Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹17.4 LAdmitted-Finance | -1.00% | ₹17.4 L | L1 | Admitted-Finance |
| 2 | L2₹17.5 LAdmitted-Finance | +0.00% | ₹17.5 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical Non Responsive |
Tender Value
₹17.5 L
EMD Value
₹35,051
Closing Date
10 Apr 2026, 12:00 pmClosed
Executive Engineer PHED Dist. Rural Division Ist J
Executive Engineer PHED Dist. Rural Division Ist Jaipur
REPLACEMENT AND INSTALLATION OF SUBMERSIBLE PUMP SETS, FEEDER PANEL, GI LOWERING PIPE, VALVE, SUB CABLE IN EXISTING SOURCES AT VARIOUS SCHEME UNDER SUB DN. SANGANER.
2026_PHCJA_549554_1
NIT No. - 05/2026-27
Open Tender
Civil Works - Roads
90 days
As per tender
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Executive Engineer PHED Dist. Rural Division Ist
₹35,051
Yes
15 Apr 2026
2 Apr 2026
10 Apr 2026
2 Apr 2026
10 Apr 2026
2 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | |||||
| 1.01 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. | - | KW | - | - |
| 2Providing & Lowering in tube well ISI marked GI Pipe medium duty ("B" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. | |||||
| 2.01 | 50 mm dia | - | Mtr | - | - |
| 3Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-1/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. | |||||
| 3.01 | 10.0 Sq.mm, 4 core | - | Mtr | - | - |
| 4Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 4 including making connection etc. | |||||
| 4.01 | 3 core 4.0 Sq.mm | - | Mtr | - | - |
| 5Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | |||||
| 6Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, fully automatic star delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand (made of angle iron of size 2.18 6 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. | |||||
stage.html
html • 0.03 MB
technical_979689.pdf
techsummary_979689.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Tender.pdf
Tender Documents • 6.52 MB
BOQ_979689.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid