REPAIR TO DRAINS, PATH, SEWAGE LINE AND HARD STANDING AT NORTH ZONE AREA INCLUDING PERIODICAL SERVICES AT RLT/GM VIHAR UNDER GE (NORTH) AKHNOOR

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, culverts,etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc all as directed

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified.

Description all as per item No 2 above but except bricks.

Taking down cement plaster of any description on stone or brick walls etc. including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

15mm thick cement plaster rendering in CM 1:4 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified.

100mm thick Plain Cement concrete Type D-2, 1:4:8 (using 40mm graded crushed aggregate) as in sub-base of floors, path/hardstandings etc, finished even and rough to receive topping layer complete all as specified.

100mm thick Plain Cement concrete Type B-2, 1:2:4 (using 40mm graded crushed aggregate) as in floors, pavings & hardstandings etc laid in alternate panel, finished even and smooth without using extra cement, complete all as specified.

25 mm thick sand filling under floors or in foundation including watering and consolidation for laying inter locking tiles, complete all as specified.

Machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 60 mm thick, M-35 grade , in paths and hardstanding,with grey cement and pigment, laid tightly over and joints filled with dry sand. (Colour and pattern as approved by GE) complete all as specified and directed. Note:-Sand cushioning shall be measured & paid seperately under relevant item.

Machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 80 mm thick, M-40 grade , in paths and hardstanding,with grey cement and pigment, laid tightly over and joints filled with dry sand. (Colour and pattern as approved by GE) complete all as specified and directed.

Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) for protecting interlocking tiles rounded or chamfered on edges complete all as specified and directed.

Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Providing and applying Wall care putty of 1 mm thickness over plastered / old existing surface to prepare the surface even and smooth, complete all as specified and as directed.

Preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper on walls incl one coat of approved primer, complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coat of cement based paint on walls incl one coat of cement primer all as specified.

Preparation of newly plastered surfaces of ceiling and applying two coat of white wash incl one coat of approved primer, complete all as specified.

Complete removal of exising treated old surfaces and apply two coat of oil bound distemper to walls, complete all as specified.

Preparation of old decorated surfaces of wall and applying one coat of oil bound distemper on walls all as specified and directed by Engr-in-Charge .

Preparation of old treated surfaces of wall and applying two coat of oil bound distemper on walls, complete all as specified.

Preparaing old surface (plastered or unplastered) surfaces of ceilings including filling small depressions by putty , washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of white wash on ceilings, complete all as specified and as directed by Engineer-in-charge

Preparation of old decorated surfaces including brooming down or steel wire brushing, scraping down smoke soot, moulds,moss and efforescent salts and removing oil and greasy spots and applying one coat of cement base paint on walls all as specified and directed by Engr-in-Charge.

Preparation of old painted steel surfaces of any description exc 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of old painted wooden surfaces of any description exc 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of old treated surfaces of walls (plastered or unplastered) and applying one coats of Apex emulsion paint as in roof projection/chajjas complete all as specified and directed.

Writing letters or figures ( Block , Roman, Italic or Indian ) n exc 30 cm high complete all as specified.

Ankush Gupta

KRISHNA BUILDERS

CHOPRA CONSTRUCTIONS

M/S KARAN SINGH CONTRACTOR

Mohd Rafiq and Co