AR and MO to various residential buildings under division No.III Shimla. SH Miscellaneous repair work in set 9.2 G.F Type IV at Nabha Estate Shimla.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadcomplete including carriage of materials within all leads and lifts.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Dismantling Cement asbestos or other hard board ceilings or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work including carriage of materials in all leads and lifts in foundation and plinth.

Half brick masonry in common burnt clay building bricks in super-structure above plinth level upto floor all level in Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks complete including carriage of materials within all leads and lifts.

Providing wood work in Doors and windows and the like wrought framed, hoisted and fixed in position. complete including carriage of materials within all leads and lifts :-2nd class deodar Wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.complete. including carriage of materials within all leads and lifts.:- Rae wood/chill wood

Providing and fixing 40 mm thick deodar wood shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge

Providing and fixing 40mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. complete including carriage of materials within all leads and lifts as per direction of Engineer-in-charge in 2nd class deodar wood.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing 0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts.:(i) 250x16mm

Providing and fixing aluminium tower bolts transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts.200x10 mm size.

Providing and fixing aluminium tower bolts transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts.150x10 mm size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts.125mm size.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials within all leads and lifts.100mm size.

Providing and fixing 60x12mm hard wood corner beading with wood screws in glazing patition etc including carriage of materials within all leads and lifts.2nd class deodar wood.

Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts

Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts.

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts.

Providing and fixing square edged cover fillets (beading) 19x6mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts

Providing and fixing Brass furniture handles with screws etc. complete: 100MM including carriage of materils within all leads and lifts

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts.

Providing and fixing 6 mm thick plywood linning ceiling of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm.

Providing and laying Vitrified tiles in any size (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.

Providing and fixing pipes on wall face PVC Finolex type "B" pipes including filling the joints with approved adhesive and inclunding require No. of coller and clamps etc complete including carriage of materials within all leads and lifts.110mm dia

Providing and Fixing of Hydrolic Door Closer Godrej/ Clasic / Krishna Make approved brand at store of Sub Division No.II at IGMC. Section-II & III including carriage of materials within all leads and lifts.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair/rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. including carriage of materials in all leads and lifts.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. including carriage of materials within all leads and lifts

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials within all leads and lifts :-Solid Type :-White plastic seat and cover HINDWARE MAKE

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 mm X 90 mm.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts

Providing and fixing C.P. towel rod 600x120mm including carriage of materials within all leads and lifts.

Providing and fixing CP Brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials within all leads and lifts

Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts.

Providing and Fixing of angle Cock 15mm Nominal size of approved brand including carriage of materials within all leads and lifts.

Providing and fixing CP brass Sink mixer of approved quality with fittings complete including carriage of materials in all leads and lifts

Providing and fixing CP brass Wall mixer of approved quality with fittings complete including carriage of materials in all leads and lifts

Providing and fixing wash basin with pedstal C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. with brass pillar tap.

Providing and fixing C.P waste coupling 32mm Dia for wash basin including carriage of materials within all leads and lifs cat no 4921

Providing and Fixing of PVC. Waste Pipe 32mm Nominal size of approved brand as per direction of engineer in charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing bevelled mirror 600 x450 mm ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing uplasticised PVC connection pipe with brass unions : including carriage of materials within all leads and lifts 15 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore

Providing and fixing G.I union 15mm including carriage of materials within all leads and lifts.complete. including carriage of materials within all leads and lifts

Providing and fixing Ess-Ess Curtain rod 25mm dia with brackets,end firnels and required number of curtain rings with screws etc.complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge.

Providing and fixing 610mm x510 mm bowl depth 150mm size Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board complete including carriage of materials within all leads and lifts.

Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts

Providing and fixing high pressure PVC Type B spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110mm

Providing and fixing PVC Finolex type "B" collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. 110mm nominal size.

Providing and fixing PVC (Finolex) plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia.

Providing and fixing PVC (Finolex) plain Tee ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-110 mm dia.

Providing and fixing M.S welded mesh 25x25x3mm to angle iron frame work complete including welding by electric plant and including applying a priming coat of red lead paing and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Disposal of surplus excavated earth by Mechanical with in all leads on approved dumping site of M.C. Shimla or otherwise including payment of prescribed charges of dumping to the owener of dumping site through all mode of transportation including head load animal load or mechanical means alongwith its leveling and to complete the work of mechanized means and labour (if any required).The dumping site to be arranged by the contractor entirely at his own risk and cost. All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the course of diisposal shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of Engineer-in-Charge.