PROVN OF STAINLESS STEEL PLATE RACKS AT FAFA ACCN (PRATAP PARK), SPECIAL REPAIRS TO ELECTRIC INFRA AT SOWC SPECIAL REPAIRS TO LT PANELS AND ALLIED WORKS AT LOHRA MARG, SPECIAL REPAIR TO LT PANELS AND ALLIED WORKS AT OD COMPLEX UNDER GE(E) MATHURA

Amount

M&L for stainless steel plate rack. Make :- Prayag cat Part No P-310 or equivalent.

Supplying, laying or fixing or passing through pipe, testing and commissioning XLPE insulated, strip or wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of following nominal cross sectional area :-

185 Sqmm 3.5 core.

120 Sqmm 3.5 core.

95 Sqmm 3.5 core.

50 Sqmm 3.5 core.

35 Sqmm 3.5 core.

16 Sqmm 4 core.

10 Sqmm 4 core.

Supplying, laying or fixing in repairs, passing through pipe, testing and commissioning XLPE insulated, strip or wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of following nominal cross sectional area :-

240 Sqmm 3.5 core.

120 Sqmm 3.5 core.

95 Sqmm 3.5 core.

70 Sqmm 3.5 core.

50 Sqmm 3.5 core.

25 Sqmm 4core.

16 Sqmm 4 core.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft rock i.e PCC, bitmumous road, paver blocks etc complete and making good to match with existing (Any damage to existing Paver blocks, road cutting, tiles, PCC etc shall be making good by contractor without any cost to the deptt.) Complete all as specified.

Returning filling with earth/soil obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning.

Supply and Laying Unreinforced precast concrete cable cover class LV type 1, size 250mmx150mmx40mm complete as directed.

M&L for Steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of following sizes complete:-

50 mm bore

80 mm bore

S & F factory made epoxy powder coated Distribution Board TPN 4 ways ( MCB DB ) with metal door ( IP-43 protection ) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with Knockouts complete all as specified.

Supply and fixing MCB TPN 63 Amp,50 Hz 415 V with rapturing capacity 10 kA.

Dismantling stay assembly complete.(demolition of concrete, etc. and excavation measured separately) all as directed by Engr-in-Charge.

Dismantling of old unserviceble Aluminium conductor off sizes from existing over head lines complete all as specified and directed by Engr-in-Charge.

Dismantling/taking down old unserviceable pin/loop/shackle type insulator any type / size.

Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost complete. Note: GI strip upto 5m length from earth electrode shall be deemed to be included in unit rate quoted.

Dismantling unserviceable any size of cross arms and anti climbing devices from pole /structures etc complete all as specified and directed.

Supply and fixing thermoplastic polystyrene/polycarbonate enclosure busbar chambr three phase four wire of 100 amp rating of size 202 mm x 238 mm x 111 mm complete with shock proof, vermin proof and dust proof halogen and silicon free UV resistane with internally embedded gasket high grade gasket made of polyurethane complete with required terminals (1 row, 6 module) with one no. MCB SP 16 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole /wall complete all as specified and directed. Make: SINTEX/ABB/HENSEL/PSC

M&L for Cable route indicator showing "LT Cable" and route/joint of cable with arrow made of CI in suitable eliptical shape and fixed on angle iron 40x40x6mm, 600mm long painted in Blue Colour with two coats of synthetic enamel paint cover a coat of red oxide primer duly embaded in PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate block 400x500x200mm fixed and erected on PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate platform of size 400x400x100mm grouted in ground including 10mm thick rendering in CM 1:6 on concrete suface and applying two coat of cement base paint, complete all as directed and specified.

Supply and fixing aluminium conductor cables weather proof flat twin core size 2.5 sqmm complete all as specified and directed.

Supplying, installing, testing and commissioning OUT door type, Cubicle type, LT Panels box in repair made out of MS sheet of 3.15mm thickness outer sheet and inner sheet thickness 2 mm suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved for 35 MVA rupturing capacity at 415 volts, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93 mounted on suitable PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate foundation comprising of the following as approved wirh following accessories:- (a) Aluminium busbar of 800 Amp for three phase and 600 Amp for neutral. (b) MCCB Adjustable thermal release ,magnatic type , 4 pole 415 volts, 630 Amp, 50 kA- 02 Nos. (01 Incoming, 01 Spare). (c) MCCB 200 Amp 4 pole, 25kA -03 Nos. (01 sapre). (d) MCCB 160 Amp 4 pole 16kA -03 Nos. (e) MCCB 125 Amp -01 No. (f) Digital Amp meter (0-250)-01 No. (g) Digital Volt meter (0-500) -01 No. (h) Indicating lamp LED cluster type set of three in red/blue/green colour - 01 No. (j) Timer switch, 415 volt, 50 Hz-01 No.

Supplying, installing, testing and commissioning OUT door type, Cubicle type, LT Panels box in repair made out of MS sheet of 3.15mm thickness outer sheet and inner sheet thickness 2 mm suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved for 35 MVA rupturing capacity at 415 volts, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93 mounted on suitable PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate foundation comprising of the following as approved wirh following accessories:- (a) Aluminium busbar of 300 Amp for three phase and 200 Amp for neutral. (b) MCCB 250 Amp 4 pole, 25kA -02 Nos. (01 Incoming, 01 Spare). (c) MCCB 100 Amp 4 pole, 16kA -05 Nos. (01 Spare). (d) Digital Amp meter (0-250)-01 No. (e) Digital Volt meter (0-500) -01 No. (f) Timer switch, 415 volt, 50 Hz-01 No. (g) RYB Indicator-01 Set.

Supplying, installing, testing and commissioning OUT door type, Cubicle type, LT Panels box in repair made out of MS sheet of 3.15mm thickness outer sheet and inner sheet thickness 2 mm suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved for 35 MVA rupturing capacity at 415 volts, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93 mounted on suitable PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate foundation comprising of the following as approved wirh following accessories:- (a) Aluminium busbar of 400 Amp for three phase and 300 Amp for neutral. (b) MCCB 315 Amp , 4 pole, 36kA - 02 Nos (01 Inoming, 01 Spare). (c) MCCB 250 Amp , 4 pole, 16kA -03 Nos (01 sapre). (c) Digital Amp meter (0-250)-01 No (d) Digital Volt meter (0-500) -01 No. (e) RYB Indicator-01 Set. (f) Timer switch, 415 volt, 50 Hz-01 No.

Supplying, installing, testing and commissioning OUT door type, Cubicle type, LT Panels box in repair made out of MS sheet of 3.15mm thickness outer sheet and inner sheet thickness 2 mm suitable for 3 phase, 4 wire, 415 volts, 50 Hz and CPRI approved for 35 MVA rupturing capacity at 415 volts, factory made in an approved factory having seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust / vermin proof & general construction confirming to IS:8623 / 93 mounted on suitable PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate foundation comprising of the following as approved wirh following accessories:- (a) Aluminium busbar of 300 Amp for three phase and 200 Amp for neutral. (a) MCCB 250 Amp , 4 pole, 25 kA -02 Nos (01 Incoming, 01 Spare). (b) MCCB 125 Amp, 4 pole, 25kA -02 Nos (01 sapre). (c) MCCB 100 Amp,4 pole, 25kA-03 Nos. (d) Digital Amp meter (0-250)-01 No. (e) Digital Volt meter (0-500) -01 No. (f) RYB Indicator-01 Set. (g) Timer switch 415 volt, 50 Hz-01 No.

Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth for foundation & getting out in for laying of cable in soft /loose soilcomplete as specified.

Ms Kamal Kant Agarwal