Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹33.4 L+₹1.6 L (4.92%)Rejected-AOC H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹35.6 L+₹3.7 L (11.7%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹36.0 L+₹4.2 L (13.1%)Rejected-AOC | L4 | Rejected-AOC Other than lowest bidder |
| Sl No | Description | Qty | Unit | R B TRADERS L2 | R. P. Suppliers and Construction Co. L4 | Rajesh Agencies L3 | Ayushmat Contractors L1 |
|---|---|---|---|---|---|---|---|
| .01Schedule 'A' Section - I | |||||||
| 1.00 | Excavation in trenches in hard dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed. | 93 | Cubic Metre | 100 ₹9,300 Lowest | 200 ₹18,600 | 300 ₹27,900 | 175 ₹16,275 |
| 2.00 | Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed. | 78 | Cubic Metre | 15 ₹1,170 Lowest | 50 ₹3,900 | 150 ₹11,700 | 30 ₹2,340 |
| 3.00 | Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed. | 15 | Cubic Metre | 15 ₹225 Lowest | 50 ₹750 | 200 ₹3,000 | 40 ₹600 |
| 4.00 | Dismantling and taking old u/s seamless carbon steel pipe line flanged type 150 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge.
Note:- New pipes shall be laid first at spring area and old ones to be taken out later. | 580 | Running Metre | 70 ₹40,600 | 100 ₹58,000 | 50 ₹29,000 Lowest | 100 ₹58,000 |
| 5.00 | Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.11 mm and weight 28.26 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items.
(ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge.
(iii) Any other expenses including permision from state authorities are included under this item.
Note : Contractor shall produced e-way bill and manufacture test certificate to Engineer-in-charge before claiming of payment. | 580 | Running Metre | 4,200 ₹24,36,000 | 4,000 ₹23,20,000 | 4,200 ₹24,36,000 | 3,000 ₹17,40,000 Lowest |
| 6.00 | Material & labour for MS Flange of ASA-150 standard suitable for 150mm dia bore seamless pipe comprising of inner dia 170.70 mm, outer dia 279.4 mm and thickness 25.00 mm, flange having 8 holes drilled to accomodate bolts of size not less than 19.00mm dia, PCS 241.3 complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed. | 190 | Each | 800 ₹1,52,000 | 1,500 ₹2,85,000 | 1,100 ₹2,09,000 | 750 ₹1,42,500 Lowest |
| 7.00 | Supply and fixing of joint for 150 mm nominal bore pipes, comprising one 5.0 mm thick steel-reinforced compressed asbestos fibre gasket, including 8 Nos M38 nuts and bolts (each bolt not less than 25 mm in diameter and 125 mm in length), and 2 Nos. 5 mm thick washers per joint, suitable for pipes/fittings/bends, complete all as specified and directed by the Engineer-in-Charge. | 100 | Each | 150 ₹15,000 Lowest | 1,000 ₹1,00,000 | 500 ₹50,000 | 1,500 ₹1,50,000 |
| 8.00 | Supply And Fixing in replacement of Air release valve DI Single Chamber, Tripple Action with SS floating And working parts & Fb Expoxy coating in PN1.6 of size 150mm conforming to IS 14845 incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed. | 3 | Each | 10,000 ₹30,000 Lowest | 25,000 ₹75,000 | 30,000 ₹90,000 | 55,350 ₹1,66,050 |
| 9.00 | Supplying, laying, jointing in replacement and testing of Tees, suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. | 10 | Running Metre | 550 ₹5,500 Lowest | 4,000 ₹40,000 | 3,500 ₹35,000 | 1,500 ₹15,000 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
2 Aug 2025, 6:00 pmClosed
Abhishek Prakash, AE EM, Offg Garrison Engineer
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
REPAIR / REPLACEMENT OF WATER PUMPING MAINS OF VARIOUS SIZES AND CONTROL VALVES/CHAMBERS FROM RADIANA PUMP HOUSE TO DAGSHAI UNDER GE KASAULI
2025_MES_717214_1
GEK-21/2025-26
Open Tender
Pipes and Pipe related activities
Item Rate
180 days
DAGSHAI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹76,000
Yes
28 Nov 2025
27 Jun 2025
5 Aug 2025
27 Jun 2025
2 Aug 2025
22 Jul 2025
28 Jun 2025 - 3 Jul 2025
Amount
Schedule 'A' Section - I
Excavation in trenches in hard dense soil n.exc 1.5 mtr wide & n.exc 1.5mtr in depth and n. exc. 10sqm on plan for laying pipe in trenches and getting out complete all as specified and directed.
Returning filling in trenches, spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil complete all as specified and directed.
Removing of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.
Dismantling and taking old u/s seamless carbon steel pipe line flanged type 150 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later.
Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.11 mm and weight 28.26 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. (iii) Any other expenses including permision from state authorities are included under this item. Note : Contractor shall produced e-way bill and manufacture test certificate to Engineer-in-charge before claiming of payment.
Material & labour for MS Flange of ASA-150 standard suitable for 150mm dia bore seamless pipe comprising of inner dia 170.70 mm, outer dia 279.4 mm and thickness 25.00 mm, flange having 8 holes drilled to accomodate bolts of size not less than 19.00mm dia, PCS 241.3 complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed.
Supply and fixing of joint for 150 mm nominal bore pipes, comprising one 5.0 mm thick steel-reinforced compressed asbestos fibre gasket, including 8 Nos M38 nuts and bolts (each bolt not less than 25 mm in diameter and 125 mm in length), and 2 Nos. 5 mm thick washers per joint, suitable for pipes/fittings/bends, complete all as specified and directed by the Engineer-in-Charge.
Supply And Fixing in replacement of Air release valve DI Single Chamber, Tripple Action with SS floating And working parts & Fb Expoxy coating in PN1.6 of size 150mm conforming to IS 14845 incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed.
Supplying, laying, jointing in replacement and testing of Tees, suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.22 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge.
Supplying, laying, jointing in replacement of Seamless bend (90 Degree, 45 degree, 60 degree), suitable length and as per site requirement, made of hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 164.2 mm, with nominal wall thickness 7.1 mm and weight 28.2 Kg/ Rm, including short pieces with flanged ends duly fabricated as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge.
Supply & fixing in replacement rubber fiber washers of 3mm thickness for water mains of size 150mm dia nominal size pipes comprising of suitable holes for attachment, complete all as specified and directed by Engr-in-Charge.
Supply & Fixing in replacement and testing of high pressure, heavy duty cast steel sluice valve, nominal size 150mm, conforming to API 600, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected by Engr-in-charge. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item.
Supply & Fixing in replacement and testing of high pressure, heavy duty type cast steel Non Return,valve/ check valve, nominal size 150mm, PN 25 conforming to BS 1868, classs 600, Suitable to hydrostatic test pressure for body 156 KG /sq cm & for seat 115kg/cm, both ends flanged in existing line, after removal of old unservicable gate valve without damaging to exting pipe line complete all as specified and diected by Engr-in-charge. NOTE:- Suitable size MS Flange for exiting pipe line, joints and joining materials shall be including under this item
Material & labour for Cutting down leaking piece of pipe 150 mm. Cut down the rusted & leaking portion , providing:- (i) new piece of MS Pipe of 150 mm upto 0.50 metre long. (ii) New union socket 150 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New MS pipe 150 mm upto 0.50 metre length (c) union & socket 150mm - 1 Nos each. (d) welding etc complete including testing on complete.
Material & labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate for anchorage blocks for pipe line/making good the cut portion of roads/paths/hard standings etc including necessary from work where required , to support the pipe line complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing in replacement of sluice Valve PN1.6 Epoxy coated with ssp & HW size 150mm incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed.
Material & labour for Construction of brick masonary pit of size 160x120x120 Cm internal size with MS Sheet 3MM Thick and angle iron frame of size 40x40x6mm duly painted with 2 cots of synthetic enamel paint over a coat of red oxide primer including locking arrangement with lock with 3 keys, lifting handle and includng excavation / earth work, PCC in foundation, brick work , plaster including demolaton of existing pit complete all as specified and directed by Engr- in-Charge.
Material & labour for Construction of brick masonary pit of size 120x120x90 Cm internal size with MS Sheet 3MM Thick and angle iron frame of size 40x40x6mm duly painted with 2 cots of synthetic enamel paint over a coat of red oxide primer including locking arrangement with lock with 3 keys, lifting handle and includng excavation / earth work, PCC in foundation, brick work , plaster including demolaton of existing pit complete all as specified and directed by Engr- in-Charge.
Amount of credit of Rs. 242342.50 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
R B TRADERS (BID ID -3372975)
Rajesh Agencies (BID ID -3376354)
R. P. Suppliers and Construction Co. (BID ID -3375939)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .