Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical HOUSE NO 1063 WARD NO 1 VILLAGE SEWAH PIN CODE 132108 | SEWAH | PANIPAT | HARYANA | 132108 | Admitted-Fee/PreQual/Technical |
Tender Value
₹1.6 L
EMD Value
₹3,265
Closing Date
8 Oct 2026, 3:00 pmClosed
Registrar
DLCSUPVA
Providing and fixing aluminium partitions in Consultant Office of FFTV Department, DLCSUPVA, Rohtak
2026_HRY_551440_1
2026/AlumPartFTV2ndCall
Open Tender
Civil Works
Tender
30 days
DLCSUPVA
Providing and fixing aluminium partitions in Consultant Office of FFTV Department, DLCSUPVA, Rohtak
2 documents required · 2 mandatory
₹1,000
Yes
₹3,265
Yes
8 Oct 2026
1 Oct 2026
8 Oct 2026
1 Oct 2026
8 Oct 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | HSR 12.157.1.3: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately):- Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron). Make: Jindal, Hindalco, Indalco, Omalco | 309.7 | Kg | 358.09 | ₹1,10,900.47 |
| 2 | HSR 12.158.1:- Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge: - Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 37.31 | Sqm | 746.55 | ₹27,853.78 |
| 3 | HSR 12.159.2: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item): - With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 15.46 | Sqm | 923.36 | ₹14,275.15 |
| 4 | HSR 5.45: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 15.6 | Sqm | 33.04 | ₹515.42 |
| 5 | NS Item: - Providing and fixing Frosted Glass Film. Make- Elecsa, 3M, IBT, Crystal, Asian | 176 | Sft | 55.08 | ₹9,694.08 |
stage.html
html • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_631253.xls
BOQ • 0.27 MB
AlumPartFFTVTndrDoc.pdf
Additional Documents • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .