ATTENDING DAY TO DAY COMPLAINTS, REPAIRS TO SEEPAGE/LEAKAGE, REPAIRS TO PARAPET WALL, REPAIRS TO PLASTER AND PERIODICAL SERVICES AT DUNDAHERA MIL STN, MANESAR ARMY CAMP, INDU BINOLA UNDER AGE B/R (P) MC OF GE (SOUTH) DELHI CANTT-10

Amount

Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pillar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water Supply Repair/ replacement to leaking flushing cistern low/ high level, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water Supply available upto water taps incl attending the complaints of no water Supply.repair to PVC bend, pipe etc. complete all as specified and as directed.

Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, dressing table, pelmets, plate rack incl Aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc. complete all as specified and as directed.

M&L for cleaning of all blockages of Nahni traps/ floor traps/ bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/ waste pipe stacks, CI Tee/ door bends etc & cleaning of drain pipes 150mm to 250mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/ Cantt board), and maintain internal & external sewage system in functional state at all the time with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25cm thick layer of soil. complete all as specified and as directed.

Notes for Srl item Nos.1 to 3:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate numbers of tradesmen (i.e Plumber/Carpenter/Safaiwala) as applicable with all necessary T&P on all working days from 08:30 AM to 5:00 PM at Dundahera Military Station Complaint Cell. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of plumber on any working days. 4. The contractor will ensure that the team of Plumber/Carpenter/Safaiwal with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill. 7. The rate quoted by the tenderer for these items are also included utilizing these manpower for taking down of unsv items and fixing of new items which are catered as "Supply only" here-in-after. However these manpower/tradesmen shall not be utilized for other than supply only items.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 15mm thick screed bed in CM 1:6 to match complete all as specified and as directed.

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 15mm thick screed bed in CM 1:6 to match complete all as specified and as directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement laid over and including 10mm thick rendering in CM 1:4 as backing layer to match complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re-fixing, or removing to store of 15 mm bore of pipe complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply only in replacement PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and as directed.

S&F in repairs waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs 15 mm angle valve/ stop valves, cast copper alloy, chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and as directed.

S&F in repairs Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed.

S&F in repairs chromium plated grating with 100mm dia of approved make including fixing with 1:4 CM to floor/ nahni trap etc. complete all as specified and as directed.

S&F in repairs replacement grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc. complete all as specified and as directed.

S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repairs brass chromium plated health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs stainless steel sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/ steel windows complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9 mm, complete all as specified and as directed.

S&F in repairs aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repairs MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc. complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and as directed.

S&F in repairs aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc. complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc. complete all as specified and as directed.

S&F in repairs door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section complete all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP complete all as specified and as directed.

Supply only in replacement PVC handle for low level flushing cistern of any capacity complete all as specified and as directed. Make : Prayag/ Hindware/ Parryware

Supply only in replacement Flushing kit complete (containing handle, float valve, syphon washer, PVC nut etc. complete set) for low level flushing cistern complete all as specified and as directed.

Supply only PVC washer for syphon i.e. of low level flushing cistern of any capacity 15 mm bore.

Supply only PVC washer for syphon i.e. of low level flushing cistern of any capacity 20 mm bore.

Supply only GI socket 15 mm dia.

Supply only GI socket 20 mm dia.

Supply only Elbow GI 15mm dia.

Supply only Elbow GI 20mm dia.

Supply only Elbow Reducer GI 15 x 20mm dia.

Supply only Elbow Reducer GI 15 x 25mm dia.

Supply only Nipple GI 15 x 100mm long.

Supply only Nipple GI 20 x 100mm long.

Supply only Nipple GI 15 x 50mm long.

Supply only Nipple GI 20 x 50mm long.

Supply only Nipple GI running 15mm x 75mm long.

Supply only Tee GI equal 15mm dia.

Supply only Tee GI equal 20mm dia.

Supply only Tee Reducing G.I 15 x 20 mm dia.

Supply only Tee Reducing G.I 15 x 25 mm dia.

Supply only Tank nipple 15/20 mm dia.

Supply only Union G.I 20 mm dia.

Supply only GI plug 15mm.

Supply only GI plug 20mm.

Supply only Socket reducer 15x20 mm dia.

Supply only Sprindal (face) full turn/ half turn of any number

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 10mm thick rendering with ready mix plaster on concrete surfaces of ceiling, chajja,etc finished even and smooth complete all as specified and as directed. Notes :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.

M&L for preparation of newly plastered surfaces of ceiling and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface with a coat of chalk whiting primer to receive distemper complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and filling of holes with filler material and applying 1 to 2 mm thick wall care putty in two layers on whole wall surface including grinding with sand paper and levelling the surface and than applying a coat of oil bound distemper on white or tinted surface over existing prepared putty based surface complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment from external surfaces of wall by electrically operated grinder thereafter filling of holes and cracks with filler material and than applying one coat of cement based paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brick with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface is to be finished even and smooth ( without using extra cement of lime) in CM 1:6 complete all as specified and as directed.

M&L for resecuring, easing and adjusting with out taking down of Shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and as directed.

Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc. complete all as specified and as directed.

Demolition of cement concrete in of any description and in any position complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate, of thickness 40mm, as in roof padding alongwith liquid water proffing compound complete all as specified and as directed. Note:- Liquid water proofing compound shall be paid and measured seperately.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in roof kerbs or mud stop rounded or chamfered on edge etc. complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and as directed.

All as per Srl item No.80 above, but exceeding 500 litres but and not exceeding 1000 litres complete all as specified and as directed.

S&F 500 ltr capacity tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

All as per Srl item No.82 above, but 1000 litres capacity complete all as specified and as directed.

S&F in repairs ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20/25 mm bore and fixed complete all as specified and as directed.

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and as directed.

Demolition of reinforcement cement concrete of any discription and in any position, including cutting of reinforcement from adjoining RCC component to faciliate demolition complete all as specified and as directed.

M&L for RCC 1:2:4, type B-0, using 12.50 mm graded stone aggregate (Nominal Mix) as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed.

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including muld seel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per Srl item No.88 above, but 5mm dia and over upto and including 10mm dia in stirrups complete all as specified and as directed.

M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc. vertical or to batter complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed. Notes :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for chipping of spelled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhesive on complete exposed surfaces of concrete and provide gunniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :2 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding , shuttering necessary chased to brick work or RCC members at any height upto full height of buildings including removing of small trees shrubs etc complete all as specified and as directed. Note:- Steel mesh to be welded with the existing reinforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.

Taking up or down steel tubing and connections including cleaning for re-fixing, 20 mm bore of pipe, complete all as specified and directed by engineer-in-charge.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete complete all as specified and as directed.

S&F stainless steel barrel tower bolts, 150 mm long complete all as specified and as directed.

S&F stainless steel handles, 150 mm long complete all as specified and as directed.

Providing and fixing in repair of factory made Fibreglass Reinforced Plastics (FRP) Chajjas of 450mm wide and 4mm thick of Fibrewasys or equivalent in required colour, size, design made by RTM machine technology, resulting in void free compact laminate in single piece, having smooth graddual slope curvature for easy drainage of water and duly reinforced by 2 nos, vertically and 1 nos horizontally 50X2mm thick MS flat with 12mm in built hole for grouting on the existing walll along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings.The FRP chajja should be manufactured using unsaturated polyster resin as per IS-6746 duly reinforced with fibreglass chopped strand mat (CSM) as per IS-11551 complete with protective Gelcot U/V coating on top for complete resistance from the extreme of temperature, weather and sunlight complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

Chaudhary Constructions

SABHARWAL CONSTRUCTION CO.

M/S Parmod Johar