PROVN OF CHAIN LINK FENCING AROUND BLDG NO T 28 T 15 T 12 AND T 13 FOR WOMEN MILITARY POLICE AT CANP CENTRE AND SCHOOL AND OTHER SANCTIONED WORKS UNDER GE SOUTH BANGALORE

Amount

Excavation in post holes in soft and loose soil ( or similar holes) each n exc 0.50 cum getting out returning and filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm and removing of surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for cement concrete 1:4;8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F milid steel angle iron 65x65x8 mm thick as in posts and struts in fencing including cutting conforming to Fe 410-0 or Fe-310-0 complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galvanized mild steel wire staple or steel pins complete all as specified and directed. Note : Each line of wire to be measured.

M&L for 6 mm dia round bars cut to length bend to shape required as pince/hooks to fix barded wire complete all as specified and directed.

Preparing of new steel surfaces of any description exc10 cm witdh or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Provn of steel gate 5.5m wide with wicket gate 1.5m wide fabricated with mild steel angle iron framed work with square bars/MS plate etc all as shown on drawing No.HQ CECZ Drg No TD-555 sheet No 3/13, 4/13 & 5/13 complete including RCC columns (03 Nos), with fixing arrangements to RCC coloumns including necessary excavations & earth work, frame work, PCC coping, plastering etc complete all as specified and shown on drawing and as directed. Note : Colour washing to RCC columns & painting to steel items will be measured and paid seperately.

Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in and set in cement mortar (1:4) in vertical surface of walls, columns etc including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. etc complete all as specified and directed.

S&F stainless steel letters of 300mm high, 25mm thick moulded decorative type, pattern as directed, complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth; for foundation etc & getting out in soft/loose soil complete all as specified and directed.

M&Lfor pre-cast cement concrete block masonry of 1:3 :6 Type C1 (using 20mm graded stone aggregate) with solid blocks,exc.10 cm in width and setting in cement mortar1:6, complete all as specified and directed.

M&L for PCC (1:2:4) type B1, using 20mm graded stone aggregates as in coping including necessary formwork complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered/ stopped ends etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:4 and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in manhole covers set in cement mortar 1:4 including necessary form work, complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning, filling in excavated material including spreading levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Excavation in trenches , not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc. and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:2:4 type B0 as in copings,kneelrs.bed plats kerbs, water troughs and like including weathering slightly rounded or champhered in edges including all necessary form work complete all as specified and directed.

M&L for hardcore of gauge n.exc 63mm broken stone or boulders deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:4 over a coat of 10mm thick in CM 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation newly plastered surface of walls and applying three coat of white wash complete all as specified and directed.

Demolition of cement concrete in ground floors & pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layor of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for joint free non skid ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. Set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water, etc as in kitchen platform etc, complete all as specified and directed.

M&L glazed coloured cermaic tiles 350x 250x 7mm/ 450X 350X 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F bib taps 15mm bore, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supplying and laying sub class 'B' bricks locally available best quality, designation 75 for cable protection complete all as specified and directed.

M&L for sand cushning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable and punned to 18cm thick) in trenches for cable protection complete all as specified and directed. Note : Punned thickness only will be measured and paid.

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum,getting out,returning ,filling in and ramming earth or broken rubble mixed with earth around,in layer not exceeding 25 cm, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in copings of poles etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified & directed.

M&L for PCC 1:2:4 type B1 using, 20 mm graded stone aggregate for make good to road surface , hard standing etc complete all as specified and as directed.

Supply, lay, test & commissioning LT UG cable XLPE insulated sheathed and armoured, with aluminium stranded conductor, LT 1100 Volts grade of size 4 core 10 sqmm, complete all as specified and as directed.

S&F GI pipe light grade 40 mm dia for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat including 2 coats of synthetic enamel paint over a coat of primer etc bolt, nut, washer etc. complete all as specified and as directed.

Supply & laying GI pipe medium grade 40 mm dia for cable protection under road/culvert etc complete all as specified and as directed.

Supply and errect steel tubular swaged poles type-410 SP-31, 9.0 meter long complete with cast iron base plate with finial taper plug,bolts,nuts & screws complete all as specified and directed.

S&F thermoplastic cable junction box IP 66 halogen free and weather proof for out door installation( with metric knockouts for cable entry ) of size 167x125x82 mm complete all as specified and directed. Make : HENSEL Cat part no KF5105 or equivalent as approved by GE.

S&F energy efficient LED street light fitting 60 W complete with all fixing arrengements and electric connection, with IP 66 protection suitable for operating voltage 100 to 265 V , alongwith active power factor correction electronic gear and housing pressure die cast alluminium alloy and front toughened glass complete all as specified and as directed. Make :- Wipro Cat part No. LR02-671-XX-57-G2 or eqivalent in CG/Havells/Philips.

S&F energy efficient 10 watts decorative LED extruded aliminiumm bollard complete with all fixing arrengements and electric connection, with IP 66 protection suitable for operating voltage 100 to 265 V, complete all as specified and as directed. Make :- C&S Product code Canis 10W Cat part No. LTGLCW10WLED or eqivelent in CG/Havells/Philips.

S&F post top light lantern fitting 20 watt conical shape opel with spigot made of cast aluminium & wired with all accessories incl LED bulb of 1x 18 watt complete with all fixing arrengement for mounting light on piller with suitable nut bolts incl necessary connection complete all as specified and as directed. Make :- Crompton Cat part No. LPTH-20-CDL eqivalent in Wipro/Philips/Bajaj.

M&L for PVC insulated 2 core 1100 volts grade 1.5 sqmm copper cable including necessary electric connection from junction box to security light/flood light/post top fitting complete all as specified and as directed.

S&F rigid non-metallic PVC conduit 20mm dia ISI marked concealed in piller of gates exclusive of boxes (junction/terminal) but inclusive of all tees,bends,elbows,reducer,bell mouth tube ends complete with saddles and other accessories such as tee,bend,elbow etc. complete all as specified and as directed.

S&F street light control panel confirming to IP 54 protection mounted on wall/pole with suitable MS clamps & nut bolts etc installation and testing including 01 No MCB TPN 32 Amp (Incomer),01 No Contactor 16 Amp 3 Pole , 230V 3P module Analog Time switchc 24 hrs program with curret carrying capacity 16 Amps, terminal blocks,20 Amps bakelite fuse fitting with 2 A HRC fuse,indicaion lamp,mounting lugs,panel lock,hinged door,auto manual delector switch 6 Amp,detachable mounting DIN channel,supply monitoring device complete all as specified and directed. Make :- Indoasian Cat part No. TL032AB0 or eqivalent in Havells /L&T/ABB.

M&L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 5 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed.

RAHUL ENTERPRISES