Permanent restoration from ls 0 to 100m, 200 to 300m, 2700m to 3300m in Arumugamangalam tank in Arumugamangalam village in Eral taluk of Thoothukudi district

Amount

Earthwork in all kind soils except hard rock requiring blasting and conveying for formation of bund with a lead of 0m to 100m deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods, sectioning etc., complete complying with standard specification and as directed by the departmental officers.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders etc., complete complying with standard specification and as directed by the departmental officers.

Earthwork excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size of boulders hard gravelly soil inclusive of shoring to full depth strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated soil other than sand in layers of not more than 15 cm thick, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 metres and initial lift of 2 metres and clearing, levelling the site etc., complete complying with standard specification and as directed by the departmental officers.

Earthwork in all soils except hard rock requiring blasting and conveying with a lead of 0 - 100M by deploying earth moving machineries and tippers for formation of bund in layers of suitable thickness, depending upon type of compaction equipment deployed , and not exceeding 23 cm thickness, benching of slopes prior to placement of earth fill, including extra earth filling , breaking clods, watering to OMC and compaction of each layer to 95% of Proctor density through deployment of appropriate compaction equipment 8-10 tonne power roller ; vibratory power roller ; short width (+/-)0.90m width drum) power roller or vibratory power roller ensuring compaction of designed bund section and also ensuring compaction of earth fill and side slopes through the deployment of hydraulic excavators with steel plate fixtures attached to their booms/ heavy power rollers capable of climbing 2.00 (Horizontal) : 1.00 (Vertical) slope including side slopes as directed by the engineer in charge of works and as per technical specifications.

Earthwork in all soils except hard rock requiring blasting and conveying with a lead of 1KMCT by deploying earth moving machineries and tippers for formation of bund in layers of suitable thickness, depending upon type of compaction equipment deployed , and not exceeding 23 cm thickness, benching of slopes prior to placement of earth fill, including extra earth filling , breaking clods, watering to OMC and compaction of each layer to 95% of Proctor density through deployment of appropriate compaction equipment 8-10 tonne power roller ; vibratory power roller ; short width (+/-)0.90m width drum) power roller or vibratory power roller ensuring compaction of designed bund section and also ensuring compaction of earth fill and side slopes through the deployment of hydraulic excavators with steel plate fixtures attached to their booms/ heavy power rollers capable of climbing 2.00 (Horizontal) : 1.00 (Vertical) slope including side slopes as directed by the engineer in charge of works and as per technical specifications.

Gravel backing for revetment and apron in layers not exceeding 15cm thick, including watering, consolidation and trimming the top surface so as to receive the Rough Stones and including stacking for pre measurement etc., complete complying with standard specification and as directed by the departmental officers

Manufacturing and fixing of M15 grade cement concrete block of size 300X250X200mm using hard broken stone aggregate of maximum nominal size of 20mm including moulding charges casting of blocks, finishing, curing and conveyance of all materials to work site and fixing the same in postion and handling charges for the same in position including all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers.

Providing and placing in position Plain Cement concrete of M-10 using broken hard granite coarse aggregate (well graded) of nominal maximum size of 40mm to IS specified grading and using crushed stone sand(m-sand) ( to achieve the specified characteristic strength of 10 N / mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by baling/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specification and as directed by the departmental officers.

Providing and placing in Position of Plain cement concrete of grade M15using hard broken stone aggregate of maximum nominal size of 20mm to IS specified grading and using crushed stone sand(m-sand) ( to achieve the specified characteristic strength of 15 N / mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by baling/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specification and as directed by the departmental officers. (Without vibration)

Providing and placing in Position of Plain cement concrete of grade M15 using hard broken stone aggregate of maximum nominal size of 60% of 40mm and 40 % of 20mm IS specified grading and using crushed stone sand(m-sand) ( to achieve the specified characteristic strength of 15 N / mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by baling/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specification and as directed by the departmental officers.

Providing and placing in Position of Plain cement concrete of grade M20 using hard broken stone aggregate of maximum nominal size of 20mm to IS specified grading and using crushed stone sand(m-sand) ( to achieve the specified characteristic strength of 20 N / mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by baling/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specification and as directed by the departmental officers. (Without vibration).

Supplying and erecting water tight steel centering for sides and sofits including supports and strutting upto 3.29M height for plain surface such as RCC slab, vertical slabs, side slabs of RCC works wioth all cross bracings using mild steel B.G.10gauge sheets of size 90cm x60cmx10 gauge stiffend with welded mils dteel angels of size 25mm x25mmx3mm for boarding laid over silver oak(country wood) joists of size 10cmx6.5 spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by the Engineer incharge of work (The retrieved materials should be taken back by the contractor). The payment should be made after the concrete is laid.

Without Strutting

With strutting above G.L upto 3.29m

Refilling the excavated earth in layers not exceeding 23cm thickness and watering to OMC (Optimum Moisture content) and compaction of each layer to 95% of proctor Density through deployment of appropriate compaction equipment (8-10T power roller) vibratory power roller of short width ( 0.90m width drum) power roller or vibratory power roller/fuel operated or electrically operated, vibratory plate compactors, ensuring compaction of designed bund section including side slopes etc., complete as directed by the Engineer in charge of works and as per the technical specifications.

GST at 18%

VIDHYASAGAR