Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-AOC H B ROAD NEAR LAHPUR THANA RANCHI | RANCHI | RANCHI | JHARKHAND | 834002 | ₹42.4 L Quoted ₹43.8 L | L1 | Accepted-AOC Lowest Bid |
| 2 | L2₹45.1 L+₹1.3 L (2.85%)Rejected-Finance DANGRA TOLI CHOWK PURULIA ROAD RANCHI | RANCHI | ₹45.1 L+₹1.3 L (2.85%) | L2 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Blaca Corporations H1 | RANCHI ELECTRICALS H2 |
|---|---|---|---|---|---|
| 1.01 | Supplying, Installation, testing and commissioning of water lubricated single or multistage, Radial/Mixed flow Vertical turbine pump(make-Kirloskar /Jyoti/WPIL / WILO Mather & platt) having discharge of 70 m³/hr against a total head of 72 meters consisting of pump bowl assemblies with dynamically balanced bronze impeller , stainless steel pump shaft , S.S. line shaft 1.5 mtr length each , 60 feet MS fabricated flanged type column assembly , strainer, non- reverse rachet coupling and discharge head etc. coupled with suitable Vertical hollow/solid shaft -IE3 energy efficient SPDP Squirrel cage induction motor (Kirloskar/ Jyoti/ CGL make) confirming to IS 12615:2011 with latest amendments having 10% more BHP than that of Pump operating on 3-PH, 50Hz, 415 ± 10%, 1450-1500 rpm with required size of ISI marked heavy duty CIDF sluice valve & CIDF NR valve , Pressure gauge, MS clamp including cost of construction of new foundation with suitable size of nut ,bolts and packings etc. all complete or as per site requirement or direction of E/I. | 2 | set | 17,50,000 ₹35,00,000 | 16,98,196 ₹33,96,392 Lowest |
| 1.02 | supplying, Installation, testing & commissioning of free-standing type floor mounted cubical LT motor control panel fabricated with MS sheet of suitable gauge and size duly painted with two coats of red oxide primer comprising of 200 Amp, 440V copper busbar arrangement 4 pole consisting of following accessories:
(i) 200 Amp MCCB – 1 No. (Incoming feeder)
(ii) 100 Amp MCCB – 02Nos (outgoing feeder).
(iii) 100 Amp MCCB – 01No. (As spare)
(iv) 32 Amp MCB -1 No. for lighting load and other utility load.
(v)Fully Automatic Star Delta (FASD) Starter (L&K/Havells/Siemens’ /Schneider/BCH make) suitable for Above pump set or more etc.- 2 Nos.
(vi) 3-phase Digital display Voltmeter & Amp Meter -2 Sets, Phase indicating light R-Y-B -3 Nos.
(vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Single phase preventor, Dry run protection, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant. | 1 | Job | 4,15,000 ₹4,15,000 Lowest | 4,15,938 ₹4,15,938 |
| 1.03 | Making and fitting of MS Common Header 200mm Dia with suitable size Blind flange for both ends of MS Common Header. | 1 | Job | 60,000 ₹60,000 | 53,512 ₹53,512 Lowest |
| 1.04 | Supplying and laying of 3.5 core 95 sq.mm aluminum armored cable from transformer to MCP (Motor Control Panel). with suitable copper thumble socket etc. | 100 | Metres | 1,300 ₹1,30,000 Lowest | 1,301 ₹1,30,100 |
| 1.05 | Supplying and laying of 25 sq. mm x 3 core X 1.1 KV grade with ISI mark XLPE/PVC insulated and unarmored flexible copper Cable from MCP to motor terminal box with suitable copper thumble socket etc. | 45 | meters | 3,500 ₹1,57,500 Lowest | 3,512 ₹1,58,040 |
| 1.06 | Breaking of Old PCC foundation and removing of all residuals from pump house to outside with lead of 200m with all tools and tackles Complete, and lifting of old 20HP VT pump set with column pipes, line shafts from intake well including all labors, tools and tackles etc. all complete. | 2 | job | 45,000 ₹90,000 | 41,594 ₹83,188 Lowest |
| 1.07 | Chemical earthing 3 meters and 80mm hole size with electrode and chemical compound etc. with watering pipe and locking arrangements including soldering, riveting, jointing G.I. flat strip 50mm X 6mm to all equipment or as per direction of E/I | 2 | job | 16,500 ₹33,000 Lowest | 16,626 ₹33,252 |
| 1.08 | Supplying and fitting of lightening arrester suitable for building protection with Earthing Electrode, Earthing Compound, copper wires and earth work etc. all complete job or as per direction of E/I. | 1 | job | 55,000 ₹55,000 | 53,512 ₹53,512 Lowest |
| 1.09 | Supplying and fitting of 90watt LED street lighting luminaire with pressure die cast housing and toughened glass cover, operating voltage range 100V-270V AC with structure, stand, clamp, tee, wires and switches etc. all complete | 1 | No | 10,000 ₹10,000 | 9,046 ₹9,046 Lowest |
| 1.10 | Supplying and fitting of 415volt S-D-F FN 200 Ampere TPN main switch and SS enclosure suitable for DIN Fuse link with HRC fuses make L&K/ Havells/C&S with all Labor & tools and materials installing at pump house | 1 | set | 25,000 ₹25,000 | 17,817 ₹17,817 Lowest |
Tender Value
₹43.8 L
EMD Value
₹87,700
Closing Date
6 Aug 2026, 3:00 pmClosed
EE, D.W and S. Mechanical Division Jamshedpur
Office of the EE, D.W and S. Mechanical Division Jamshedpur
Supplying, Installation, Testing and Commissioning of VT Pump Set at Raw Water Pumping Plant For Bhalki Having Discharge - 70 m3 per hour And Head - 72m with all required electro Mechanical accessories for Bhalki and adjoining Villages RWSS
2026_DWSD_116631_1
08/26-27 Group A
Open Tender
Pumps/Motors
Item Rate
60 days
Jamshedpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
₹87,700
12 Sept 2026
29 Jul 2026
7 Aug 2026
29 Jul 2026
6 Aug 2026
29 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Supplying, Installation, testing and commissioning of water lubricated single or multistage, Radial/Mixed flow Vertical turbine pump(make-Kirloskar /Jyoti/WPIL / WILO Mather & platt) having discharge of 70 m³/hr against a total head of 72 meters consisting of pump bowl assemblies with dynamically balanced bronze impeller , stainless steel pump shaft , S.S. line shaft 1.5 mtr length each , 60 feet MS fabricated flanged type column assembly , strainer, non- reverse rachet coupling and discharge head etc. coupled with suitable Vertical hollow/solid shaft -IE3 energy efficient SPDP Squirrel cage induction motor (Kirloskar/ Jyoti/ CGL make) confirming to IS 12615:2011 with latest amendments having 10% more BHP than that of Pump operating on 3-PH, 50Hz, 415 ± 10%, 1450-1500 rpm with required size of ISI marked heavy duty CIDF sluice valve & CIDF NR valve , Pressure gauge, MS clamp including cost of construction of new foundation with suitable size of nut ,bolts and packings etc. all complete or as per site requirement or direction of E/I. | - | set | - | - |
| 1.02 | supplying, Installation, testing & commissioning of free-standing type floor mounted cubical LT motor control panel fabricated with MS sheet of suitable gauge and size duly painted with two coats of red oxide primer comprising of 200 Amp, 440V copper busbar arrangement 4 pole consisting of following accessories:
(i) 200 Amp MCCB – 1 No. (Incoming feeder)
(ii) 100 Amp MCCB – 02Nos (outgoing feeder).
(iii) 100 Amp MCCB – 01No. (As spare)
(iv) 32 Amp MCB -1 No. for lighting load and other utility load.
(v)Fully Automatic Star Delta (FASD) Starter (L&K/Havells/Siemens’ /Schneider/BCH make) suitable for Above pump set or more etc.- 2 Nos.
(vi) 3-phase Digital display Voltmeter & Amp Meter -2 Sets, Phase indicating light R-Y-B -3 Nos.
(vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Single phase preventor, Dry run protection, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant. | - | Job | - | - |
| 1.03 | Making and fitting of MS Common Header 200mm Dia with suitable size Blind flange for both ends of MS Common Header. | - | Job | - | - |
| 1.04 | Supplying and laying of 3.5 core 95 sq.mm aluminum armored cable from transformer to MCP (Motor Control Panel). with suitable copper thumble socket etc. | - | Metres | - | - |
| 1.05 | Supplying and laying of 25 sq. mm x 3 core X 1.1 KV grade with ISI mark XLPE/PVC insulated and unarmored flexible copper Cable from MCP to motor terminal box with suitable copper thumble socket etc. | - | meters | - | - |
| 1.06 | Breaking of Old PCC foundation and removing of all residuals from pump house to outside with lead of 200m with all tools and tackles Complete, and lifting of old 20HP VT pump set with column pipes, line shafts from intake well including all labors, tools and tackles etc. all complete. | - | job | - | - |
| 1.07 | Chemical earthing 3 meters and 80mm hole size with electrode and chemical compound etc. with watering pipe and locking arrangements including soldering, riveting, jointing G.I. flat strip 50mm X 6mm to all equipment or as per direction of E/I | - | job | - | - |
| 1.08 | Supplying and fitting of lightening arrester suitable for building protection with Earthing Electrode, Earthing Compound, copper wires and earth work etc. all complete job or as per direction of E/I. | - | job | - | - |
| 1.09 | Supplying and fitting of 90watt LED street lighting luminaire with pressure die cast housing and toughened glass cover, operating voltage range 100V-270V AC with structure, stand, clamp, tee, wires and switches etc. all complete | - | No | - | - |
| 1.1 | Supplying and fitting of 415volt S-D-F FN 200 Ampere TPN main switch and SS enclosure suitable for DIN Fuse link with HRC fuses make L&K/ Havells/C&S with all Labor & tools and materials installing at pump house | - | set | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ8A.pdf
Tender Documents • 3.47 MB
BOQ_157671.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .