Retrofitting and improvement of LWSS Dharmana in Tehsil Ramshehar District Solan H) Sub Head Repair of pump house laying jointing testing and commissioning of GMS pipe of various dia and providing and installation of house service connection 51 Nos

Amount

Demolition above G.L upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 20 metres lead and including the necessary reinforcement and separating from RCC work.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling upto all height and removal of the same for insitu-reinforced concrete and plain concrete work in :-

Flat surface such as soffits of suspended floors, roofs,landing and the like floor etc.upto 200mm in thickness.including carriage of material with in all leads and lifts .

Providing and laying cement concrete work 1:2:4( 1 cement :2 sand :4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Suspended floor roofs, landing, shelves and their supports balconies beams, girders, bressumers and cantilevers upto two level all floor level in all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-charge.

Placing of Tor steel reinforcement for RCC work I/c bending ,binding and placing in position complete upto floor two level.( Labour rate) in all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-charge.

15mm thick cement plaster in single coat on rough side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:4 (1 cement :4 sand) and curing complete.

White washing with lime on undecorated wall surface(two coat) to give an even shade i/c throughly brooming the surface to remove all dirt,dust,mortar dirt and other foreign matter. i/c entire carriage of material upto all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surface( two coats) to give an even hade after thoroughly brushing the surface to remove all dirt, loose or softened paint.

Appling priming coat over over new steel and other metal surfaces after and including preparing the surface by throughly cleaning oil grease dirts, and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed paint brushing red led -oxide /zinc oxide chrome with all leads and lifts.

Painting two coats(excluding priming coat) on new steel work based surfaces,with ready mixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter,sand papering and stopping,with paint other than white.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jump lock jamb, beed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamp including steel but hinges 2.5mm thick with guards, lock strike plate and shock as specified and applying a coat of steel primer after pretreatment or surface as directed by Engineer- in - charge.

Profile -- A

Providing and fixing 1 mm thick MS sheet door with frame of 40 mmX 40 mmX 6 mm angle iron 3.15 mm M.S . Gusset plate at the junctions and corners including all necessary fittings, complete including applying a priming coat of red lead paint using flat 30 mmX 6mm for diagonal braces and control cross/ pieces.

Cement concrete flooring 1:2:4( 1 cement : 2 sand :4 graded stone aggregate 20 mm nominal size laid in one layer finished with a floating coat of neat cement 40 mm thick excluding cost of cement in all lead and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm i/c filling the joints with approved adhesive complete in all respect of 100 mm dia.

Providing plinth protection 50mm thick in cement concrete 1:3:6 ( 1 Cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) including finishing the surface of concrete smooth as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (1 cement :6 sand :12 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all lead and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 (1 cement :3 sand :6 graded stone agg.20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all lead and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S fan clamp type-I of 16mm dia M.S bar bent to shape with hooked ends in RCC during laying including printing the expossed portion of loop, all as per standard design complete.

P/F anodizd aluminium sliding door bolt anodized color and shade with bolt and nut srews etc complete of 300x16mm

P/F anodized aluminium tower bolt (barrel type ) anodized transparent or dyed to required shade and clour with necessary screws etc complete 250mmx10mm.

P/F of handles aluminum anodized transparent or dryed to required color of shade with necessary screws etc complete in all respects100 mm.

P/F MS grills of required pattern in wooden frames/pressed steel frame with M.S.flat square/round bars 12mm dia with round headed bolts and nuts or by screws Plain grill. i/c entire carriage of material upto all leads and lifts.

Excavation in drains and channels etc. in all kinds of soil such as pick work, jumper work, blasting, soft and hard rock and through conglomerate rock upto all lelads and lifts stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in trenches consolidatig each deposited layers by ramming and watering and then disposing of all surlus excavated material within all leads and lifts and like as directed by the Engineer-in-Charge including jungle clearance.

Laying, jointing and testing in trenches galvanised mild steel tube of Light grade complete including providing and fixing tube fitting such as union, tees, socket etc (excluding cost of bends and valves) for the following dia as per direction and to the entire satisfaction of Engineer-in-charge.

20 mm dia (Light grade)

25 mm dia (Light grade)

32 mm dia (Light grade)

Providing and fixing Gun Metal wheel valve of following dia screwed type as per ISI.778-ISI. Marked complete in all respect as per direction and to the entire satisfactioln of Engineer-in-Charge..

20 mm dia

25 mm dia

32 mm dia

Providing and Installation of house connections with 15 mm dia G.I. pipe (Light class ) including G.I. union 15 mm dia,G.I. Ferule 15 mm dia,G.I. Elbow 15 mm dia ,G.I. Socket 15 mm dia ,G.I. Tee 15x15 mm dia & 15 mm dia brass bib tap .(Excavation in trenches to be measured and paid for seprately and the GMS pipe will be issued free of cost from IPH store Nalagarh

NARAYAN SINGH

SURAT RAM D CLASS GOVT CONTRACTOR

SHANKAR LAL

SUKH RAM

RAM ASRA GOVT CONTARCTOR

AMAR SINGH GOVT CONTRACTOR

VIKAS CHAND GOVT CONT