Certain repair to drain, gates fencing, garbage bin, boundary wall etc in Offr Md Accn, MH, Fd Amb, santan Singh enclave, JSI auditorium and surrounding area under AGE B/R-II, GE Gurdaspur.

Amount

M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface.

Excavating in trenches n. exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shaft, cesspits, manholes etc. not exc. 10 sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concete complete all as specified and directed.

Dismantling of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (old size), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per Srl item No 05 above but except bricks. (old dismantled serviceable bricks obtained from Srl item No 04 above shall be reused after necessary cleaning of mortar).

S&F mild steel angle iron work as in fencing post and struts including cutting tops to shape as directed drilling holes notching for wire conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for plain cement concrete (1:3:6), type C-2 for post holes (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) as in coping/ band and bed block etc incl necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply only 3.15mm dia PVC coated galvanised mild steel chain link fencing of mesh size 75mm x 75mm mesh fixed with string bolts complete all as specified and directed.

Fixing only 3.15 mm dia, PVC chain link fencing 75 mm x 75 mm mesh, fixed to RCC fencing post with bolts etc including fixing of binding wire / line wire etc complete all as specified and directed. Note :- (a) Supply of Galvanized steel wire chain link fecncing, Mild steel round bars, Mild steel flat, Nuts, Bolts & Washers will be measured and paid separately.

Supply only mild steel round bars 10 mm dia, Fe- 290, Grade E-165, cut to length, bend to shape required and hooking ends for fixing to chain link fencing complete all as specified.

S&F mild screw bolts diameter of neck 5 to 10mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut ,exc 10 but n. exc 15cm long complete all as specified and directed.

M&L for two coats of synthetic enamel painting on new steel surfaces of any description over 10cm in width or girth not otherwise described over a priming coat of red oxide including prepration of surfaces complete all as specified and directed.

Material and labour for rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surface in walls, complete all as specified and as directed.

M&L for prepration of newly plastered/ unplastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25cm in soft/loose.

Removing excavated material soils n. exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point.

Dismantling posts or struts (RCC) any section including taking out embedded portion and making good disturbed ground, embedded in natural ground, complete all as specified and directed.

All as per Srl item No 19 above but embedded in concrete, brick work etc.

Dismantling fencing wire mesh any type including rods, bolts complete all as directed.

Material and labour for plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base for paver block paving to raise level complete all as specified and directed

Material and labour for sand filling under floors or in paving or in foundations including watering and consolidation complete all as specified. Note:- Punned down thickness shall be measured.

M&L for dismantling of existing tiles and 60 mm thick PCC (M-35) factory made with grey cement and pigment interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand, complete all as specified and as directed by Engr-in-Charge. Note Sand will be paid under relavent item.

M&L for machine pressed kerb stone with PCC (1:2:4) type B-1 using 20mm graded stone aggregates as in cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs stones, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L for adequate No of coats for painting on kerb stone lines , dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as spcd and directed

M&L for one coat Painting lines on old surface of kerb stones dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as spcd and directed

M&L for dismantling of existing coloured chequered cement concrete tiles with grey cement and pigment , 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling wrought iron and mild steel work of any description complete all as specified

S&F Rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Gde Fe-290 Gde E 165

Supply and fixed welded steel wire fabric n exc 4 kg per Sqm complete to wood or steel memmber complete all as specified and directed

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of surfaces

M& L for light coloured vitrified tiles10 mm thick joint free (square/ rectangular) area of each tile exc 0.36 sqm but not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 20 mm thick screed bed in CM 1:6 and dismantling of existing tile complete all as specified.

S&F glazed ceramic coloured tiles thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. 300x200x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface incl dismantling of existing tiles complete all as specified and directed.

M&L reinforced concrete drain pipes NP3, 200mm bore include for laying pipes level or to falls In trenches, on concrete bed and all necessary extra joints, waste and cutting as jointed complete with collars incl demolition and breaking up 200 mm drain pipes (SGSW/AC/reinforced concrete) set in cement mortar and taking out from trenches as specified and directed.

M&L for 15cm PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as concrete bed, width of concrete bedding shall extend laterally 15 cm beyond either side of the outer dia of pipe laid to falls in trenches in any depth including packing under, and haunching against the sides of SGSW/ reinforced concrete drain pipes NP3 200mm bore, after the pipes have been laid and tested include for any necessary shuttering and supports to concrete and for laying beds to falls complete all as specified and directed.

M & L for Providing precast cement concrete type B0 1:2:4( 12.5 mm graded aggregate) louvres and jallies, 25mm thick (measured solid),including all mould- ings and set in mortar CM 1:4 all as specified & directed

Material and Labour cement concrete 1:3:6 type C-2, using 40 graded stone aggregate, as in surface channel and drain and similar complete all as specified and directed.

M&L for Providing cement concrete type B-1 1:2:4 (using 20mm graded stone aggregates) in coping and similar works complete all as specified and directed.

Material and labour for joints grouted and pointed flush in CM 1:3 with raking out joints, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar

M&L Granite (of any type) work (table rubbed and polished ) 20 mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including dismantling of existing work complete all as specified and directed.

S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and directed

S&F of Rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in Roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (Beam, tee, angle, Coulmn, Gusset Plates, channel, Hollow square/Rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engr-In-Charge.

Dismantling framed work timber scantlings 40sqcm and over in section, in any position complete all as specified and directed.

Taking down existing u/s iron door/shutter of any type any size and refixing the same in situ after necessary welding work, oiling and greasing, replacement of unserviceable iron section, realignment , checking and made functional / operate able all moving parts to the entire satisfaction of the engineer in charge complete all as specified. (Note :- (i) Iron section shall be measured & paid separately as supply only under appropriate item. (ii) Rates are deemed to inclusive of all civil works required for refixing and making good the disturbed surfaces).

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified & directed.

S & F for stainless steel heavy duty chain (Grade 304) with 8 mm snap hook complete all as specified & directed.

A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

GORAYA AND CO (BID ID -3057314)

AAR KAY BEE ENTERPRISES (BID ID -3057527)