wall putty(Ground floor)

Priming one coat with wall primer bond cement primer including cost, conveyance and taxes of materials with all labour and T&P etc.complete as per direction of the Engineer-in-charge.

Finishing walls with plastic emulsion paints with any approved shade of paints and labour etc. complete.

Plastic emulsion paint(Ground floor)

Finishing wall surface with two coats of weather coat over a coat of primer including cost, conveyance and taxes of materials with all labour and T&P etc.complete as per direction of the Engineer-in-charge.

Weather coat (Ground floor)

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 30mm x32mmx2mm @ 0.90mtr C/C and stainless steel square pipe bracing of size 32mmx32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing with cost conveyance royalties and taxes of all materials and labour etc.complete

25mm thick cc 1:2:2 with 6mm size cb chips for grading concrete over roof slab etc. complete as per direction of the engineer in charge

Head Room

R.C.C.M-20 with 20mm and down graded size h.g. chips of approved quality from approved quarry including hoisting, laying concrete to required thickness with cost, conveyance of materials labour T&P required for the work including shuttering, shuttering watering curing and royalty etc.complete as per specification and direction of the Engineer-in-charge.

Column& wall beam

Roof slab

Chajja

shelves

Supplying, fitting and palcing uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost of all materials, labour T&P etc. complete as per direction of the Engineer-in-charge.

Flyash.brick masonary in C.M.(1:6) in Super Structure with flyash brick of approved quality and size including splays cutting, circular moulding with cost, conveyance of materials including royalty, watering,curing etc.complete.

Head Room(2nd floor)

16mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Head Room(2nd floor)

12mm thick C.P. in C.M.(1:6) over brick work finished smooth after racking out joints with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

12mm thick C.P(1st floor)

6mm thick C.P. in C.M.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Head Room(2nd floor)

Painting two coats over a one coat of primer work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

1st Floor

Finishing wall surfce with acrylic wall putty (water based) of approved make a finished smooth and even surface to receive painting including cost of all materials taxes labour T&P etc complete.

1st Floor

Priming one coat with wall primer bond cement primer including cost, conveyance and taxes of materials with all labour and T&P etc.complete as per direction of the Engineer-in-charge.

Finishing walls withone coat primer & two coat plastic emulsion paints with any approved shade of paints and labour etc. complete.

1st Floor

Weather seal coat two coats with one coat primer and approved hade with cost of weather seal coat and labour etc. complete

1st Floor

Painting one coats of primer on the iron work including cost, conveyance of materials labour, T&P etc.complete as per direction of the Engineer-in-charge.

Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Ref.-DSR-Page-549, Item-9.147D.3)

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100)

Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN. complete as per direction of the Engineer-in-charge.

25mm thick cc 1:2:2 with 6mm size cb chips for grading concrete over roof slab etc. complete as per direction of the engineer in charge

Providing fixing and fitting of 110mm dia P.V.C. rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps etc.complete fixed to wall with nail etc as per the direction of EIC including cost of all material with taxes labour T&P etc complete.