Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance A 17 1ST FLOOR TRIBENI COMMERCIAL COMPLEX G S ROAD ULUBARI KAMRUP ASSAM 781007 | KAMRUP METRO | ASSAM | 781007 | Admitted-Finance |
Tender Value
₹19.2 L
EMD Value
₹38,354
Closing Date
29 Nov 2023, 11:00 amClosed
DEPUTY REGISTRAR
ASSAM UNIVERSITY DIPHU CAMPUS
SITC of 02 nos 16 meter High Mast System with 09 nos symmetrical 200 watt LED Flood lights at AUDC.
2023_AUS_782203_1
AUDC/Engg-Elect-1/23/2016-17
Open Tender
Electrical Works
Works
30 days
ASSAM UNIVERSITY DIPHU CAMPUS
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
Assam University Diphu Campus
₹38,354
1 Dec 2023
22 Nov 2023
30 Nov 2023
22 Nov 2023
29 Nov 2023
22 Nov 2023
Amount
Supplying, erection, testing and commissioning of 16 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral LED flood light luminaries with provision for 9 nos 200 W LED lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ Philips make) provision for twin dome LED aviation obstruction lights (AOL) , control feeder panel housing 63 A TPN MCB incomer, ATS automatic timer switch based on TOD event and geographical data with contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections-plate thickness-Top 3mm, Bottom 4mm,Cross Section of mast: 20 sided polygon, section length: top 8000 mm-bottom 8000 mm, bottom(A/F)410-450 mm,Top(A/F) 150-160 mm, diameter of base plate:540 mm, thickness of base plate: 25 mm, foundation bolts no:8 nos, PCD of foundation bolts:460 mm diameter:M30, length of foundation bolts:850 mm, hot dip galvanised and suitable for wind velocity (50m/s) as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch,
Galvanised Lantern carriage arrangement suitable for 9 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(Bajaj/ Crompton/ Wipro/ Philips make) Supply of foundation bolts M:30/850 mmmanufactured from special steel along with nuts, washers, anchor plates and templates. Supply of 9 nos. 200w LED flood light made up of pressure die cast aluminium housing with toughened glass and high Power LEDs, 120 Lumen/watt, silicon potted gel driver with BIS approve, IP66,secondary lense and protection system 10kv spd included.model:TFS-507-200-57-60D-SL-GL-NSG, Make-Crompton, Philips, L&T non-integral LED flood light luminaries with its control gear boxes. Supply of twin LED dome aviation obstruction lights. Supply of control panel housing 63 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor.
Construction of suitable shallow foundation with design concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour. Erection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour. SITC GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt.)to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require) . Erection of the above panel on suitable foundation including all materials and labour as directed by the department complete.
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
3 & 1/2 Core A2XFY,25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt.25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens,L&T make) 100A incommer MCCB with sheet steel enclosure complete.
Amit Swami
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .