SPECIAL REPAIR TO CERTAIN OMQS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises.

Demolition of cement concrete in ground floor including tile, terrazo tile and paving n exc 15cm thickness(below or above ground level) unreinforced concrete.

Removing of salvage material/ soil n.exc 50mtr and depositing where directed at level n.exc 1.5M tr above starting point complete all as directed.

M &L 30 mm thick PCC (1:2:4 ) type B0 using 12.50 mm graded stone aggregate as in floor for sunkun only all as specified and directed.

M & L Cement concrete 1:5;10 Type E2 40mm Graded stone aggregate filling and mass concrete in sunkun floor complete all as specified and directed.

M & L 15mm thick screed bed or bedding layer in CM 1 : 6 for laying of floor tile all as specified and directed.

Material and labour Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed.

M&L for rendering to stone masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified

M &L Glazed Ceramic tiles coloured, of size 450mmX35mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed.

Taking down cement plaster on brick or stone walls/ceilings etc including raking out joints , hacking for key and scrubbing down with water etc complete all as specified and directed.

M &L rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m all as specified and directed.

M &L rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

Rendering 15mm thick in CM(1:4) on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames incl making good with existing surface inlcuding plaster complete all as specified and as directed by the Engineer-in-Charge

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge

S&F 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed in windows all as specified and directed.

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and directed.

S&F Butt hinges 100mm, heavy weight, cold rolled mild steel, and fixed as specified and directed.

Taking down Shutters of any description exc 1.5 sq. m but n exc 4 sq. m each incl making good with existing surface inlcuding plaster complete all as specified and directed.

Supply and fix factory made kiln seasoned chemically treated 35 mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive glass/gauge etc., without sash bars but divided into two panels, with bottom panel fitted 9 mm B.W.P. comercial ply or 12 mm venered particle board with commercial veneering, (half panel board & half wire mesh) wood additional stiles/rails edges of framing plain, chamfered or rounded fitted with miterd beads for receiving glass, gauge etc,size of members of door shutters as specified in SSR part I section 3 Clause 8.20(a) fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge Note- wire cloth will be measured and paid separtely.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix factory made 35 mm thick second class hard wood plain framed paneled shutters (two panels) with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part I section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as specified and directed

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm

Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F Anodised aluminium frame for Ventilators only and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-charge.

Supply and fix sheet glass, ordinary quality, 4 mm thick, in squares not exc 0.50 Sqm in each pane and glazing with oil putty complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix aluminium window shutters including frame powder coated (Thickness of powder coating not less than 50 micron) sliding in Three tracks in which 02 shutters madeup of glass 4.0mm thick and 01 shutter with steel wire mesh of aperture not exceeding 1.40 mm sliding shutter with all fitting and fixture incl locking arrangement complete all as specified and directed.

S&F Anodised aluminium grill (deco grill) any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified.

S&F SS fancy type curtain rod with brackets and nob fancy type and taking down old complete all as specified and as directed by the Engineer-in-Charge.

Taking down cupboard shutter with sheleves cub boards n.exc 1.5 sq mtr each (One cupboard set) of any type complete all as specified and as directed by the Engineer-in-Charge.

Material and labour Second class hardwood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

supply and fix 20mm thick flush shutters, solid core construction, with block board core and plywood face panels for cabinet and cupbord, commercial type on both sides complete, as specified and directed

S & F 12mm Plywood, grade BWP, type BB, fixed with screws to timber frame work for cabinet and cupbord, commercial type on both sides complete, as specified and directed

M & L 1mm to 1.5mm thick sunmyca sheet glossy finish any colour paste with favicol on plywood for cabinet and cupbord, commercial type on one sides complete, as specified and directed

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed by the Engineer-in-Charge.

S & F 50mm dia, polished, hard wood knobs fixed with screws omplete all as specified

S&F brass magnet for cupboard complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fix 100 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

M&L for Teak wood lipping 6 mm thick 18/19mm wide fixed with nails complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix vitreous china wash down water closet pan (Pedestal type), Indo- western white including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F in repairs white /black plastic seat cover solid confirming to ISI any type complete all as specified and directed.

Supply and fix vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.

S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete.

S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.

S&F steel tubing 20 mm bore pipe complete all as specified and including taking down old U/S pipe as directed by the Engineer-in-Charge.

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed and including taking down old U/S pipe.

Supply and fix 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.(make- parryware/ jaguar)

S&F angle valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.(15mm bore).(make- parryware/ jaguar)

Supply and fix 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.(make- parryware/ jaguar)

S&F brass CP shower rose with arms 75 mm size fixed to pipe all as in repairs specified and directed.(make- parryware/ jaguar)

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) and fixed in repairs all as specified and directed.

S&F sinks with drainage board made of 304 grade stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F sinks without drainage board made of 304 grade stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in repairs all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs all as specified and directed.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortar all as specified and directed.

M & L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

S & F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.

S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed.

S &F75mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F75mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints but fixed in wall all as specified and directed.

S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

S &F110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints but fixed in wall all as specified and directed.

S &F75mm bore PVC(SWR) bend in floor all as specified and directed.

S &F110mm bore PVC(SWR) bend in floor all as specified and directed.

S&F in repairs brass CP two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. (make- parryware, )

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe.(make- parryware,

Complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment from wall/ceilling surface complete all as directed.

M& L wall putty 3mm th in wall complete all as directed.

M&L two coats of white wash on ceiling surface all as directed.

M&L two coats of distemper oil emulsion and preparation on wall surface all as directed.

M&L for Preparing new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparing old wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for Demolition of concrete of any description and in any position including plastering and leeping (whether full thickness including textile coverings, bitumen felt on roofs removed or only a part thereof) for complete all as directed.

M & L for brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces including roughening surfaces of old concrete roof / floor surfaces by picking, sweeping clean and washing down with water to remove dust,etc

Material and labour 40mm average thick PCC nominal mix 1:2:4 type B0 (12.50mm graded stone aggregate) for roof treatment etc.

Material and labour rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction. Note:- WPC will be measured and paid separately.

Supply only liquid water proofing compound to incorporate in above item.

M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces including APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface and applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as specified and directed

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.

S&F switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.

S&F switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

Supply and fix of any length CPVC pipe of dia 20 mm dia manufactured as per IS:15778 including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge.

S&F in replacement of flap cover with suitable frame work and fixing arrangements for exhaust fan of size 230/300/450 mm sweep complete including removing the existing unserviceable one all as specified and directed by the Engr-in-charge.

SAI RUPA CONSTRUCTIONS

Saiansh Associates