Karnataka

Financial Eval

Works

Irrigation and Other Works

Providing Irrigation Facility through Lift Irrigation Scheme to Lands of SC Farmers of Mallabad Village in Sedam Taluka Kalaburagi District UNDER SCP FOR 2025-26 (RESERVED FOR CAT-I ONLY)

Minor Irrigation Department

Minor Irrigation Division Kalaburagi | Karnataka

Amount: ₹16.3 LCloses: 12 Mar 2026Closed

Bids

1 Bid3 Mar 2026

#	Company	Amount	Status
1	₹11.8 Laccepted-finance	₹11.8 L	accepted-finance

Tender Value

₹16.3 L

EMD Value

₹20,400

Closing Date

12 Mar 2026, 10:59 pmClosed

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

Providing Irrigation Facility through Lift Irrigation Scheme to Lands of SC Farmers of Mallabad Village in Sedam Taluka Kalaburagi District UNDER SCP FOR 2025-26 (RESERVED FOR CAT-I ONLY)

Tender Information

Tender ID

271434

Reference Number

MI/2025-26/IW/WORK_INDENT10924

Tender Type

Reserved

Product Category

Irrigation and Other Works

Location

Minor Irrigation Division Kalaburagi

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredKPWD Class IV & Above Registration Certificate

RequiredGST Registration Certificate

RequiredPAN Certificate

RequiredLatest IT Returns copies

RequiredDomicile certificate of 10 years from competent authority

RequiredCAT-I Reserved Category Certificate Issued by competent authority

RequiredThe Tenderer has quote his rate by excluding GST. However Contract will be concluded for the amount Exclusive of GST but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer /Employer has to accept the revised GST rates for making payment / recovery.

RequiredAnnual Turnover Certificate with UDIN/ Work Done Certificate

RequiredBID CAPACITY

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tender will not be Considered.

Sub-Leasing/G.P.A of Work is Prohibited.

The undersigned reserves the right to accept or reject any or all tenders without assigning any reason.

Contractors should execute the work by procuring cement, steel, pipes and any other material/machineries of IS standard required for the work on their own and necessary test certificates should be produced and approval of the same to be obtained before use of the same.

The contractor have been registered as class-IV & Above Registration Certificate (up load registration certificate of original should be produced while opening the tender)

To qualify for award of this contract each tenderer in his name should have work done certificate/Turnover of Rs. 16.25 Lakhs in any one of the last five years i.e. 2020-21 to 2024-25.(a) Eligible Tenderes will be qualified only if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (AXNX5-B) where A Maximum value of civil engineering works executed in any one year during the last five years i.e. (2020-21 to 2024-25) Upload Audit Report by Chartered Accountant, showing payments received on civil contracts, to facilitate calculating tender capacity and original should be produced while opening the tender)

Security deposit for an amount equivalent to 5% of the Contract Price shall be deducted in every running bill. However, in case of first and final bill the entire security deposit will be deducted from the final bill.

The Tenderer has to quote his rate by excluding GST. However Contract will be concluded for the amount (Exclusive of GST) but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer/ Employer has to accept the revised GST rates for making payment / recovery.

CAT-I Reserved Category Certificate Issued by competent authority

Domicile certificate of 10 years from competent authority

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

Name, address, telephone and email id of the contractor is to be provided

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

Scanned signature of the bidder/ firm/ company authorized representative of the bidder/ firm/ company shall be attached while uploading bid document.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled.

Typographical errors if any will not be the ground for any claims by the contractor.

The intending bidder firm/ company are advised to visit the work site before submission of tenders.

The necessary certificates/ documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e-tender documents. The original certificate/ documents shall be produced for verification when demanded otherwise the tender will be treated as non-responsive bid and rejected.

Addendum /Corrigendum will be published in website for all modifications or corrections if any

The contractor should mention their recent correct postal address and mail address in declaration forms

Incomplete Tender documents will be rejected

All materials like steel, cement etc., required for the above work should be procured by contractor only. No departmental supply of any material shall be made by dept.

As per the Karnataka Building and other construction workers welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills

The Agency should get the bore drilled by authorized riggers (having 7A Licence) and Certificate to be furnished during submission of the bill.

The agency should ensure that the Borewell has sufficient yield and the same to be checked by Temporary electrical arrangements and further works to be carried out.

If the borewell drilled is failed, it has to be reported to the concerned AEE and the agency should take steps for closing the drilled well with available soil and close it at own cost as per Govt order.

The contractor should locate water feasible points through qualified Geologist in the land of the beneficiary selected by the employer. The contractor should have full-fledged geologist with fast rig supporting vehicles and team of workers.

Before drilling of borewells,the point should be once again got confirmed in the consultation with the Geologist.

Proper precautionary measures have to be taken for providing saftey measures to prevent any casualties with respect to failed borewell.

The bidder after installing the pump and motor in successful bore, he should make his own arrangement to test and run the motor and after that the department will take hand over from him.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,400

Important Dates

Last Activity

3 Mar 2026

Published

3 Mar 2026

Download Ends

11 Mar 2026

BOQ Preview

•

Providing Irrigation Facility through Lift Irrigation Scheme to Lands of SC Farmers of Mallabad Village in Sedam Taluka Kalaburagi District

•

Supply and delivery of 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments et...

•

Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments etc., complete with all lead...

•

Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Providing up to 4Cx50 Sqmm Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments etc., complete with all lead and lift as per direct...

•

Labour charges for providing connection using 3.5 x 16 sqmm insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary mate...

•

Supply and delivery at site Brand new best make 1x3x6 Sqm PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendment...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...

•

Providing and installing at site of work 90mm (weight of pipe-1.313 kg) 6 Kg/m2 P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, lev...

•

Refilling available earth around trenches/ pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...

•

Providing, laying and jointing 75 mm dia HDPE pipes PE80-PN6.0 of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at b...

•

Providing, laying and fixing of light Duty 100 mm dia GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads where...

•

Supply and delivery at site wrought middle steel (galvanized) 100 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any etc., complete with all lead and lift as per direction of...

•

Supply and delivery at site wrought middle steel (galvanized) 100 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any etc., complete with all lead and lift as per direction of...

•

Supply and delivery at site of brand new best make 80 mm non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc., complete with all lead and lift as per direction of En...

•

Providing and fixing 80 mm dia kinetic air valve of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/ EN 1074-4. Body and bonnet of DI conforming to I...

•

Providing and fixing DI Resilient seated soft sealing PN10.0 and 80 mm sluice valve of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade...

•

Supply and delivery at site GM (copper alloy) 80 mm dia gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral sea...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground in all kinds of soils upto 300 mm depth for all works other than foundation in all kinds of soils & upto depth n...

•

Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...

•

Providing size stone masonry with hard stone in foundation & plinth with cement mortar 1:6 (1 cement: 6 coarse sand) etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing and laying in position cement concrete mix 1:2:4 using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed...

•

Providing 20 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

•

Erection and positioning of RCC Hume pipe pump house/ Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,...

•

HT Line: Supplying and erection of PSCC Pole-8 Mtr Long, 200 Kg WL including digging of pit, transportation of pole etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supplying and erection of RCC Pole-8 Mtr Long, 115 Kg WL including digging of pit, transportation of pole etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing & fixing of 11 kV, Horizontal Cross Arm-Mild Steel (MS) (Dwg No. BESCOM/ GM/ QS&S/ 04 Dtd 24.11.2018) etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing and stringing of Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/Km etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories etc. complete and as directed by...

•

Providing 11 kV Ceramic Pin Insulator (Shell Only) etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing 11 kV GI Pin for 11 kV Ceramic Shell Insulator etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing DISC Insulator 45 kN Porcelain etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing Spiral earth electrode etc., complete with all lead and lift as per direction of Engineer in Charge.

•

EG Stirrup (MS) with GI wire lacing etc., complete with all lead and lift as per direction of Engineer in Charge.

•

DTC: Supply and erection of 11KV/ 433 V, 25 KVA Aluminium Wdg (BEE-4 Star Rated) new Distribution Transformer on Transformer structure including loading with all accessories etc., complete with all le...

•

Supplying and erection of RCC Pole-9 Mtr Long, 145 Kg WL including digging of pit, transportation of pole etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing GI Grounding pipe, B-Class, 42 mm dia, 2.5 m long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg including cost of charcoal and salt packed in ...

•

Providing 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/ Km etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/ Km etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories etc., complete with all lead and...

•

Providing 11 kV Ceramic Pin Insulator (Shell Only) etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing DISC Insulator 45 kN Porcelain etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing 11 kV GI Pin for 11 kV Ceramic Shell Insulator etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing & fixing of 1.1 KV Class HR (Heat Resistant) 50 sqmm PVC Insulated & unsheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 etc., complete with all lead and lift a...

•

Providing LT protection kit as per Dwg No. etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supply of 3-No. of 9kV, 5kA lightening arrestor, metal oxide ceramic type with ground disconnector as per Dwg No. etc., complete with all lead and lift as per direction of Engineer in Charge.

•

LT Metering Box for housing the ETV Meter without CT's busbar wiring etc. etc., complete with all lead and lift as per direction of Engineer in Charge.

•

SMC metering box as above With CT Ratio 50/5 for 15/25 kVA DTC etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Providing & fixing of LT-3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering) etc., complete with all lead and lift a...

•

LT Line: Providing RCC Pole-8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/ GM/ QS&S/05 Dtd 24.11.2018) as per IS-785 etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supply and delivery at site MS LT-4 pin cross arms with clamps, bolts, nuts & washers with braces with all accessories etc. complete and as directed by the Engineer in charge etc., complete with all l...

•

Providing No. 8 strain insulator etc., complete with all lead and lift as per direction of Engineer in Charge.

•

Supply and stringing Weasel ACSR conductors with 1.5% sag with all accessories etc. complete and as directed by the Engineer in charge etc., complete with all lead and lift as per direction of Enginee...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Detailed_Specification1.doc

Others - SPECIFICATIONS • 0.78 MB

KW-1 RESERVED 10924.doc

Tender Document • 1.63 MB

Ready to Participate?

Download all tender documents and submit your bid