Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.8 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹50.3 L+₹28,240.85 (0.56%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹51.7 L+₹1.7 L (3.35%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹52.3 L+₹2.3 L (4.62%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹52.4 L+₹2.4 L (4.76%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹48.2 L
EMD Value
₹96,400
Closing Date
21 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
SPL REPAIR TO BLDG NO FWH 01 FAMILY WING AT 181 MH ALONGWITH PROVN OF ONE ROOM NEAR OFFRS MESS OF HQ 5 MTN ARTY BDE CAMP AND 3 X 50 LTR GEYSERS FOR OFFICER MESS SINGLE OFFICER ACCN OF AGE B/R I AND AGE E/M UNDER GE 859 EWS
2022_MES_566304_1
8371/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹96,400
Yes
26 Apr 2023
30 Nov 2022
22 Dec 2022
30 Nov 2022
21 Dec 2022
14 Dec 2022
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.
M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.
M&L for MS TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
M&L for MS TMT bars 06 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars etc complete.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .
M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.
Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 1mm thick wall care putty all as specified including preperation of surfaces
S & F rolled section as in main and cross beam, hip and jack rafters, purlins where coneected to common rafter and running rails and guides for sliding doors; fixed with agnle cleats or other connecting plates etc confirming to Fe.410-W(Gde-E-250).
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
S&F Pre-Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
M&L for Mild steel sheet eaves gutters 125 mm dia and 1mm thick, galvanised class 3, half round with rounded edges as all completed and specified
Returning/filling in including spreading, levelling, watering and well remming in hard/dense soil.
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
M & L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded aggregate) as in sub base, including form work complete as as specified and directed by Engineer-in-Charge
M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles .
M&L vitified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.
S & F for anodixed aluminum snap grid of size 605 x 605 mm frame work for false celling with aluminum anodized section size, wall angle 40mm x 25mm x 2mm thick, main /crosstee-section 36.5mm x 25mm x 1.4mm and 23.5mm x 26.4mm x 1.4mm and suspended with 6mm dia GI wire respectively with and including 8mm thick liminated laminated Gypsum board fixd to aluminum snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer's instructions complete all as specified and as directed by Engineer -in-charge make: (i) Aluminum section : VALCO, HINDALCO, JINDAL (ii) Gypsum board :- GYPSUM INDIA Ltd/LA Gyp Eco board, Armstrong, SaintGobain.
S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.
M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebated including joining cleat for fixing etc complete all as specified and directed.
M&L for anodised aluminium door shutters, aluminium section weighing 0.85 Kg/m including necessary joining cleats, galzing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws (top, bottom & lock rails) etc complete all as specified and directed.
M&L for prelaminated particle board 9mm, exteror grade, prelaminated both side with decorative choice lamination as specified and directed.
S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.
M&L anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazig clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (02 no) suitable handle (1 no) complete all as specified.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty completed all as specified and directed by Engr-in-Charge.
Demolition of cement concrete in roofs, floors, beams, staircases, landing and similar works (other than ground floor) etc complete.
M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof pad, floorings, including finishing the surface .
M&L for 10 mm thick screed bed in CM 1:4 for laying on roof surfaces finished even and smooth without using extra cement using WPC @3% by weigh of cement .(WPC will be measured and paid separately)
Supply only integral water proofing compound.
M&L for preparation of new plastered surfaces of roof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed.”
Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.
Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint on walls etc complete all as specified and directed.
M&L for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of distempered oil emulsion over 3mm thick wall care putty on wall all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc complete.
Demolition of RCC of any description and in any position not otherwise specifically provided for.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in chajjas etc complete.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement all as specified and directed.
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles all as specified and directed.
M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).
M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .
M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.
S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.
S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed
S & F 150mm size extruded aluminium alloy handles, fabricated type anodised
S & F 100mm size extruded aluminium alloy handles, fabricated type anodised
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece
Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.
S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.
S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed”
Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.
Supply and fix for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
Supply and fix for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed.
Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.
Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store
Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store
Refixing old 15mm steel tubing and connections in new or old position (walls, ceiling and floors etc) complete all as specified and directed
Refixing old 20mm steel tubing and connections in new or old position (walls, ceiling and floors etc) complete all as specified and directed
Supply and Fix in rep 15mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed
Supply and fix in rep 20mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed
Supply and fix in rep Central Hole brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S & F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.
S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers
S & F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
S&F in repair vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.
S&F in repair Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest and 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.
S & F health foucet with duble lock 1.2 mtr stainless steel flexible hose & wall hook(Make Hindware Cat No 16000)
S&F soap dish, any type, fiexd to plugs with chromium plated brass screws
S&F CP towel rail, fixed with chromium plated brass screws
S&F in rep PVC (SWR) WC connector 110mm dia.
S&F in rep sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP brackets guards and railing 60cm long etc complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L for Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and earth dolly for one light / Fan point controlled by one way switch 6 Amp complete all as specified and directed.
M&L for Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet (HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified and as directed.
All as per item No 105 hereinbefore but for one 3 pin socket outlet 5 Amp on the independent board.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor 6 sq mm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down/ dismantling of old one complete all as specified and directed.
Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 Volts complete all as specified & directed. Make : Anchor/Legrand/Crabtree
S & F Switch Socket combination 6 Pin15 Amp 230 Volts complete all as specified and directed Make : Havells/Anchor/Richa.
Supply and fixing switch socket combination, 3 pin, 6 Amp piano complete all as specified & directed. Make : Anchor/Legrand/Crabtree
Supply and fixing lamp holder, insulated body wth back plate suitable for batten fitting complete all as specified & directed. Make : Anchor/Legrand/Crabtree
S & F LED lamp 10 Watt, CDL, B-22 cap (pin type), 230V, PF not less than 0.85 (min) complete all specified and directed. Make: Havells/ Bajaj/ Philips/ CG
SS & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make: Havells/ Bajaj/ CG/ Phillips
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. Make : Anchor/Legrand/Crabtree
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Anchor/Legrand/Crabtree
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder, two square box for mounting including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Havells/ Bajaj/ Philips/ CG.
Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 4 way, 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed. Make : Havells/ABB/Schneider/Legrand
Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed. Make : Havells/ABB/Schneider/Legrand/L&T
Supply and fixing miniature circuit breaker (MCB) SP 5 To 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed. Make : Havells/ABB/Schneider/Legrand/L&T
Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed. Make : Havells/ABB/Schneider/Legrand/L&T
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 50 litre, BEE 5 star rated complete with accessories such as safety wall, thermostate, NRV connection pieces etc. complete all as specified and directed by Engr in charge
S&F 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV 20mm outer diameter stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random complete fittings as per site requirement fixed and laid in trenches/floor/under culvert/road crossing etc, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. Make : SFMC or equivalent (Note: Exacavation and earhwork shall be measured and paid for separately.)
Supply and fix PP-R Gate valves 20 mm bore with iron wheel head screwed both end as per site requirement incl dismentling and taking down unserviceable one complete all as specified and directed.
S&F Bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge.
M & L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete
Supply and laying sub main wiring two single core 6 sq mm stranded copper conductorof red & Black colour including 4 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing n caping of suitable size for accomadating the wires Complete
M/L for submain wiring along with earth wire with folowing sizes of PVC insulated copper conductor single cofe cable in surface/recessed in suitabled size of casing and caping as required with 2x10.0 sq. mm + 1x6.0 sq. mm earth wirecomplete all as spd and directed by Engr in Charge. Havells/Polycab/Grandlay/HPL or equivalent in approved makes
Supply and fix PVC rectangular block for mounting DB's with 3 mm thick plastic laminated sheet cover of size 35 cm x 30 cm x 5 cm complete all as specified and directed. Make: Prestoteak, Prestoplast, Anchor.
Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder, two square box for mounting including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Havells/ Bajaj/ CG/ Phillips.
Taking down carefully to existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.
Taking down carefully to existing main switches,DBs alongwith existing board and removing the same from the site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.
Taking down carefully to submain wiring complete all as specified and directed.
M/S ASHOK CONSTRUCTION
M/S DK TRADERS
M/S YOGENDRA CONSTRUCTION CO
M/S R N ENTERPRISES
M/S SUNRISE CONSTRUCTION AND CO
M/S SM ANSARI
M/S THONGDOK ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .