Work of widening and strengthening of Kallanhedi Bhattpura road via Chirau from service road.

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m Ref. to MoRTH Spec. 301 complete in all respects but excluding GST.

Construction of Embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 complete in all respects but excluding GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. complete in all respects but excluding GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. complete in all respects but excluding GST.

Providing laying spereading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per MORTH clause 406 complete in all respects but excluding GST.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. MoRTH specification clause No. 502 complete in all respects but excluding GST

Providing and laying dense graded bituminous macadam (Grade-2) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects but excluding GST

Providing and applying tack coat with Bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MoRTH specification clause No. 503 complete in all respects but excluding GST

Providing and laying bituminous cocnrete (Grade-2) with 100-120 TPH batch type HMP producing and average output of 75 Tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver fixisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificiation clause No. 507(B) complete in all respects but excluding GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. complete in all respects but excluding GST

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. M-20. complete in all respects but excluding GST

Plain/Reinforced Cement Concrete Grade M-25 in Open Foundation complete as per Drawing and Technical Specifications. complete in all respects but excluding GST

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. complete in all respects but excluding GST

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications

Construction of of NP-3 class 350 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Construction of of NP-3 class 600 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Construction of of NP-3 class 1000 mm dia RCC hume pipe culvert (ISI mark) of following diameters including carriage, loading, unloading at site also including cost of hume pipes & collars & all taxes including laying in proper position & joint filling including cost of necessary jute & cement for proper completion of the work complete in all respects but excluding GST

Pointing with cement mortar (1:3 ) on brick work in substructure as per MORT&H Specifications No. 1300& 2200. complete in all respects but excluding GST

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications. complete in all respects but excluding GST

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. M-15 complete in all respects but excluding GST

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres A. Dismantling Brick / Tile work/ rubble masonary/ pitching/ etc. complete in all respects but excluding GST

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres B. Prestressed / reinforced cement concrete grade M-20 & above. complete in all respects but excluding GST

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. complete in all respects but excluding GST

Providing and laying Filter material Graded stone aggregate of required size underneath pitching in slopes complete as per drawing and Technical specification. complete in all respects but excluding GST

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. complete in all respects but excluding GST

Construction of un-reinforced, without dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, including recron fibre, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. complete in all respects but excluding GST

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. Ch. 04 S.I. No. 05

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc. Ordinary kilometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

Reinforced cement concrete M15 grade Hectometre stone of standard design as per IRC:8, fixing in position including painting and printing etc.Hectometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

RADHEY SHYAM SINGH (BID ID -5748427)