Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹17.8 L+₹33,333.52 (1.91%)Rejected-Finance | L2 | Rejected-Finance Being Not Lowest | |
| 3 | L3₹18.1 L+₹67,235.75 (3.85%)Rejected-Finance | L3 | Rejected-Finance Being Not Lowest | |
| 4 | L4₹19.2 L+₹1.7 L (9.90%)Rejected-Finance | L4 | Rejected-Finance Being Not Lowest | |
| 5 | L5₹19.4 L+₹2.0 L (11.2%)Rejected-Finance | L5 | Rejected-Finance Being Not Lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MCEME SECUNDERABAD
GE MCEME Secunderabad MCEME Campus, Trimulgherry (Post) Secunderabad - 500 015
COMPREHENSIVE REPAIR WORKS TO FEME / FEMT AND OFFRS MESS IN ZONE - I AREA UNDER GE MCEME SECUNDERABAD
2022_MES_542741_1
GE/MCEME/TOK/37 OF 22-23
Open Tender
Civil Works
Item Rate
180 days
GE MCEME SECUNDERABAD
Class E Category a(I)
7 documents required · 7 mandatory
₹500
GE MCEME SECUNDERABAD
₹50,000
Yes
25 Oct 2022
2 Aug 2022
3 Sept 2022
2 Aug 2022
31 Aug 2022
18 Aug 2022
Amount
Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specificed and as per directed by Engineer-in-Charge.
M&L for brick work with fly ash modular bricks straight or curved on plan exc 06m mean radius built in CM 1:6 complete all as specificed and as per directed by Engineer-in-Charge.
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement complete all as specificed and as per directed by Engineer-in-Charge.
M&L 15mm thick rendering in two layers (5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6) on external surfaces of brick work or concrete surfaces even and smooth without using extra cement, etc complete all as specified and as per directed by Engineer-in-Charge.
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L for rendering 5mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L 15mm thick rendering in two layers (5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6) on external surfaces of brick work or concrete surfaces even and smooth without using extra cement, including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as per directed by Engineer-in-Charge.
M&L for preparation newely plasterd surfaces of ceiling and applying of three coats of white wash on all as directed by Engr-in-Charge
M&L for preparation of newly plasted surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant paint complete all as specificed and as per directed by Engineer-in-Charge.
M&L for preparation of newely plasted surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant paint complete all as specificed and as per directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specificed and as per directed by Engineer-in-Charge.
M&L for PCC 1:2:4 25mm thick, type B0 (12.5mm graded stone agg) as as floor finishes complete all as specificed and as per directed by Engineer-in-Charge.
M&L for 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying of floor finished complete all as specificed and as per directed by Engineer-in-Charge.
M&L for Glazed ceramic coloured tiles 450x300x7mm thick in vertical surfaces such as dados over and including 10mm thick rendering in CM 1:4 to receive tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specificed and as per directed by Engineer-in-Charge.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specificed and as per directed by Engineer-in-Charge.
M&L for Vitrified Ceramic coloured tiles 8-9mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match etc. including dismantling existing tiles complete all as specificed and as per directed by Engineer-in-Charge.
Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames) complete all as specificed and as per directed by Engineer-in-Charge.
Taking down chowkhats or frames exc 1.50 not exc 4.00 sqm each(without taking off shutters from the frames) complete all as specificed and as per directed by Engineer-in-Charge.
Taking down, Shutters of any description exc 1sq. M but n.exc 2 Sqm each, etc complete all as specificed and as per directed by Engineer-in-Charge.
M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specificed and as per directed by Engineer-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.
M & L for Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 150 mm etc complete all as spd and directed.
S & F for Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100 mm, etc complete all as specificed and as per directed by Engineer-in-Charge.
S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 150 mm,etc complete all as specificed and as per directed by Engineer-in-Charge..
S&F in repairs for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples complete all as specificed and as per directed by Engineer-in-Charge.
M&L for 2nd Class hardwood plain fillets, square or triangular in section,clean swan, secured with nails or brads croos section exc 13 Sqcm but Not Exc 25 Sqcm complete all as specificed and as per directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one, complete all as specified and directed by Engineer-in-Charge.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 sqm in each pan, complete all as specified and directed by Engineer-in-Charge.
S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.5 sqm in each pan, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 20mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
S&F in repairs 25mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
S&F in repairs 40mm dia for high density polythelyne pipes (HDPE) of pressure rating 06 kgf/Sqm fixed complete to wall or in floors etc. complete all as specificed and as per directed by Engineer-in-Charge.
M&L for Granite (jet black) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specificed and as per directed by Engineer-in-Charge.
Rounding off edges of granite platform/urinal partition, complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC (SWR) gully grap 125/110 mm setting and jointing with solvent cement and preparation of trap hole complete all as directed by Engr-in-Charge
S&F 500 Ltr capacity of rotational moulded polythylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part-I complete all as specificed and as per directed by Engineer-in-Charge.
S&F 1000 Ltr capacity of rotational moulded polythylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part-I complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs, 10 litre capacity, low level PVC flushing cistern, syphonic action type white colour, with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge
S&F in repairs viterous China squatting pan "Orissa Pattern" size 580 x 440mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge
Taking up or down steel tubing & connections, 15 mm dia complete all as specificed and as per directed by Engineer-in-Charge.
Taking up or down steel tubing & connections, 20 mm dia complete all as specificed and as per directed by Engineer-in-Charge.
Taking up or down steel tubing & connections, 25 mm dia complete all as specificed and as per directed by Engineer-in-Charge.
Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 20mm bore on walls/ceiling or laying in floors including specials (nipple, socket, reducer, union, elbow etc) complete all as specified and directed
Supplying and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings 25mm bore on walls/ceiling or laying in floors including specials (nipple, socket, reducer, union, elbow etc) complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 15 mm complete all as specificed and as per directed by Engineer-in-Charge.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 20mm complete all as specificed and as per directed by Engineer-in-Charge.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 25mm complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and as directed by Engineer-in-Charge
Taking down eaves, gutters and rain water pipes including all fittings any size and pattern complete all as specificed and as per directed by Engineer-in-Charge.
S&F PVC (SWR) 100/110mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps complete all as specificed and as per directed by Engineer-in-Charge.
S&F PVC (SWR) bend/shoe for 100/110mm dia complete all as specificed and as per directed by Engineer-in-Charge.
S&F PVC (SWR) 75mm dia single socketed pipe including jointing with solvent cement complete all as specified and as directed.
S&F PVC (SWR) bend/shoe for 75mm dia complete all as specificed and as per directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specificed and as per directed by Engineer-in-Charge.
S&F anodised aluminium snap grid of 605x605mm frame work for ceiling including Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specificed and as per directed by Engineer-in-Charge.
M & L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs CP brass wall mixture 15mm dia for hot and cold water screwed down for iron pipe and fixed complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specificed and as per directed by Engineer-in-Charge.
S&F in repairs Gun metal globe or gate valve 20mm bore dia of pipes, with iron wheel head screwed both ends for iron pipe and fixed complete all as specificed and as per directed by Engineer-in-Charge.
Demolition of old cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specificed and as per directed by Engineer-in-Charge.
M & L for 100 mm thick, Cement concrete type B- 2, 1:2:4 (40mm graded aggregate), etc complete all as specified and directed by Engr-in-Charge.
M & L 75 mm thick PCC type D2, 1:4:8 (40mm graded aggregate) hard standing complete all as specificed and as per directed by Engineer-in-Charge.
M&L for dismantling stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specificed and as per directed by Engineer-in-Charge.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specificed and as per directed by Engineer-in-Charge.
M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for laying floor finishes complete all as specificed and as per directed by Engineer-in-Charge.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specificed and as per directed by Engineer-in-Charge.
S & F in rep Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed,etc complete all as specificed and as per directed by Engineer-in-Charge.
S& F in repair Mortice lock in aluminium doors complete all as specificed and as per directed by Engineer-in-Charge.
S&F in rep central hole basin mixer with regular spout with popup waste system with 450 mm long braided hoses complete all as specificed and as per directed by Engineer-in-Charge.
M&L for 6 to 7 mm thick Gypsum board panels 600x600mm with PVC laminated on one side and aluminium foil on another side suitably placed in false ceiling grid made of aluminium GI/MS complete all as specificed and as per directed by Engineer-in-Charge. Note: Aluminium grid will be measured and paid separately
S&F Windows/ventilators (NCL ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47x20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws complete all as directed
M&L for re-screwing or easing & adjusting aluminum shutter with out taking down shutter and repair/replacement of butt hinges/pivote of aluminu door exc 1Sqm & n.exc 4 Sqm all as directed by Engineer-in-charge.
VACON INFRASTRUCTURES
NEWS CONSTRUCTIONS
P VIJAY KUMAR
K LAKSHMAN SINGH AND CO
harshraj and co
BHEEMRAO PATIL CONTRACTOR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .