REPAIR/REPLACEMENT OF JOINERY AND MISC B/R WORKS AT 7 AFH KANPUR CANTT

Amount

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

All as per item No 1 but exc 1.5 sqm but n.exec 4 sqm each

Taking down shutters of any description but exc 1 sqm but n.exec 2 sqm each complete all as specified and directed.

S & F for 30mm thick flush shutters, solid core construction, with prelaminated particle board core commercial type on both sides complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. All as specified and directed.

S&F 30 mm thick plain WPC factory made wire mess solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. door should be fixed with SS hinges and SS screw. door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings complete all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

Taking down, easing and adjusting wooden shutters of any description n.exc 1 sqm each refixing in same opening complete all as specified and directed.

All as per items 11, here-in-before, but exc 1 sqm and n.exc 2 sqm each refixing in same opening complete all as specified and directed.

S&F GI wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs MS galvanized wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Butt Hinges medium weight stainless steel 100mm long complete all as specified.

S&F stainless steel sliding door bolts of 250 mm long with hasp and staple(bolt type) and fixing clips of sheets , complete all as specified and directed.

S&F stainless steel sliding door bolts of 150 mm long with hasp and staple(bolt type) and fixing clips of sheets , complete all as specified and directed.

S&F in repair 150mm size mild steel door springs, all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed.

S&F 12 mm thick Toughened glass as in hinged doors, partitions, automatic doors , platform and similar work including cutting to shape, drilling holes & required accessories for fixing complete all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with silicon sealant in square n. exec 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F plain glass 5 mm thick exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down aluminium shutters including repair for smooth functioning including repair/replacement of aluminium snap beading, glazing clips, rubber neoprene packing of any description exc 2 sqm each and refixing in same opening, complete all as specified and directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, complete all as specified and as directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc.,complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonry in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 3mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

S&F in repairs butt hinges medium weight stainless steel 100 mm long, complete all as specified and directed.

S&F in repairs Butt hinge medium weight stainless steel steel 75 mm long, complete all as specified and directed.

S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 150mm long complete all as directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F in repair Aluminium anodized sliding door bolts of 250mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair Aluminium anodized sliding door bolts of 200 mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F mortice lock brass 4 levers vertical type, size 100mm, fixed in repairs complete all as specified and directed.

S&F in repair 100 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed..

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

S&F 4mm dia galvanised steel wire 150x100mm mesh, made up into mattresses or cages, lapped, wire and lain in position including closing after filling complete all as specified and directed.

M&L preparation of new surfaces of steel and iron of any description n.exc 10cm in width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

Dismantling mild steel windows and ventilators of any description complete all as directed.

S&F box type hollow rectangular/square mild steel windows of 2 mm thick tube hinges with MS handle, and MS peg stay, & MS tower bolt complete with glazing bars complete all as specified & directed.

S&F box type hollow rectangular/square mild steel windows of 2 mm thick tube hinges with MS handle, and MS peg stay, & MS tower bolt complete without glazing bars complete all as specified & directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description n.exc 1 sqm each and refixing in same opening, all as specified and as directed.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description exc 1 sqm & n. exe 2 sqm each and refixing in same opening, all as specified and as directed.

Taking down rolling shutter of any size including covering guide, channel etc complete all as specified and directed.

S&F steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hasp and staple and shop coat of primer, erected in position as indicated complete push pull or manual type, thickness of lath 1.25 mm, complete all as specified and directed.

Repair to existing rolling shutters of any thickness making functional of by repairing ball bearing, top cover, anchoring rod roller correcting/straitening of side guide rail etc with and including necessary repairing push, pull or manual type easing rails after greasing complete all as specified and directed Note: Spares such as ball bearings, springs etc will be measured and paid separately as supply only..

Supply only ball bearing for rolling shutter

Supply only springs for rolling shutter

M&L for cutting holes into or through cement concrete slabs etc,chajjas or reinforcement or otherwise , area exc 250 Sqcm, not exc 500 Sqcm all as directed.

S&F in repairs fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

Demolition of Brick work / stone masonry built in cement mortar complete all as specified and directed.

M&L brick work with fly ash bricks , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L cement concrete 1:3:6 type C1 (20 mm graded aggregate) in copings, plinth courses, string courses and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed. (Note : Sample/ design approved by Engineer-in-charge)

S&F in repairs steel window handles fixed with nuts & bolts, screw or welded complete all as specified and directed.

S&F in repairs steel window peg stay with nuts & bolts, screw or welded complete all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S&F Solid PVC Wall panelling consisting of 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications including cover all joints with pvc cover fillets complete all as specified and directed.

S&F 30 mm wide continuous (piano) hinges, stainless steel, bright finish or electrogalvanised, complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) With semi perforated false ceiling tiles of Size 595 x 595 mm of approved texture, 12mm thick micro regular design and patterns having moisture micro regular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Non-combustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

S & F powder coated(Thickness or powder coating not less than 50 micron) door shutters with frame of section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, disc type handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws, sliding bolt, tower bolt & door stopper etc excluding glass & prelaminated board including taking down complete all as specified.

S & F powder coated(Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining, cleats, rubber packing, anodised aluminium snap beading, screws, handle & tower bolt etc & excluding glass including taking down complete all as specified.

Supply and fixing in repairs powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm mm thick, fixed all round of grill as directed : Make : Hildalco/Indalco/ Jindal or equivalent

Supply and fixing in repairs 5.5 mm thick sheet glass, exc 0.50 Sqm in each pane, fixed to aluminium frame work with necessary glazing caps/rubber packeng/gasket screws etc complete all as specified and as directed.

S&F pre-laminated particle board, 12mm thick interior grade, prelaminated both sides with decorative choice laminations fixed with screws of any position complete all as specified and directed.

S&F 75 mm long fancy type metallic handle with wooden finish to match with decorative lamination complete all as specified and directed.

S&F magnetic catcher as per sample approved by GE, complete all as directed.

S&F in repairs 150 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extracted section or cast aluminium alloy and fixed complete, all as specified and directed.

S&F rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed.

Taking down UPVC/Aluminium chowkats or frames exc 1.0 sqm but n.exe 4.0 Sqm each with shutters (without taking off shutters from the frame), all as directed.

Providing and fixing factory made uPVC white colour sliding windows, area nexc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical length in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose).

All as per Item No 81 here-in-before but area exc 2.00 Sqm each

S & F in repairs 18 mm thick 100% Lead free one side plain other side laminated WPC sheet of approved colour for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. complete all as specified and directed.

S & F in repairs 6 mm thick 100% Lead free one side plain other side laminated WPC sheet of approved colour for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. complete all as specified and directed.

S & F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repair runners 45 mm Telescopic (KTS-20) for SS wire basket full extension load capacity 50 kgs complete all as specified and directed.

S&F in repair stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.

S&F in repair chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in - charge.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.

S&F in repair stainless steel pegs set of 6 pegs fixed in wall with Stainless screw etc. complete all as specified and directed.

S&F in repair chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.

S&F in repair door bottom seal with aluminium strip and rubber of size 900mmx40mm fixed with Stainless screw etc. complete all as specified and directed.

S&F powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 5 mm thick ACP sheet (as directed by GE) in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down old partition of following sizes;- Frame:- weight of aluminium section not less than 0.55 Kg/RM Complete all as specified and directed by the Engr in charge

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of white wash complete all as specified.

All as per item No 99 here-in-before but on ceiling.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of wall including filling wall care putty where required and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 103 here-in-before but applying on steel surfaces.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Ditto all as per item No 105 here-in-before but applying on steel surfaces.

M&L preparing old plastered surface of wall and applying two coat of cement base paint over coat cement primer complete all as specified and directed.

M&L preparing old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment of wall preparing the surface and applying two coats of exterior emulsion weather proof paint with anti algal weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algal and high performance exterior wall finish complete all as specified and directed.

M&L for preparing the surface and applying one coats of exterior emulsion weather proof paint with anti algal weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algal and high performance exterior wall finish complete all as specified and directed.

S & F in repair roller blinds opening style vertical foldable, 2 to 3 mm thick of approved colour & suitable size as per site, fixed as per manufacturer instructions complete all as specified and directed.

Material & Labour in repairs for providing and fixing stainless-steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/grab bars etc with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.in required size,shape on walls or on the top of floor or the side of waist slab with suitable arrangement complete all as spfd and directed

S & F in repairs office sign board with iron frame work for ACP board and stainless steel letters including all connected accessories complete all as spfd and directed. Note:- size of sign board will be 3000 mmrX 600 mm X 150mm & letter size will be 300 mm (height) X 50 mm (width) X 5 mm (thick)

S& F in repairs microwave motion sensor high sensitivity, wide range eagle type, with least interface with industrial noise for active & presence detector with infrared lens for glass doors complete all as spfd and directed. Make - Ozone & Model No.:- OZOM-AC-11-ZS or equivalent.

S&F in repairs aluminium anodized disc shape handle 120 mm dia of disc, fixed with four screw for aluminium doors complete all as specified and directed.

S & F in repair 100 mm long stainless steel double action, heavy duty, self closing hinge with SS screw complete all as specified and directed.

SHIVANGI DEVELOPERS (BID ID -3114120)

SHRI SHAYAM KRIPA (BID ID -3118686)

SIDDHIVINAYAK CONSTRUCTIONS (BID ID -3104075)

M/s DKS Engineering Works (BID ID -3105113)